Search results

Bindian, The deal is done on the 8560. Dealer is giving me same as I paid for 5500 trade in and I got the rest. Should be in the barn late next week or the week after as wife and I are going to NOLA for Anniversary trip to French Quarter Festival in a few days. It will be serviced and few minor...

I need longer leads on my Miller Thunderbolt AC/DC machine. How long can I add to the factory leads and not cause any issues with power loss or changing the power setting?

Need a PDF for Cab 8560. Dealer wants too much for OEM Manual, says will take a while to get it anyway. TIA Rod

I have a 3Pt LMC 2422 HD Disc that cuts almost 9'. All my MFWD 5500 (55HP) wants in good ground. If I could have a do-over, choice would be 2420 (24 Blade-20" Diameter). The big blades have a deep concave and will not cut as deep in new or hard ground.

A 8560 w/ loader? Its low hrs, one owner that traded down for smaller cab Mahindra. More tractor than he wanted to haul to hunting camp. Clean with wood trail boo-boos, dings and scratches. I need it to run like a racehorse [emoji237] , but work like a mammoth mule [emoji191] ! Dont want or...

All you Mahindra Gurus out in Cyberspace- Got a headscratcher for you. 5500 4WD, old style with shifters on top of tranny, has a green light bottom right of tach (at bunny feet) that comes on intermittently when in work clothes. Not running too hot, oil is fine, RPM@ 15-1800, fuel level good...

Just picked up a LMC 2422 HD Disk Harrow to replace OBH Disk (Old Busted Harrow). It is not setup correctly and the gangs need to be aligned as well as all bolts torqued. I saw the guys assemble one at the plant and it is not trued up, just stuck together and snugged up. I plan on aligning the...

I have the Limbsaw, bought at the Farm & Gin Show last year in Memphis from the owner. My unit weighs 90# and works great. Priefert does the manufacturing and he sells them. Very useful tool that will keep woodlines and trails clear up where Chainsaws can't.

When the stabilizer bar is installed and set, it should keep the PAT straight enough to hook up. In the picture, it looks like there is slack in the lift arms and the lower arms could rotate in some to line the PATS up with whatever you are hooking to. BTW- My PATS are cock-eyed too

If you are going to use it in the woods and on trails a lot go boomless. If open areas mostly a boom will work if not too many obstuctions. I have a 2 head boom on my UTV that is as wide as it is, sprays about 8'. Use a boomless on the tractor that covers 24'

Go to the TBN store and buy a tilt meter. I put one on the 3510 to keep the Backhoe level and it also has saved my rear a couple of times as well. Best $40 I have spent since buying a Lock-n-Lube!

JerryK, I posted in the Mahindra site as well and got 104 views with ZERO replies!!! Apparently the Mahindra cab owners are riding around listening to their favorite tunes and not cruising the internet?!?! :confused3:

Looking at a 2565 and a 2555 Cab tractor for mowing in the summer heat. Getting a little long in the tooth and not as tough as I used to be! Any comments from owners, dealers or anyone who has a Mahindra Cab tractor would be appreciated TIA Rod

Looking at a 2565 and a 2555 Cab tractor for mowing in the summer heat. Getting a little long in the tooth and not as tough as I used to be! Any comments from owners, dealers or anyone who has a Mahindra Cab tractor would be appreciated TIA Rod

BobG The 5500 4WD has 800 Hours- 500 when purchased. It is a good machine and simple. You are right. I need to keep it and put new tires on when the old fall off! kneedeep

Posted on Mahindra site with 78 views and 0 replies, maybe do better here! Found a 7010 w/Loader & cab- 2008 model, new injector pump, 1250 Hours, one owner. Asking $24500. Want to look at it and need some advice from any 7010 owners as to things to look for that may cause repairs down the...

Found a 7010 w/Loader & cab- 2008 model, new injector pump, 1250 Hours, one owner. Asking $24500. Want to look at it and need some advice from any 7010 owners as to things to look for that may cause repairs down the road. Not expecting a perfect machine, just what kind of issues are common to...

