Larry Caldwell
Elite Member
FYI, concrete weighs 3600 lbs per cubic yard. Your counterweight is heavier than you think.
My new Massey Fergusson 4707 is here!!!!
- Thread starter EddieWalker
- Start date
- Views: 14928
OP
EddieWalker
Epic Contributor
I used exactly 25 sacks of concrete that weigh 60 pounds each. The metal frame was just over 100 pounds. 25x60+100=1,600
ericm979
Super Member
- Joined
- Nov 25, 2016
- Messages
- 5,816
- Location
- Santa Cruz Mountains CA, Southern OR
- Tractor
- Branson 3725H Deere 5105
If those were 60lbs dry, there's also the weight of the water that is incorporated into the finished concrete.
OP
EddieWalker
Epic Contributor
How much water weight is added to a sack after it's cured?
Larry Caldwell
Elite Member
Typically 8-10 lbs. Maybe it's not a cubic yard (27 cubic feet)?
Concrete Weight Calculator
Use the concrete weight calculator to see how much a specific volume of concrete weighs.
www.omnicalculator.com
Snobdds
Elite Member
Exactly!
Water has physical properties; Frozen, vapor, liquid...all of which are not present in dried concrete.
We can't get around physics and the only thing present in dried concrete is still Portland, limestone and aggregate. Water was just the ingredient that prompted the chemical reaction and then it's evaporated off as it's no longer needed.
A cement truck is limited to 10 yards due to weight. However a dump truck can haul off more than 10 yards of dried concrete.
DarkBlack
Elite Member
Sure about that?
Concrete is cured, not dried.
I believe a good majority of the oxygen, and hydrogen of water mass is chemically bonded in the Portland cement in the chemical curing process
Snobdds
Elite Member
Are you sure?
Curing is a temporary process where as dried is when the hydration process is complete.
Bring a better semantical game...
DarkBlack
Elite Member
Snobdds
Elite Member
listening to you, one would think curing concrete never stops indefinitely.
