Search results

I think its a mudhole where the water collected and it sunk while it drainied in these two spots.

Had one blow up in my face when I was a kid....I didnt know any better but my stupid father should have. He was in the loader trying to start it after a boost and I was the one clamping the jumper cables. Apparently there was alot of gas....and BOOM. Acid all over me, my face and clothes not...

Isnt that the point? It looks like those suggesting the missing 4 bar link will not only offer more stability but it will shorten the cylinder travel length. I tend to agree that bucket was not designed for this type tractor-it was designed for a skid steer. This setup offers way to much...

I got my PHD four years ago:)

Have-a-Heart traps its their name brand. I got mine at Tractor Supply Store.

I know its a bit tight but if you tuck in the chains using bungee cords or rope you do not need spacers. I use chains and I have a 60 inch woodmaxx blower..never needed front chains. Chains are not recommended for steering wheels on almost any vehicle even when they are powered. If you break...

Mine is doing ok only because its always parked inside and i used to wax it with Mothers. But no-most tractors are not painted with good quality paint-that includes implements. My box blade which is powder coated included-however, they will still outlast me.

Its simple, bring back the horses! Oh I forgot, they fart....... Ok, how about we all go back to the 1800s? Oh I forgot-they used coal.....Oh man I give up.

oh man that scares me just looking at it,

I have not changed it yet and its 11 years old-i dont think im very smart. I Will change it next spring...

If it is the gasket, the job to replace it is not too bad. I am an IT guy and I did it myself. Watched some youtube videos-even the Kubota BX is the same process (watched the lumnha acres channel when he did his a couple years back.) I messed up a little when I removed the outer hub-its made...

It could be seeping from the pivot seal, I had to replace mine last year, wasnt too bad of a job.

Have a heart trap with cut parsnips, then dispatch it as needed. Works evertime for me.

I've never had an issue with my robot 40v and Milwaukee 12 and 18 volt. Store them correctly and make sure you give them a full charge before your project. All are lithiums... My drone lipo batteries will drain 75% after a few days so I always remember to either keep one charged or charge them...

I can feel mine lock with my foot. I slooooowly spin or go forward\reverse until it hits the sweet spot then I throttle it up.

I think it would be better for the lawn, it leaves fertilizer behind for the following year. The leaves get so thick on my lawn it would overwhelm the mulcher.

Etna NH meets Etna Maine :) I am in between you both as the crow flies-expecting it to go down o the 30s at night next week briefly. I am curious about the label that says actuator rod was shortened in 2019? Was that a recall or home engineered?

I dont think so but I remember watching a movie "Matilda" where a drill was used to roll back the odometer :)

Ryobi really is a decent tool manufacturer and they are improving every year. I am a Milwaukee fan and heavy user but even some of the Milwaukee tools are over priced junk just like the Dewalt and Rigid. I can just imagine all the Milwaukee M12 and M18 tools I have being junk in 5-10 years as well.

Its quite simple really-just don't judge me :) It could be worse, I could be a gambler, sex, alcohol, drug addict or even a smoker. Im also a gadget nerd...I need help but one thing is for sure-if something breaks, or needs fix and even needs to be remodeled-I have the tool for it. If I dont...

Post is a little dated, I also had same issue and disconnected for one winter. I didnt like the ID so I bought the new updated gear assembly from dealer with better lubricant inside and so far after three winters it has not done it since.

I will try to next time Im in the garage, hopefully its not to hard to get to or see.

I used my Husqvarna and three bin bagger, even with the extra capacity I still had to empty them like 20 times. I have one more round to clean up then its time to winterize the garden tractor and bring out the walk behind snoblower. This year I will just be using the loader with edge tamers...

I get my NG from Nova Scotia, hopefully it will stay steady.

Watch out for goat poo, there may be seeds from the invasives.

I have a different perspective on needs...my tractor is 22.5 hp with 19 hp at the PTO. The only time I found it lacking is when using my 60inch rear mount Woodmaxx snowblower in 21 inch heavy wet snow. Not lacking in what you might think either...I feel it needs to be bigger and heavier at times...

Reminds me of when a wolverine took down a polar bear once.....dont under estimate the GC :)

As long as that rim doesn't wobble there isn't anything to be concerned about. The hubs are casted so other than shims it can't be changed. It could be the rim too...try swapping wheels to see if it makes a difference just out of curiosity.