I put down 100 yds of 'road base'- mixture of sand, clay and large washed gravel, some up to 1" and rolled it in lifts. Crushed stone cost as much as ready mix here. Nearest pit is 100 miles. Washed gravel is abundant .and reasonably priced, The 'pea' gravel I top dressed with is 1/2"+ and...

This is the Almost Deluxe Southern Constant Airflow Version!! :laughing: It has a Ventilation Fan on the side! :dance1:

I could not find a Wind # in the literature, I'm sure that Reeds would be able to answer that based on location and structure. Maybe some will remember the carport that served as a temporary shed for the tractors, it has stood up to several wind events and is nothing compared to this structure.

The crew finished Sunday afternoon about 3:00 and had site cleaned up and tools loaded by 4:30. I had looked everything over well and other than a couple of screws here and there, did a great job policing up. Brandon and I discussed how to extend and add on for a future Shop wing. I would...

The Bar Joist are 10' O.C. with 2x6 purlin 2' O.C. The roof metal is screwed 16" O.C. All the components tied together create a very ridged and strong structure. At one time there were 4 men on the roof in one area and there was virtually no movement as they worked with only one side of the roof...

Crew came back Sunday to finish up. The weather was clear and they got after it early.

If tree limbs are the problem, eliminate the low limbs where you mow. I did after being face slapped on time too many!

The guys worked in wet dreary conditions till noon then after a break, finished the trusses, purlins and one side of the roof. All that activity really made a mess of the beautiful pad but I tried to dry it out before they came back Sunday to finish.

The crew was scheduled to start Sat AM June 4, So Delta and I came over on Friday PM. Ran into a little rain south of the farm but forecast was thunderstorms till mid morning Sat. Well, it rained Friday night after midnite with lightning and high winds so bad that I considered trying out the old...

After the pad was roughed in, had to head home for a Memorial Day weekend with my kids in USAF at Augusta, GA (Brad married Collen who is active duty USAF in April this year) Had a great time BUT there was at least 6" of rain in 4 days there. So when I got back to the farm, had a big wet place...

Had the farm 5 years next month and seems I have spent most of that time recovering from 3 Left foot surgeries, 2 Right knee scopes/cleaning and finally could not take any more pain so here I sit with my new Right knee and a lot of staples with ANOTHER long recovery ahead. Enough with the bad...

I have several old implements that are still usable. Each one can operate as designed, some still need some work to be best they can. I will eventually repair all to excellent working condition, maybe not best looking but usable.

How about Big Boy Toys?

I agree with bspeedy about a 3pt backhoe if you don't have heavy soils and big digging projects to do. Used with care and respect will give you a lifetime of good service. I had lots of heavy digging in tough gumbo soils, brush grubbing, ditch work, stump removal, waterline, septic system, etc...

He probably pulled on that throttle out of frustration and shot that workhorse in the air :laughing:

I don't use a auger (agitator) in the tub for that reason. I mix seed and fertilizer as I load or just fertilizer and don't overfill the hopper. When it is on, the spreader throws only to the rear or which ever side I have it set for (usually for center). Very little gets on tractor and none on...

Try to build something like these

The BH is one of the most used attachments on the farm next to sprayer.

Pats and a longer Top Link- Best for different types of equipment. Easy to hook and unhook Adds 4 inches to Lift arms

Another Bamer Trucker!! :eek: In the Hammer Lane no less!

I have owned 3510 for 15 years and the only issue I have ever had was the fuel filter leaked and I just put a inline filter in and use clean fuel. Put a backhoe on it couple of years ago and have used it for everything possible. Not too much it would not do as far as mowing, loader and pulling...

Looks like the 511 may be what you are looking for, nice backhoe.

Tough as a old boot

The 5500 4WD started leaking fluid from the top of the steering column. It continued to leak until the fluid level got low, but not too low. If I fill it to full, it will pump it out of the top of the steering column. There is a bushing in the top of the column but I cant get a part # for just...

The 5500 has a Great Bend Loader QA system that uses pins that drop down and held by spring pressure. It would be almost impossible for them to come 'up' and release during operation. They are tough to unpin and will bite your hand if not careful!

How about from Alabama?

