Rear Blade Adjustment Preferences

   / Rear Blade Adjustment Preferences
  • Thread Starter
#81  
Skid shoes or tail-wheels are usually what heavier blades use if you want more precise control of loose material
Understood, and I do want a blade that has side shields and skid shoes as an option which is why I bought the one I did. However, for me a tail wheel adds complication, cost and reduces maneuverability when a lighter blade will accomplish the same thing.
 
   / Rear Blade Adjustment Preferences #82  
Understood, and I do want a blade that has side shields and skid shoes as an option which is why I bought the one I did. However, for me a tail wheel adds complication, cost and reduces maneuverability when a lighter blade will accomplish the same thing.

That is a really nice blade!! Have you tried adjusting the top link of the 3 point hitch? If you make it shorter the edge will not cut in as much and if you make it longer the edge cuts in more. This theory also applies to when the blade is swung 180 degrees which is better for smoothing loose material.

Just trying to help.
 
   / Rear Blade Adjustment Preferences #83  
I'd add a hydraulic tail wheel before going with a light blade,
but that's me.
 
   / Rear Blade Adjustment Preferences
  • Thread Starter
#84  
That is a really nice blade!! Have you tried adjusting the top link of the 3 point hitch? If you make it shorter the edge will not cut in as much and if you make it longer the edge cuts in more. This theory also applies to when the blade is swung 180 degrees which is better for smoothing loose material.

Just trying to help.
Thanks, yes I shortened the top link to get it to lift enough to transport. I'll keep using it while I look for another one so maybe I'll get more comfortable.
 
   / Rear Blade Adjustment Preferences
  • Thread Starter
#86  
I'd add a hydraulic tail wheel before going with a light blade,
but that's me.
Yes, hydraulics would be nice but I don't have any rear remotes so cost of adding them and hydraulics will be more than having a light and heavy blade.
 
   / Rear Blade Adjustment Preferences #87  
Yes, hydraulics would be nice but I don't have any rear remotes so cost of adding them and hydraulics will be more than having a light and heavy blade.
Gauge wheels will make your nice blade work the way you want for less money than a cheap lightweight blade.
 
   / Rear Blade Adjustment Preferences #88  
I HAD that exact Woods blade. What a piece of junk. Could NEVER keep the bolts tightened. The bolts eventually broke, I replaced with grade 8 bolts. Still could not get bolts tightened to keep blade angled. Traded in for another Woods blade without the extension option. Very happy with new blade.
 
   / Rear Blade Adjustment Preferences #89  
I also have that blade. Totally agree the bolts are a complete joke. I finally mounted a side link to adjust the tilt. Lost the offset but well worth it. Its not a super heavy blade but it works surprisingly well.
 
   / Rear Blade Adjustment Preferences #90  
Rigid rear gauge wheel(s) with a top link cylinder equals hydraulic gauge wheels.
 
  • Good Post
Reactions: bgr
 

Tractor & Equipment Auctions

2022 ALLMAND LIGHT TOWER (A47001)
2022 ALLMAND LIGHT...
2008 John Deere 9570 STS Combine  Front Duals  Premium Cab  1,704 Sep Hours  Clean & Field-Ready (A48561)
2008 John Deere...
2023 MEC 30-39 ELECTRIC VERTICAL MAST JIB (A47001)
2023 MEC 30-39...
Stihl TS420 CutQuik 14in Gas Cut-Off Saw with Cart (A45336)
Stihl TS420...
2015 MACK CXU613 SLEEPER TRUCK (A45677)
2015 MACK CXU613...
2020 Ford F350 DRW XL CC Crew Cab 4x4 Enclosed Service body (A45336)
2020 Ford F350 DRW...
 
Top