Just had my 16KW natural gas Generac services-5th year. I am having them add a wifi monitor this year for 325 bucks-includes one year of montoring-it has the EVO 1 controller.

By default an Italian is oil and vinegar only! Mayo or any other condiment is optional.

I have the Titan clamp on forks, I think they are 30 inches long...clam right on the bucket. Most useful tool I ever bought second to the tractor.

I have a 24hp BS on my 48 inch and it has plenty of power even in heavy wet grass.

None-I personally care less about celebrities and their status quo-that includes spoiled actors, musicians and politicians and professional athletes. My version of a celebrity differs from most-they are my brothers and sisters serving the United States military. The cops and fireman who risk...

No, it shouldn't hurt anything-just make sure the couplers are clean and free of any debris. Its the nature of hydraulics in a dirty environment.

I used my own 1979 Dodge Monoco that I bought for 600 and replaced intake gasket, u joints, torsion bar, brakes and patched rust with fiberglass. Did this all with my lawn mowing money back in 1985 when I was 16-17. Passed first test...

Im thinking about using my 401k to pay off my house early next year. I will pay 10% penalty fee and they will deduct state and federal taxes which comes out to this as an example. If I remove 100,000 out of my 401k, that means they will hand me a check for 65,000 dollars. I would have to...

I cannot attest to the R4 or R14 but my GC2410 with turf tires has a better ride than my Husqvarna 24hp yard tractor. I dont use my GC for mowing because it will compact the ground over time and kill the grass. To soften the ride on my yard tractor I did reduce the tire pressure.

I am now forced into retirement because my job let me go due to COVID and lack of work after 23 years of loyal dedicated and hardworking service as a senior IT tech. I am almost deaf so I its virtually impossible to get back to work because most want someone with excellent communication...

So far I moved 45 plus, 18 yard truckloads of sand, dirt, gravel, loam and stone dust using loader and box blade. Only thing I regret is not having a traverse to level it out better.

Congrats, I m still in love with my 10 year old GC2410.

Yes thats the one :)

I would like to dedicate a hurricane name after my wife.....'nough said.

At first it looked like something from the Homco line of vintage snowblowers.

Had the same happen to me when I misjudged a Milwaukee M18 skill saw. On a sale of 1-10, pain is 20.....and now I respect battery operated tools very much.

I use mother car polish both plastic and metal.

Yes they did, one attached to the casino and one across the street. They are building something else now too...cant remember. The one across the street they are building a strip mall of sorts behind it.

I have a Casino just 7 miles away-only go there for the restaurants and sometimes slot machine entertainment. We have not been there since the pandemic started, sometimes I feel bad for the addicted gamblers. Evan if you do win Uncle Sam takes alot.

I love my GC2410, told my wife if she ever divorces me she can have the cars and the house but the tractor stays with me.

My Husvarna had similar issues, put seafoam in tank and a little in carb a couple of times and 7 years later hasn't done it since. a few years back I installed a fuel shutoff near the fuel filter and before storing I run the engine and shut the fuel off until engine starves from no fuel. I...

I have not had the need to fill my tires. My BH adds ample weight and in the winter my 700 pound 60 inch woodmaxx snowblower and rear tire chains make it a formidable winter beast. I may add the MF weights to the front for better steering while snowblowing, but a loader full of wet snow is...

I had my GC2410 for 11 years now and I have been using it to its full potential with box blades, posthole diggers, backhoe, and 60 inch rear snowblower and of cource loader and loader forks. I only have 300 hours but I have moved 30 plus, 18 yard truckloads of sand, loam, gravel, silt and...

I stick with CASE brand oil for 10 years now.

If I didnt have my NG Generac I would go something like this and use it with LPG. Gas is a pain in the behind....especially if your only going to use it a couple times a year. This also has electric start. Champion Power Equipment 10,000/8,000-Watt Electric Start Gasoline Propane and Natural...

I have a lock n lube and Milwaukee m18 grease gun-works very well. Used to have a pneumatic grease gun but always had to be near the garage compressor to use it.

They claim that when you finance with AGCO you have warranty and insurance....so if he financed with AGCO, yes it should have been covered. I knew it was a scam. We did have another member here who forgot to engage his parking brake on a GC2610 a few years back-rolled down and embankment and...

Yes check the cooling fan, only use rabbit mode if you going from point a to b with no load-do not use rabbit mode when working-this will def. make it run a lot hotter. You must be able to see fluid in glass viewer. Hoses will get hot...that is normal. Check your brake is not engage as well...