May be a old thread but I just bought a 7' HD LMC with 60HP gearbox. The sides are channel iron and the deck is 1/4" plate with plenty of bracing. Pulls through thick stuff like hot knife in butter. PS- tractor speed should match what you are mowing Thick- slow Thin- faster

I have a Howse disk and bent one of the crossmembers at old hunting club when it hung on a big pine. I took it off and bought a thick wall tube, had it cut to length amd drilled the bolt holes. Replaced all of the arms and added 100 lbs to the disk. Pull it with a 5500 4WD and it works good...

It is a Taylor Pasture Dream 5' drill made in Miss by the same company that makes the Taylor Big Red Forklifts. Still family run. The dad started with a log dog based on a surplus 6x6 truck to drag logs out of the swamps to the Dummyline RR. He then made 3 versions of the Pasture dream- 10",15"...

Sounds like MONTYS may be a option to look in to. My problem is the Delta has been so wet that most field work has been impossible, especially in natural wet areas like I use for the duck holes. Heck, even the deer fields that normally stay dry got under water after over 15" of rain in 30 days...

Put a 509 on the 3510 and its the best attachment I ever bought. Don't use it all the time but when I do it is priceless. It will dig holes, fill up holes, lift everything I can get the thumb around, pulls, pushes, loads and unloads equipment, digs ditches, cleans up ditchs, the list goes on and on.

Brant Greiner from Washington, IA I have used knedep on my truck tag and email for years and saw it on youtube and thought it was cool!! :thumbsup: https://www.youtube.com/watch?v=Eczgtk9yY1g

Got the IH 900 Planter with 2 sets gears. Need a manual for it if any one has a download or knows where I can get one.

Local guy has a couple of cut down 2 row no till planters for sale and I could use one and would like opinion on them- one is a 7100 JD in good shape with only one seed plate each for beans and other is a IH with offset coulters with 5 sets of gears for each unit. He has parts for the IH as that...

I'll open with a Pair!! :cards:

Like this?

Hung the rear gang of my disk on a tree and broke the bracket. Have broken bolts before with smaller tractor but the 5500 jerk a knot in it! Thinking of cutting off the top broken section and welding a angle the same thickness overlapped on the remaining bracket, Drill 2 holes and couple of...

Utility Row Crop Side By Side Need one of each to -'Get'r'dun'!! :thumbsup:

Utility 3510 with Backhoe for dirt work and 5500 for farming

This happened to the company next to us- seemed truck driver left truck in neutral idling and did not chock the wheels

oopsy!!!

Old Square truck mirror mounted on canopy brace- works pretty good

Mahindra 5500 4 WD with loader needs weight on rears. Each tire holds 50 gallons of liquid. We get freezing weather several times a year and defiantly need antifreeze solution of some sort. Looking for suggestions as what is best to use in tubeless tires. Beet juice is too costly. :confused:

What is the proper coupling to connect male to male couplings on 1/2" hoses?

Under the Porch till a Equipment Shed is built later this year!

Any good Tractor mounted BH will install leach fields, water lines, etc if you keep digging till its done! The 509 Mahindra on a 3510 will do everything I need done AND take it off- hook up implements and mow, disk, seed, blade, lift, plant, etc. For 5 acres, A TLB would work of any make. I...

My wife has her own tractor. Now that I have one of my own!!

Over in the Delta- Nite rangers!!

Mahindra 5500 4WD is leaking fluid from top of steering column under steering wheel. takes a little time to start and will drip steady. I have not removed Steering wheel yet. Any ideas of what to look for to repair??

My 5500 4WD has developed a hydraulic leak at the top of the steering column. It takes a little while to start but it is a steady drip. I looked online at a parts breakdown, there is no seal at top of column, so it must be in the lower unit. Any suggestions?? Also, the idle seems too high...

How to tell if a new tractor's on the way You can "smell" a new tractor coming two or three years ahead. The first thing a wife notices is that the thrill - of the old tractor, that is - is gone. He no longer fondles the fenders, caresses the hood. No more does he run in the faze of a storm to...

Paid $3600 erected for 24 x 36

Any one built or had a Pole Barn built from 6x6 post with steel truss like these? I have a 40' Container already with enough room to build 50'-60' shed beside it. Could build a lean-to over the container with app. 8' overhang at door end and 2' on other by erecting a pole shed 50' x ...

