Recent content by radioman

sounds like either you are really low on hydrualic oil or a blockage in hst oil flow. how the hst oil level look?

pull the pto lever back and HOLD it while trying to start. i assume you already made sure the hst pedal is centered. it doesnt matter if you are in the seat or not . everything else is not needed to start bx. I wouldnt worry about the battery since you can hear the clicking of fuel pump.

Happened in my town. I'm pretty sure the boat is supposed to be in the trailer , not in front of the truck! :eek:

I used this to cut metal roofing. does nice job. i used it on gutters and downspouts too.

My BX24 60 inch mower deck had a couple bolts stripped and spindles threads was ruined. I think i got a little overzealous :ashamed: with the air impact when tightening them since last summer the blades were spinning and not cutting from one of them. I had a bear of a time trying to take them...

ok - im back inside from working on the BX. first - need to admit a blunder. :o when i at first connected the negative side of tester leads yesterday i used the "wire that i thought was a direct ground" but it was in fact the coolant sensor connector. :ashamed: anyways here what it looks like...

ugh.. not a good week. first off yesterday i went to plow the snow and i had hard time to starting the BX after glowing 30 secs 3 times. so i said screw it .. crank on it till the any compressions makes enough heat to start. got her started. started to plow 5 feet and then POW! my front left...

guys - i bought a ram promaster with Gross vehicle weight rating 8,550 to 9,350 lbs . my registration says 7k weight. I want to tow my 16ft dual axle trailer for work and trailer is rated for 7k gross. I guessing with this combination, ill be over the fmcsa dot weight rating system of 10,001...

I just got the letter in the mail today about a mandatory campaign notice and it also comes with a sheet with instructions how to check the jam nut. I cant help but notice in the pictures it has the BX25 not the BX24.:confused2: Basically kubota wants me not to operate the tractor if the seat is...

As spring is right around the corner and I'm patiently waiting for it to warm up- I been thinking about the gardens right now. This year I plan on adding horse manure to my garden to improve the clay like soil from a nearby farm that is literally 5 mins from me. The farmer says he has BOTH aged...

Ok- need your help guys. I got a metal homelite super XLAO . I am 80 percent sure the coil is bad. I wanted to get another coil, but my search on the internet and ebay shows various wild prices for the blue coil a94605. On ebay - from the same guy randy he got them listed at $506,$411,$307,$ all...

hieght knob doesnt turn counterclockwise. Always lift deck all the way first before moving knob. If you find you have to adjust again.. I think you have a broken nut on the adjustment bolt. My was broken off after few years of use.

Yeah I would too. I been manual swivel for several winters now and counting. nice job and its a good start.

Long story short - I just hooked up my 16 ft landscape trailer to my kia sedona couple days ago to pick up a cub cadet tractor to fix for a freind. I checked the tail lights to make sure its all working before heading down the road and no lights. what?! Was working beginning of the summer. So I...

I just saw this video this morning --- Video Captures Moment Truck Launches Off Highway . I cant believe how he went off the highway with the trailer and mower on the back of his truck.