I just had a similar issue with my 05 Jeep-was a 10 amp fuse on the vehicle for tow lights. Everything worked on the Jeep and on the trailer everything worked but the running lights.

How does the HST fan look? Its on the Drive shaft....

Are your tie rods seizing up? My GC2410 will do that when the bucket is about max load.

This is a great question, always protect yourself. As for me I would ask cash only or go with the buyer to the bank and cash the check.

Easiest way to fill it is "patience" I refilled mine with thicket gear oil and talk about sloooooow.

Generac portable generator safety recall. Generac Recalls Portable Generators Due to Finger Amputation and Crushing Hazards

Not sure but I do know my Craftsmen Snowblower was a Husvarna with the Craftsmen name on it. My Husvarna tractor was build specifically for Sears specs. The deck for example can come in three different models for each depending on where sold. If sold at a dealer that is authorized to repair...

I did on my 48 inch deck-was useless for me. So I bought a lawn mower jack from Harbor Freight and I clean the deck that way.....sooooooo much better. I still have the added nozzle but I don't use it anymore because it really didnt work.

Yup happened to mine-I put seafoam in the carb and in the fuel, ran it for a bit and it cleared up. Make sure your putting ethanol additives and storing it right in the winter. I even added a fuel shutoff so that when I store in the winter I hadd fuel additives and shut the fule off letting...

This is a very good point-If your going to upgrade it should not be in the subcompact as he already has a subcompact. My dad upgraded his 26hp Kioti to the 36hp-its like night and day. He has 87 acres of land to deal with.

Give it to Talleyho8 after the brush with the IRS.

Oh man are you new 1700 model users spoiled, Tilt steering LMAO. Whats next, a handle on the hood? More ergonomic loader joystick? JK-I wish I could help but I dont have that feature.

IM hoping its something simple instead of the spline issue.

Same here-I keep them on all the time now.

Nice, I am due for coolant flush next. I changed all the other fluids last year including the front axle.

I have a 22.5hp MF with the Woodmaxx 60 inch. It does a very good job and I usually go WOT or at lest 540 rpm. I dont use weights in the front but if I do I fill the loader bucket with snow. If I did it all over again I would go with the 48 inch Woodmaxx instead of the 60 inch though. Only...

I love this one-bring it everywhere. Got it as part of my Milwaukee heated winter jacket. Amazon.com: Milwaukee 48-59-1201 M12 Charger and Portable Power Source I have 5 M12 batteries if I need them when not using tools. I also have a redbook charger, and can also use my three LiPo drone...

Sometimes my PTO is locked on my YTH2448 and I cant start it-I get nothing. Have to reset it a couple times. 600 hours so 4ar.

I love the trio in Top Gear and The Grand Tour. This was pretty good, its too bad Amazon nixed it :(

is 7 of 9 there?

I have had two Honda ATV, the Foreman ES and currently the Honda Rincon. The Rincon is 118 years old and so far only rebuilt carb, replaced tires once and batter 4 times. It so reliable in fact I just spent 900 bucks on new Bighorn Maxxis tires. In your case for pulling and low center of...

600 hours on mine, bought at sears back in 2006(15 Years). Paid 1800 with mulch kit and 3 year extra service contract. Didnt buy the 3 bin bagger until 2012. I will likely keep using it for another 10 years. My dad and my three neighbors bought the same model-and my neighbor across the street...

i am no expert but you will have to make sure with all the appliances you will run that yourmain service coming into you home is at least 7 water columns. This refers to the amount of pressure it takes to raise a column of water 1 inch. There are 27.7 inches of water column (wc) pressure in 1...

I saw Bigfoot yesterday while at my camp-Please donate to my paypal and I will tell you more. Maine Sasquatch (Bigfoot) Sightings | Strange Maine.

You only need one..the one that works.

Microsoft releases normal patches every second Tuesday of each month at 10am PST (called patch Tuesday). Sometimes they will release and out of band patch if its critical outside of of this date.

Hearing aid wearer for 20 years now....I started out buying my own, first pair was crappy Miracle Ear. Friend said I should go to VA and try for 0% and at least get free hearing aids-was the best thing I ever did. We also discovered that military service is why I lost my hearing and incurred...

I have the Ryobi 40volt brush and brushless trimmers. Have 4 - 40v batteries, 2 are 2amp and 2 are 4amp. Had the brush one for 7 years-no problems but the weed Wacker is too much of a pain to reload and could not find a suitable mod for it. The quick attach setup is a dream-can use all my...