Best ATTACHMENT for a compact tractor. It is the replacement for shovels, picks, post drivers, chainsaw, limb shear, etc. I got the subframe/BH made for my tractor. Remove it just like I would drop the mower and hookup to another attachment. I'm sure the day will come when most of the big jobs...

I measured my new PATS and they extend the lift arms 3.5". the bottom of it requires at least 2.5" clearance from the back of the ball socket to attach, hope this helps.

How I Post a Photo- Reply to thread, below Additional Options click MANAGE ATTACHMENTS New Window opens, click ADD FILE click BROWSE find your picture(s), click, open click UPLOAD the picture(s) move to bottom of window click INSERT INLINE bottom right the picture is inserted in the...

EHHHH?? Where you calling me?? :confused3:

Just bought Mahindra #2- So all the toys have to 'share' a bedroom! :eek:

Another idea- We use a popup to hunt different setups. Wind, trail deer are using, neighbors corn pile (LOL), etc. Can also use in orchard when fruit comes in early in season and as long as deer using area. Have a 'temporary' (not attached to ground) blind 8' platform box on big greenfield...

off the tractor with a pump output of 7 gpm and have enough power to work? If it will, what type of valve would be needed? :confused3:

The 3510 and my wife and partner- Ms. Ankledeep- The 5500- Latest addition to the toybox.

Check this out PATS carryall; greenwellmfg - Home

Tractor was shedded since new, used mainly for mowing, garden prep and wildlife food plots. Serviced regularly and very minor dings on hood. Only downside is it was driven 9 miles to his hunting camp to work on pavement. Rear tires are 50% and fronts are 75%. Once I start working it next spring...

Got the 5500 delivered Saturday. Got the forks but Grapple is on order for custom toolbar to fit bucket. Packed it in the shed with the 3510 /Backhoe and the Kawasaki mule. Barely enough room to get to the door! A equipment shed is the next project to get veranda back.

First 2 pic didn't post of the planter I have. If you can find one they usually are less than $1K (I paid $350 for mine w/o lid and seed gate mechanism worn out) Not mine but shows the mechanical seed gate that is usually worn out

Be on the lookout for a Taylor Pasture Dream or Pasture Dream Seeder. These old units will plant anything no-till into existing pastures or food plots. You can double pass plant on a diagonal ( 20" row spacing) They can be modified with a hydraulic cylinder to operate the seed gates

:number1: Those are the drilled food ploys and these are broadcast- both after 2 weeks

I bought a old Taylor Pasture Dream off CL, fixed it up and planted deer mix in soybean stubble. Very pleased with the results but still need some tweaking to get it right. Planted 2 acres the old way- disk, broadcast, cultipack, Drug the old shooting house out and tuned it up Set it up...

This first year to plant deer fields on my little farm. Got into Duck hunting 5 years ago, everybody knows once you do quack you don't go back! :eek: My son and his fiancé like to deer hunt where they are both stationed at Fort Gordon in Augusta, GA and I wanted to fix a place for them when we...

That is one sweet piece of machinery- I'm jealous! :drool: I can't justify that expense for the few acres I plant for Wildlife foodplots. I use a OLD Taylor Pasture Dream to plant commercial Deer Mix (50% wheat) in soybean stubble. It does a pretty good job. Drilled Disked, broadcast...

What is going on with the 24/7 Owners site? I have been able to access it using a old link with the 3510 serial # but can't get in it now. I was able to download the Owner and Loader manual for the 5500 just last week but the link I used no longer works:confused3:

I just got one 40' delivered and waiting on guy to find another to match it, Plan is to separate then about 30' and put a roof over both for a shed/storage kinda like this. Set mine in the edge of a 40 acre soybean field.

If you want to fuel your tractor(s), a in bed tank with pump would work. If only to increase truck mileage between fuel stops, I think a under the bed auxiliary tank is the way to go as bed space becomes a issue. I only have the OEM tank on my Duktruk (Duramax). I decided to use a 55 gal drum...

The 5500 I just bought has the Mahindra QA instead of the SSQA The dealer has some forks and hay spears he bought from Mahindra at a discount on his lot. Lot of it is for 265 loader. My Great Bend is a 264. Not much out there will fit up to the Mahindra QA that is not universal (adjustable to...

