Help deciding on a grapple.

[Rvrrat14]

I have an Armstrong Ag 64” on my Yanmar YM347. It is heavy and well built. It, by far, if my favorite implement. Moving brush and trees is a breeze. Don’t know where you’re located, but Armstrong is in Brenham, TX. Within your budget.

 

[Torvy]

I wouldn't buy anything from that pallet forks dot com site.

They are a Chinese importer and use an address in TN to sound legit. They sullied the name of Titan Equipment so badly that they changed their name to Ironcraft.

Literally the last place I would buy anything, and I am cheap.

‐‐------

Agree 100% on the type of grapple needed. The clamshell style has its benefits, but the root style is better for logs, imho. I often use mine to hold logs level at waist height and cut them to length.

 

[JeepHead]

I have the Homestead Implements Pinnacle series root grapple with clam shell. It's a beast of a grapple that I use mostly for logging and cutting firewood and it works very well for that. I have carried some heftt logs out of the woods with it and then hold the logs at the splitter so I can cut to firewood size. I also use it to clear thick overgrowth around the property and it works amazing for rooting into the ground and digging stuff up. No regrets choosing his grapple.

Pinnacle Series Root Grapple - Rugged, American-Made Grapples

Discover the Pinnacle Series Root Grapples, perfect for clearing large limbs, dead trees, and boulders. Available in multiple sizes and colors for Cat-1 tractors. Order now for reliable land maintenance.

www.homesteadimplements.com

 

[M59]

I would like to purchase a grapple for my 100 horse tractor. There appears to be a ton of styles/brands/sizes out there.

What about brands? The stinger (depending on size) is a little more than I wanted to spend. CDI or Stout? Budget is $3K +/-

I purchased a 72" Bradco root rake in 2016 for $4,600 for the M59 TLB which has a 75" track width because I want the grapple to pick up everything in the tractors path so I don't run over what I want to remove. I scale at 10K+ lbs with loaded tires, grapple and backhoe.

I think your budget is light for a 105 gross hp tractor weighing somewhere between 5,700 to 7,700 lbs.

For gathering brush, debris, trash, you want the widest possible opening to grasp the greatest amount in am single bite, particularly with cleaning split wood of the ground. I've attached the Bradco spec below.

Second pic is Siberian Elm with my hand to give some idea of log size. Third is saw logs. Forth is mouth full of rocks. Last pic is moving tree tops. ps. I have no idea why images posted in reverse order.

 

[sd455dan]

My 2 cents, a flat bottom L grapple 65-70" wide. Fan of non tied tines, easier to penetrate a slash pile or do construction clean up. The flat bottoms allow wood or other material stacking.
I have a round tine model that the tines can be replaced or removed for picking up large square bales. Extensions can be slid over as well to increase the length so even more debris can be carried.
Also like that it is solid backed so nothing will be jammed into the Grille.


I Like the Faver grapples if I was looking for a slightly different grapple than what I have now.

 

[jwmorris]

I prefer a solid plate like in #7 if branches and such are on the "to do" list. More difficult for them to contact the tractor if they have to go through plate steel first.

 

[In.the.Piñons]

Thanks for all the replies, photos and suggestions.

My biggest problem right now is finding anyone that has one in stock. I'm expecting a call back on a MTL demolition/rock grapple tomorrow. It's a little narrower than I'd prefer (80 vs 84") but ordering anything is going to be a 6 week wait (which IME usually turns into a 12 week wait).

I'm not going to use this grapple to dig into the ground. I just want to be able to pickup stuff that's on the ground (firewood/uprooting sage brush/picking up windfall), in the same footprint of the tractor (7ft).

The MTL grapple I'm looking at is about 1000lbs and made from 1/2" thick 50,000psi steel (I believe, but will have to verify). Is that still too light duty for my Kubota M5?

 

[1 Old Man]

I have the Homestead Implements Pinnacle series root grapple with clam shell. It's a beast of a grapple that I use mostly for logging and cutting firewood and it works very well for that. I have carried some heftt logs out of the woods with it and then hold the logs at the splitter so I can cut to firewood size. I also use it to clear thick overgrowth around the property and it works amazing for rooting into the ground and digging stuff up. No regrets choosing his grapple.

Pinnacle Series Root Grapple - Rugged, American-Made Grapples

Discover the Pinnacle Series Root Grapples, perfect for clearing large limbs, dead trees, and boulders. Available in multiple sizes and colors for Cat-1 tractors. Order now for reliable land maintenance.

www.homesteadimplements.com

OP, at least look into Homestead grapples. I use a Pinnacle root grapple with a 73hp tractor
and it has held up really well. I've picked up tree trunks, pulled sticker vines out of trees,
moved logs vines and limbs into stacks to p/u with grapple. Dug out and pulled out a
few smaller whole trees.The more you use it the better operator you'll be.
Btw, Homestead delivered on time. It arrived the day they said it would be here. Delivered
to my farm. (you will need pallet forks to unload from truck). Good luck in your search.

 

[In.the.Piñons]

OP, at least look into Homestead grapples. I use a Pinnacle root grapple with a 73hp tractor
and it has held up really well. I've picked up tree trunks, pulled sticker vines out of trees,
moved logs vines and limbs into stacks to p/u with grapple. Dug out and pulled out a
few smaller whole trees.The more you use it the better operator you'll be.
Btw, Homestead delivered on time. It arrived the day they said it would be here. Delivered
to my farm. (you will need pallet forks to unload from truck). Good luck in your search.

I did take a look at them, but there are two issues, at least as far I can tell. Or am I missing something?

1) The tines are spaced too far apart for cleaning up that pile of bricks or "catching" sage brush like the video linked in my OP.

2) The tines are turned up at the end which, while better for digging, is supposed to make it more difficult to slide under stuff that's on the ground.

Good to know they deliver on time though!

 

[Torvy]

Here's where I got my CID. Great guy. They ship, but I chose to pick it up because it was only a few hours away and mine fit in my truck bed.

He probably has inventory in stock.

Lonestar Equipment, Denton, TX.