My Husqvarna I bought in 2006-600 hours, so far replaced the battery twice, deck bearings once under warranty, and deck belt-everything else except the consumables is original. Still have original drive belt....and it still runs like new and still starts up first crank-also doesnt burn oil or...

I think it can lift over a thousand pounds but you will need more ballast in front than an empty loader. When my snowblower is full of sticky wet snow the front end will be very light so I fill the bucket with heavy wet snow.

I have a woodmaxx SB-60, 60 inch snowblower (as seen in my avatar)on mine-no issues...rises just like my boxblade and I have it controlled using the 3ph tensioner to slowly drop. My only gripe is that the darn 3ph lever is so low on my right side-makes it a struggle to snowblow-someday soon I...

Your PC or laptop must be signed in to your Microsoft account now to get updates(outlook or hotmail). Its under account protection...

Businesses have to protect itself in many ways, external threats, internal threats and disasters. Lock down is a must...my last organization was locked down so much that to work on a server or server issue you had to have a valid trouble ticket. then you logged into a vault app using a token...

Been a Microsoft Tech\Engineer for 25 years-there is always haters and complainers:) If you want it upgrade to it, if you dont, you dont. Dont need to preach your whys and whynots to others nor do you need to put them down. I still dont like Linux very much and unfortunately-Micky soft is...

Most of us are suffering some sort of supply and demand pain these days. I have been waiting on new washer for 45 days and counting. Have to go to the laundromat-hoping by July 16. Good luck!

QQ-How many hours on the tractor now?

oh man those Mainers know how to ruin everything :)

I would just use electrical tape so that they will never come off:) electrical tape...its not just for electricians in my garage.

You will have to weld it on, if\when I have to do the same I will weld the new tooth on. I do have a MIG welder, if you dont you can take the bucket off and bring it to a weld shop.

HST is smooth and efficient, it also allows for easier operations because most equipment is not just drive only. There are several things going on. Those saying HST is problematic or cause power loss are living back in the 60s. Take for example the Komatsu D71-24...this is an HST off a 271 hp...

I think its crazy to pay for more than 2,000 for a machine to mow lawns unless you making money using it. I paid 1600 for my Husqvarna on 2006, I have 500 hours on it, and only replaced the mandrel bearings once and the mower deck belt once. I have gone through three batteries so far and it...

Sometimes you have to look at cost vs duty cycle very closely. You either have to be very rich or have a huge lawn over 10 acres to buy expensive riding lawnmowers. I paid $1700 with mulch kit and 3 bin bagger for my Husvarna yth2448 back in 2006. Still starts up first crank, doesn't burn oil...

Yes still has a slight leak. Even took it to the dealership and all they did was clean them up a few years back.

Thanks for the info...I will most likely have to do the same soon.

I was walking under my willow tree last year looking at the pond and frogs next to it. All of a sudden I felt a painful sting and followed by a burning sensation on the top of my head. I am very hard of hearing so I didn't hear any buzzing...so I thought I was having an aneurism. Started...

I was once on the fence about COVID and the vax. Had a great friend of many years, served in the military together pass away from COVID two weeks ago!!! He moved to and was living in Natal Brazil at the time. The messed up part was he was careless, became lock down defiant, always with...

Had Pfizer, did not make me cranky but I did have headache and sore arm. I get the second one tomorrow.....will try hydration for sure...

Mine will leak from time to time, I just clean them up and it stops leaking for a while

I also Have a Pouln gas chainsaw but never use it.

Climate change is happening for sure but the science behind it is flawed and confusing as well as corruptible through politics. But that's not what concerns me the most...... One thing that concerns me even more is we still have enough nukes to destroy this plane 100 times over with the push if...

All I need to complete my tool set and be rid of my compressor (already got rid of my small engine tools like the chainsaw) is a Milwaukee finish nailer and plainer.

I would say I doubt my skills more-my box blade is 48 inches and most of these holes are wider than that. I was wondering if the scraper blade-a 60 inch might get the job done quicker. I will try it again as soon as things dry out and i can take of the snowblower. I still may buy a 60 inch...

Only for a few short years :( The new ones are made by VM Motori-an Italian company-I think they make the EcoDiesel in the RAM Trucks to (not the Cummins for the RAM 2500 but the one for the 1500.) 2007-2009 Jeep Grand Cherokee CRD Immediately after the demise of the Liberty CRD, Jeep made...