Just bought a Mahindra 5500 4WD with loader and rears are not loaded. The tread is about 50% worn from driving on pavement. Size is 14.9 x 28. What is involved and what would the estimated cost be to buy a set of tires and rim using the old tires as outside in a dual rear setup? Just curious...

Looking for a bolt on grapple for a bucket or set that will slide on a set of forks. Anybody have one that is easy to remove and works well for cleaning up brush grubbed out with a backhoe /thumb?? Pictures would really help! :thumbsup:

Same field Cross the ditch

This one didn't get away! I was there when it unloaded and jumped all over it before another one slipped away! :drink::cool2:

I use Power Service and Stay-Bil in the on road fuel for the truck and same in the off-road for the tractor. I have had several people tell me to add transmission fluid or 2-cycle marine oil for older engines that don't get enough lubrication from low-sulphur fuels.:confused3: What do all you...

Finally found a good used Mahindra. Stopped by DeltaTractor to get 3510 filters and a 5500 was just traded in on a 7520. Nice, clean, shedkept 03 with loader. It had a leak in steering cylinder, some pins & drawbar missing and 650 hours. Price was right and it will have a new home after a...

Bought a Taylor Pasture Dream off CL cheap because the 3PT lift mechanism was worn and would not adjust. Removed the original mechanical arm and installed a small cylinder to open and close the shutter bar. Worked great!!

I broadcast seed/fertilizer mix from a cone spreader and drag it with chainlink fence with tires tied on top for years at old deer camp. always got a good stand but had to spray, wait 2 weeks, disc the edges, burn off the thick mat of dead grass, disc 3-4 times to get a seedbed. I planted a 2...

Got the 'new' old Taylor Pasture Dream working to plant straight into soybean stubble After one week! Disc, Broadcast, Cultipacker after one week

I read somewhere that installing a larger size power cord on small 110 MiG welders will increase the weld time. :confused: Can a 15' 10/3 extension cord wired in to the unit as the power cord damage it? I just about always use the extension cord to weld small stuff or tack up work to be stick...

Local Mahindra dealer is trying to find a used 50-60 HP tractor for me. Seems not to many available in 4WD which is a must for what I need. He is taking a 2010 or 2011 8560 4WD on trade and has offered it to me when the new tractor traded for comes in (Cab tractor). It is a open station with...

Looks to me like it needs scraping, sanding, priming and a brand new paint job!! Maybe some rims and 22" tires!! LOL

Put a 509 on my 03 3510 last year out the door for 8K. I looked at all the aftermarket and other than the Mahindra (Bradco) I could only get a subframe with a Woods. I would only saved about $800 and would have had to mount the subframe and hook up all the hydraulics. Dealer did everything and...

I am in need of a larger tractor to pull a 1.5 yard dirtpan, mowing and pulling a 5' No-Till planter. Local dealer is taking a used 6530 in on trade next month and I would like to get some reviews from fellow Mahindra owners, good and bad. Only one review on the TBN site and it is a unit with a...

All Hooked up and operational! :thumbsup: Works perfect, never would have got the original to adjust to plant right. Original setup New modern retrofit

Under the front porch

Dang! Could have saved lots $$$$ if I bought to fit old 7K trailer! :confused2:

I prefer non poison snakes as well, don't care too much for the vipers. Caught a big fat black snake slipping across the open yard at Duck camp. Never seen one like it so a few pictures and a text to my Rebel buddy confirmed a Mississippi Mud Snake! Seems they are very secretive and rarely get...

Business next door to us was loading a single axle box truck without wheel chocks. Boss was NOT very happy! OPPS!!!

I have a Taylor 4 row No-till planter just picked up and have a issue with the mechanism that closes the seed and fertilizer gates when lifted to stop seed and fertilizer from falling out when turning or transporting loaded drill, The arm that actually opens and closes the gate has lots of slop...

Just got a couple of 35 gal plastic drums to get off road diesel. They had soft drink syrup in them and now I have it all washed out, a little water is still in the barrels. Any suggestions for the best way to remove the moisture? I got out all I could with a rag tied to a stick but a little...