In my experience do not use rubber. On a hot day if you happen to park so your tire is on hot rubberized crack it will mold into your tire tread. When you take off the next time it will pull up with the tire and not only damage the asphalt more it will also damage your inside wheel well. I...

Good Day to You; I have a lawn, about 1.3 acres that has many shallow holes (no more than 8 inches deep) that need filling in. I have a Massey Furg C2410 with a 48 inch loader and a 48 inch box blade. Has anyone done this with a small tractor and what implement would you recommend? I would...

Nice write up-thanks for sharing.

im in tears----way to cold here now and next couple of weeks will be warmer but way to muddy to play with tractor.

The new owners of Jeep scare me though(Fiat) They even just radically changed the style. This is my third Jeep but I will buy again-used. I have to have the Hemi though. I wish they still offered the Mercedes Diesel-now its Fiats Diesel. I dont know-maybe I should give the Italian version...

At the place I got let go from in February we used to have Sexual Harassments Training, Identity Theft Training, Phishing, Smishing, SPAM training, Medical election training, Identity Theft training, Gender training, Black Lives Matter training, Elderly Abuse Training, Money Laundering Training...

Yeah there is some gearing thats diff in the transaxle, this was confirmed last time I asked the question. Still wanted to know if it was ok\safe to run my GC2410 at higher throttle to gain HP. But it does look like the extra HP is gained by the gearing and not so much the injectors.....the...

I still love my 2005 Jeep gran Cherokee Limited. Everything still works, has a small evap leak I need to fix but no rust. !40,000 miles on it but since I just lost my job she will have to last a few more years. Owned her for 14 years, thats 10 years with no car payments! I didnt own her that...

Luckily I have healthcare from the VA and National Guard (after age 60). I heard about Christian healthcare from Tractor Time with Tim channel. He talked about what they did for him hen he had his heart attack.

Nooooooooooooooooooo!

Yeah-my age and salary had a lot to do with it in my opinion. But good news I have many options and none of them require I go back to work.

Yes I have been recording everything for 4 years now because I wanted to retire at 55 and live half a year in US and half in South Brazil. I have a spread sheet I created for record of both countries. I may be able to pay of all debt including home mortgage by December-really hoping.

Yes I do when she is not here-I am totally independent as she is. I think she just doesnt realize the value a tractor has or is because she doesnt use it :) I told her the hot tub in our back yard just wouldn't be there if it wasnt for the tractor along with the many other projects that were...

LOL

I think his ability to keep his private life quiet and people speculating is very good :)

I lost my job day after MLK holiday. Came back from a 3 day weekend and found a 1 on 1 meeting with the boss scheduled Tuesday morning. When I dialed in I was greeted by my boss and an HR rep who both told me due to a business decision related to COVID my position was being terminated. Since...

Hes sharing his own life experiences. I dont know him but I do respect the fact that he not only makes his life public but his work as well. With so many keyboard warriers out there its sure to spark drama. Much like the dedicate couch potato sports fan experts shouting and cursing obscenities...

Yeah it worked fine for me yesterday and I even double checked it but not today. Here is the corrected link-just go down to guest user and select "view books". Welcome to AGCO Parts Books

Login It list all parts and part numbers for all AGCO tractors and AGCO equipment and its free to access.

Hi; is there such a thing as a Quick Attachment kit for these tractors?, I thinks its called SSQA for short? If there is do you have a recommendation, I am assuming it will have to be aftermarket? I cant justify buying a whole new tractor just to add this capability if there is a kit available.

Technology- When I was young I started out as a metal fabricator-loved the job but didnt see a long term future in it. Then I went into logging, had my own skidder and equipment-was paid well until I needed equipment repairs and new equipment. One set of chains for my skidder was 2,000 for...

I did a quick search but decided to start a fresh thread in case of changes in opinions anyway. My 11 year old original battery seems like its about done, I am willing to fork over the $$$ for a better battery or should I stick with what Massey has on it now(if I can find it)? I have to keep...

Hi; Just wondering-i have a 60 inch Woodmaxx 3ph snowblower that is pretty loud when engaged. I verified it is not my tractor and tractor PTO. The loud growl seems to come from the huge impeller. I verified the recommended oil and oil level in the gear box and lubed the chain regularly with...

2020 has been a very interesting year so far. COVID 19 has eroded the American way of life a little bit each month. For example, it took me 4 months from the time i signed the contract to the time they arrived on site to install the siding because Certainteed had at one time shut production...

By far the most useful item I have for my tractor is a set of 30 inch 1500 pd Titan bucket forks. At less than 160 bucks delivered its become the go to attachment for just about every job around my home. I really dont know how I managed before I got them. Yesterday was a hot day, and I had to...

Hi; Ive been using power tools since in my early teens-a long time. Last weekend I decided to replace a deck handrail because it warped out of place by 8 inches at one end. Once I removed the old one I cut to length a new piece and mounted it with one deck screw. I realized my cut was a...

Yeah toys my ars! Stop saying that... Best Deck Foundation Ever! - YouTube

What I have been doing is removing 50 year old firs. Tractor capabilities never ceases to amaze me. Screw those idiots who believe these tractors are just toys. Saved me soooo much sweat and hot sun. Got it away from a very busy road so I can dry them out and use them in the firepit. Newly...

I have two LED lights rated at 30 watts each. Was wondering if I could tap them into the rear marker lights so i can control them with the current switch on the dash? is it too much draw and are the wires capable of said draw? My only other solution is to use the auxiliary connector in the...

Check out this vintage 13 hp tractor... YouTube

Was wondering if this would be worth it, I can use my Backhoe hydraulics with a remote. Supposed to be able to have down pressure as well but that may be beyond Sub Cat 1 specs meaning it might bend or damage something? I would like to use it to adjust forward and backward tilt of my box blade...

Replacing front axle pivot seals on both sides....then changing all fluids, all filters and lubing. Had to use some JB Weld to rebuild the surface where I pried to hard to split the hub open :( Hey I'm an IT professional not a mechanic.

After 10 years of ownership I have my first failure, the brake side front axle pivot seal is leaking. I bought the shop manual but it doesn't explain how to replace the seal or how to remove and assemble that part of the axle. Im kind of disappointed in the repair manual and I think I mat have...

I Finally ordered the service\repair manual, 144 USD...Cant wait!

Diesel machines are outrageously expensive to buy. I would never buy one just to mow the lawn....the decks usually wear out first anyway. Gas engines will give you the best bang for your buck here for those who have less than 3 acres. I have two acres and my 24hp Husqvana with a 48inch deck...

I agree, My Honda Motorcycle and ATV dont handle Ethanol at all. My B&S handle it well as long as I winterize them correctly.

Pondeing the TSC tiller but not sure if I should go 4 feet or 5 feet? I will also buy the 5 foot rake to smooth out what the tiller dose or is a scraper better? My plan is to smooth out my 1.5 acre lawn this summer.

Its like being on a tractor with no brakes and you see the ravine ahead in the not too distant view. Do you turn off quickly and risk flipping over the tractor or do you keep going strait hoping the tractor will stop. Was planning on retiring this month or in two years early but wow....talk...

I bought a force logic press tool for copper pipe and PEX fittings. When they installed my new Furnace they used Viega Crimp fittings and no solder joints. Same thing when they added heat to my office in the basement-all press fittings. I like to be able to fix just about anything in my home...

I really like the new commercial especially the one where the family is sitting around the table saying grace. More American than John Deer commercials LOL.

Left out now that the 1700 series are out :)

I love what I can do with my GC2410 so much Im keeping her. I need some more lifting capacity-pallets for 1 ton pellets. I dont need a backhoe attachment, just a quick attach loader. Thinking about putting the 60 inch snowblower on it as well so I need a cab. Any Massey recommendations? I...

Just bought these forks from Amazon for my little GC2410-excited and worried at the same time. YINTATECH 43 inches Clamp on Heavy Duty Pallet Forks Adjustable Stabilizer Bar for Loader Bucket Skidsteer Tractor 1500lbs Capacity...

Allow me to start; GC2410 County Line Post Hole Digger with 6 inch and 12 inch augers 60 inch Wood Maxx 3pt Snowblower 38 inch County Line Box Blade Edge Tammers Extra LED lights Berco Soft Cab Tire Chains 48 Inch Lawn Aerator

Have a torn boot on the tie rod end of the steering cylinder(loader joystick side of tractor). Was hoping someone would have instructions on how to replace the rubber boot?

I have a fairly new lawn in my back yard where I took out a 30 foot in ground pool and filled it in with 2 and 1 gravel and added about 4 to 5 inches of organic loam. on the edge is about a 20 degree slope also about 5 inches of loam. First two years the grass I planted come out nice and...