151 looks and no comments?? come on!! Somebody got to have an opinion!!

Got a nice Taylor Pasture Dream drill from CL and used it to plant sunflower/corn for Doves this weekend for the first time. It has some issues (really, it's only about 60 years old!) that I need some advice on. 1. The shut off mechanism that opens and closes the seed/fertilizer plate is...

Has anyone used a different brand bucket on their 509 or 511 Backhoe? I need a 12" bucket for a LONG waterline install and a new Bradco is over 1k. Wondering if a similar size bucket would work, aware that connection may have to be modified. Just looking for a less costly solution :confused3:

Found a good Woods 12" bucket and need it to fit a Bradco 509. Anybody have dimensions of a bradco pin and space between bucket brackets? My tractor is in MS and can't measure it for a couple of weeks.

Found a Case 885 on CL close to here that I am interested in. Any 885 or similar Case owners out there with comments or issues with these tractors I should be aware of before deciding on a purchase. Always get good info on TBN and hope to get the same now!! Thanks in advance for help :)

Found a Case 885 on CL close to here that I am interested in. Any 885 or similar Case owners out there with comments or issues with these tractors I should be aware of before deciding on a purchase. Always get good info on TBN and hope to get the same now!! Thanks in advance for help :)

I have a 3010 mule and it won't hardly run unless it is warmed up good. Says that in Owner Manual- warm with choke out and allow to cool before shutting off. Also, eliminate lots of fuel/carb issues by running non ethanol fuel with a fuel stabilizer. My gets a workout pretty regular!!

Like this??

New 3510 and FEL in 03. Choose it over a JD and Kubota for price and features. Toughest tractor I have ever owned (I owned JD, Long, 2 fords, IH and Farmall) Bought a new Backhoe this year and should have done it years ago. Never been to a shop except for BH install and 50 and 500 Hr service...

No Kidding!! :D Has been known to swallow tractors, ATV's and pretty girls whole!!! :cool2:

The rear is simple, jack under the front spring hanger to lift and remove the tire. Remove the OEM shackles and place hydraulic jack between the axle and frame to spread enough to install new longer shackles. Also a good time to stiffen the shocks by rotating the shock base with large channel...

Keep the springs compressed and install the Lift Block on the top of the strut. Line the Lift Block up with the original mounting holes and release until they can be removed while guiding the Lift Block into place. Tighten nuts under pan, install tires, hood and pan-

The new springs are thicker and stiffer than the OEM. A inexpensive Strut Compressor tool is invaluable in installing the new spring. Be sure and install the top cupped washer upside down from original mounting. PS- The strut rod will retract when extended, I put a zip tie around the...

Installed the Essex Lift Kit on the Mule this weekend. After doing the left front, I figured it out and the right side only took about 30 min. A few pics and explanation to make it easy for anyone lifting a Kawasaki Mule. The Struts are easy to get to with the tire, front hood and pan removed:

Got the battery changed out and hooked up. Got left side lifted. It actually went quickly after I figured it out. I used a strut compression tool from Harbor Freight to get the strut back together. The directions were not detailed enough but did show enough to get it done. I will get more...

Re: Which Tire is best for a Mule Tansport Got the 27" Surefoots few days ago! After the Xmas doings are done, need to replace the battery and install lift kit. Replacing the motorcycle 12v with a full size battery. Just need to move some fuses and relays around, lengthen the winch power cables...

Just got the new shoes for the old mule! 27" Surefoots with a 2" Lift- Gonna try em on this weekend!!

I would never consider the 3PT strong enough to carry a backhoe attachment, much less withstand the torque that it will put on the arms and connecting brackets. Perhaps a small unit on a large tractor might work but to max out a unit may cause damage if not used properly. The 509 on my Mahindra...

Need to buy used 12" Severe Duty bucket for Bradco 509 Backhoe

Which Tire is best for a Mule Tansport My 3010 Mule transport just does not work in mud with OEM tires.:( I am looking at the Essex 27" Surefoot with lift kit and the Silverback 26" with a lift as well. Wheels mounted to steel rims so OEM can be used in summer months. Both shipped to my zip...

My bruda from anuda muda!!

My little dirt mover

I wondered why a big cargo strap but now I know!! :confused3:

My guess is the extra holes are for using the bracket on a different size bucket or loader in the mfg. process. One bracket fits several buckets / loader combinations and the one it is used with determines where the bushings are welded. My ML112 has a extra set of holes with bushings welded in...

:scratchchin: Project- Weld 2 pieces of pipe together in the yard with Miller Thunderbolt AC/DC machine. Details- Pipe is slightly rusty and dirty 16" diameter 1/4 thick that was cut into with a saw. Edges are fairly clean and straight. Pipe is part of a Water Control Structure that will be...

I have about 20# of 6011 and 6013 1/4" rods that were not stored in a dry place. Can I 'bake' them in a oven to make sure they are dry and then store properly?? :confused: Thanks

Northern Tool has this unit on sale Northern Industrial Welders Flux Core 125 115V Flux Cored Welder — 125 Amp Output | Wirefeed Welders| Northern Tool + Equipment I need a small welder for 1/4" or less material. Mostly a repair or small fabrication around the farm. I have a ancient Lincoln...

By researching and looking at trailers with the things suggested by Chris, I bought from a local Mfg- Betterbuilt in Double Springs, AL and had everything I wanted for the same price as a mass produced trailer with less features. I got sealed wiring harness, LED lights, Dexter EZ Lube axles...

Just added the thumb

Mahindra 3510 with FEL and BH Trailer is 20' + 2'. any shorter and the BH would hang off The pipe is 33' long and weighs 3000#

Finally got the new 509 repaired after the Boom would stay up after the first hour of work. I dug up a flashboard riser that had silted up and after I tried to move to the opposite side, noticed the boom was dragging the ground. When lifted, it would not stay up, just straight to the ground...

I mounted a small tool box to the floor frame on the right side where the FEL control valve is located. can't mount on that side anyway.

Need a fair price for a 509 Bradco Thumb? Already has the anchor welded to boom. Aftermarkets will not fit this BH.

I wish you had posted this about 3 months ago! I bought a 509 Bradco from Mahindra for my 3510 in June of this year. Would have drove up there and took it off for you! I didn't get the pump for mine and it works fine at 2200 RPM. Do you have a Thumb?? Sure would like to get one for the 509...

Just picked up a 7' Brillion Cultipacker and have some questions. The bearings may be froze so I used a IMP tool to inject some Blaster in them yesterday. One takes it pretty easy (push it in by hand on second treatment today) and the other side is fighting a little. Once I get it to the farm, I...

Just picked up a 7' Brillion Cultipacker and have some questions. The bearings may be froze so I used a IMP tool to inject some Blaster in them yesterday. One takes it pretty easy (push it in by hand on second treatment today) and the other side is fighting a little. Once I get it to the farm, I...

You need one of these for moving dirt-

And a lift kit. Thinking about the Essex 27" Surefoots and their front and rear lift kit. Any body have any experience with Essex or any other brand of lift/tire combo? Thanks for any help!

Looking at a MF 43 Grain drill- Any one ever owned, operated or have input on parts availability or general comments? :confused: It looks fair and needs minor repair. It has defiantly been working, but seems to have some life left if not handled too rough. Thanks

I have a OLD Lincoln welder, has a crank to adjust amps. It will weld bigger stuff than I need but it is getting old like me and one day it will cease to operate. I have to put a fan blowing on it since the original never worked since I had it. It welds a beautiful bead if heat is right and rods...

Looks like it has all the important parts and priced right!!

Just got a long weekend that is dry enough to do some much needed dirt work with my new toy (per the wife!), Mahindra 509 Backhoe mounted on my tough as nails 3510. Had 2 water control pipes/risers that leaked and were installed in the wrong place that I needed to dig up. The ground around them...

I have a 3010 Transport. The 4010 has power steering , more HP, generally a improvement over the 3010. The transport will carry all of your group safely and seated (throw the dogs in the back). The bed is versatile and can be enlarged for heavy, long hauling. It has a High Low tranny, so low for...

:laughing:

:eek:

I missed that one :number1:

On highway running 55 in center lane!! Jack legs almost dragging on the road!!