Just an FYI to anyone replacing the fuel filters on these tractors. I replaced mine last weekend and remembered I had a tough time getting the hose connected to the out flow part of the filter. After replacing it I couldn't get the tractor started. Wasn't getting any fuel in the line, so I...

So was looking at ZT mowers to replace my aging Husqvarna YTH2448 (420 hours) and because I have many trees and obstacles to mow around. Depressed because no one would sell me one because of the 25 to 30 degree slope above my pond. I think I found an answer but its 4,000 more than what I wanted...

So was looking at ZT mowers to replace my aging Husqvarna YTH2448 (420 hours) and because I have many trees and obstacles to mow around. Depressed because no one would sell me one because of the 25 to 30 degree slope above my pond. I think I found an answer but its 4,000 more than what I...

My 48 inch Husqvarna is getting old-bought it in 2005-6. I am looking at replacing it so I am torn between the mid mount mower on my GC2410 or a new zero turn 54 inch Huqvarna or Cub Cadet. The dealer suggested the new 60 inch mid mower for the GC1720 series (one you can drive over to mount)...

Time to take the Berco cab, Woodmaxx snowblower, tire chains and Loader edgers off :) This year will do a complete tune up including hydraulics-maybe even a new battery. Im still on the original and unless I keep the trickle charger on it can barely turn the motor on a warm day. Battery is 9...

oops I meant this one...

It showed up for me

Guess this is directed to Forum IT, I missed when this was separated by brand.

Today I was backing my 60 inch woodmaxx snowblower to the 6 inch mailbox post and in my warped mind I thought I could get a little closer, then just a bit more, a little more-BAM, auger takes hold of the metal post and literally slaps my tractor back and forth, side to side until I had the...

i love my Woodmaxx SB 60 and loader combination but my neck is hating it. Anyone have any ideas on how to snowblow with a rear mount without killing your neck?

I just had a 7kw solar system installed and was wondering if anyone has tips and tricks on getting 10-12 inches of snow off them without damaging or scratching them? i am a newbie at solar so even other resources would be greatly appreciated.

Looks like I finally get to install my new tire chains tomorrow, gonna be a big one but its NOT the snow depth Im worried about but the ice everywhere we have now. This is going to be very interesting LOL, never put the chains on before so I hope installing them goes well.

Snow storm dumped 10 inches of the heaviest, wettest snow I have ever seen. Each shovel fool was like it had a 50 pound bag at the end of it. I have three snowblowers that were useless, just dribbled the slush out the chutes so I ended up using loader with the edge tamers and a shovel...

Can anyone recommend tire chains(snow) for the GC tractor turf tires? Looking for something that will cause as little damage as possible to my driveway.

Was just wondering same thing for my GC2410....I have a 60 inch moose ATV plow I have used in 8 years. Was going to sell it but if i could somehow mount it to my loader bucket I would have an awesome snow machine t go with my 60 rear snowblower. Any thought on how to mount this with out...

Mentioned this to my dealer last week when I picked up oil and oil filter. He asked me how my GC was running and I said fine but I do have to disconnect my tac in cold weather. He said its common and ordering another gear pack will fix it. I ordered the part-86 bucks, should be here tomorrow...

I still need to get 80\90w oil before I can try it but I am apprehensive on the GC2410s ability to lift when auger bites and turn in clay. One of the reasons I got the 6 inch auger. By the way...when putting 4x4 pressure treated posts in clay should I treat it with something?

Wife and I are in planning stages to move to Brazil. We will sell everything, house land, personals except for the GC2410. The place we are moving to is in the country and we plan on growing Mango, Lime, Coconut, Guava, Lemon, Cashew and Papaya which is why I need a small tractor. Any ideas...

Whats the next series up fro the G2300/24001700 series subcompacts? Possibly looking to upgrade..hopefully has a BH option.

As far as I can tell the 2400 and 2600 are identical engines, pumps etc right? The only difference is the tachometer gauge and possibly the fuel pump is tweaked on the 2600 series. Why cant I always run my 2410 with RPM pegged so I can get a little more horsepower?

Can't find what this is for anywhere, just came on yesterday.

Well, learned I cant get my new cab out of the garage until I chop off 2 inches from the Berco cab-stupid garage, always have some limitation with the height:mad:. Then the feet that come with the SB60 is way to wide and snags on everything, damaged my hot tub patio. When I hit the hot tub...

Saw a quick youtube video on a GC1705 titled home made niveleuse grader. Cant post link now as Im at work and they don't allow youtube access. Man this is sweet....whoever built it is a professional for sure. Anyone on here know this person? Perfect for grading roads but I wonder if there is...

Got the cab finally installed...not pretty but gets the job done. Used universal bracket kit and did not drill a single hole. I have installed two led lights, chute electric motor and deflector electric thingy:) used aluminum brackets to squeeze mount to rops. Pto shaft was tricky, used...

Just finished installing the cab and extra led light. Let me know if you see something wrong.

Have the GC2410, was wondering if my loader can handle offloading a 760 lb snow bower from a freight truck? Plan to have backhoe attachment on when I do.

Does anyone have one of these yet? Im thinking about it, mine has over 300 hours on it.

Had my tractor since 2010, made my wife very upset when I brought it home. After all our projects (and we had many of them), I felt I would make her happy and sell it as I am caught up with all my projects and then some. I sat her down yesterday and told her I would sell the tractor and use...

Last couple of months have been rough on my water system. My 27 year old in the well water pump gave out during a snowstorm. Well driller came out and replaced it the very next day($1400)-I even took the opportunity to upgrade from a 7 gpm 1\2 horse pump to a 10gpm 3\4 to help with irrigation...

Only one more payment to go and its all mine. :dance1::dance1::dance1:

Had a DA day yesterday doing simple maintenance on my tractor. Changed the oil and ait filter along with the oil. Started out normal but got sidetracked after my wife said I was out of beer. First mistake was after draining oil and inserting new oil filter I pourd in new oil-got half way...

I can only tell you from experience that more damage can be done to these engines but running the rpm too low under a heavy load. Especially stalling it under heavy louds on the motor. These engines have an optimal rpm that they need to run cooler and moreefficient-check your owners manual...

Does it mean its time to sell her? Im not messing it up by not using it much?

400 Hours almost :)only one carb adjustment needed and nothing else. Still cuts great.... Ttile is wrong-she is a YTH-always get confsed there.

Anyone have any ideas, trying to build a small pond under the willow tree but hit a snag. The soil is primarily clay which is good for pond, bad for Backhoe. Every scoop I get fills the bucket and I have to stop and chisel it out which is time consuming and lots of work. At this point it is...

Anyone have any ideas, trying to build a small pond under the willow tree but hit a snag. The soil is primarily clay which is good for pond, bad for Backhoe. Every scoop I get fills the bucket and I have to stop and chisel it out which is time consuming and lots of work. At this point it is...

I asked this question a while ago and got some great answers but with a front snowblower\cab attachment. Tractor will be paid off this year but I need a new furnace so Ill stick with no cab and a rear mount snowblower for now. Three quotes, one a used frontier 52" rear with electric chute...

Im at 170 hours with the GC2410 and she is still purring like a kitten. Shudder is back and I have a slight hydraulic leak on a couple of couplers feeding the loader. It has done alot of heavy work by the way as I posted in a prevouse post. As for the shudder, I am hoping that there is no...

So, I am up to 160 hours on my little GC 2410. Only additional attachment I have is a TSC box blade and so far here is what I've donw with it; Project 1; Planted 27 trees, most are now over 8 feet high. Project 2; Sloped an area of 300 feet from 6 feet high elevation difference using 16, 14...

When you look at the deck from underneath the most forward blade should overlap the rear blades when they are at the same level as seen in the picture. If not then you either have the wrong blades or the wrong mandrel. If they do overlap some and everthing is in alignment according to the...

Anyone have any ideas on how to add more snow capacity to the loader? I know its current design matches the capacity of the tractor but I think the tractor can handle double the capacity in snow?

Its true, I only need to put mine in 4x4 1% of the time. However, for things like towing, plowing, dragging a 1200 pound moose carcass-4x4 is a must. My Honda Rincon 650 tows that pile of would up the hill with no effort-and its green wood but because the gravel is softish it has to be in...

Hi Guys; Was clearing some small trees today in order to clear a path around my property border. Came across a small rut while bulldozing the trees and I noticed it had a very hard time pushing even the smallest diameter tree. After several attempts I was getting a little agitated with the...

Hello from Southern Maine; I am replacing my 47 year old Chevron #2 Oil boiler and origionally was considering the viesmann vitola 200 and an external water tanks; http://www.viessmann-us.com/en/Residential/Products/oil/Vitola_200.html Now I am considering a whole house pellet boiler...