Check the front ball joints and steering cylinder for damage. It may have been used like a Bobcat and heavy digging and turning hard with a loaded bucket will cause damage. Sometimes the PTO Solenoid will not engage if sitting too long- tap it with a hammer will get it going. If the clutch was...

485 and only about 2 on the BH!! too wet for digging!

Chevy Duramax 2500 HD 4WD and 14k Betterbuilt Equipment trailer GIT ER DONE !!!!

I have a Betterbuilt 22' Bumper pull that was built to my specs. The plant is in Double Springs, Al and they are good people to do business with. They will build any type of trailer you want. I would recommend at least talking to them about a custom trailer. I only move the TLB from the farm...

:thumbsup:

Might try this-

Got a couple of stubborn grease zerks on my Mahindra 112 FEL that are getting tougher to take grease. Replaced several and they are still difficult. tried loading and unloading the joints with some improvement. Any tricks to make them take grease short of removing the pins and cleaning...

Ordered Backhoe from local Mahindra dealer- told me 6-8 weeks delivery. Arrived in 5 weeks. 2-3 weeks to get unit / subframe on tractor.

I am soon to be purchasing a set of mounted mud tires for my UTV. I will not need them in the summer as everyplace I will be is dry farm road or improved county road. I plan on storing the mud tires in a dry, dark building and installing them in the fall. Question- What is the best way to store...

Tractors all lined up, Planters already in a row, stacks of Disc and piles of Shredders!! :santahat: My wife told me to grow up and get home!!

QUOTE=DavesTractor;3142689]When you extend the bucket ram all the way, it is at it's weakest point. Hydraulically extending or retracting the bucket only at that point will not bend the ram, as the pressure relief prevents that from happening. But if you leave the bucket ram well extended and...

Trying to catch up with you guys! Waiting on the sub-frame to ship and I will be in be in business! :thumbsup:

Trying to get ideas on establishing a planted / natural duck hole. I can get 6-12" of water on a 1300' x 200' edge of my west field (app. 5.5 Ac) and a smaller round field app.1.5 acres. with some flooded timber. Already met with Biologist and they are pushing Moist Soil -natural vegetation-...

Moving some dirt out of the Duck Holes

What do you plant? :duck:

My mule 4WD transport seems to have plenty of power, but it will not perform in mud! I use it for Duck Hunting in the MS Delta in mostly Agriculture fields, on the levees and tractor turnrows. On hard ground it has no problem but in the real muddy places it seems to just spin the wheels and...

I have a small pan, DP-60 by Durabilt, that I use with a 3510 Mahindra in Mississippi Delta gumbo when it is dry. Works great cutting a few inches at a time. Takes about 50-60 feet to fill. Once the topsoil and organic matter is removed, it is easy to fill overflowing. I bought it used for 2K...

Be sure to flip the right switch! :confused3: :dance1: :cool2:

Saw this on a Hunting Forum I am on and thought it fit here perfect! Enjoy!! Farmer Style (Gangnam Style Parody) - YouTube I see it has already been posted!! It is cool anyway!

Is that a Fire break plow :confused:

when mowing was a problem until the battery tray was lowered! Never got past first mark after several hours of brush and briar cutting! I blew out the radiator and screens that were as full of trash as I have ever seen it and it still ran cool! Lowering the battery box really works!! Also...

WOW What a dirt mover!!:shovel: The Wolverine - Dynamic Ditchers - YouTube

Get you some!!

Found this in Batesville, MS equipment dealer for $4100. If you were to buy one, new or used, I would be happy to purchase it for a fair price after you finish with it! After I finish, I would resell to someone for fair market value. It would really help us who only need something like this...

I am looking for a small Drill for wildlife planting and found a Cockshutt 76 Grain Drill, Ser #84978BX. I can't find much info except it was a Canadian company that made tractors and equipment that became Oliver, then White, etc. The unit looks OK in pictures but ebay has the parts and owner...

Traveling Westbound on I-65 towards Tuscaloosa, AL Monday! Wonder what that load pays? :cool2:

Its ready to pickup! Got the call from Danny at Betterbuilt trailers that my unit is ready to pickup. I ordered it about a month ago for September pickup so I could heal from a foot surgery. Timing was perfect, started walking last week and I am ready to get back to work and play. Need the...

The beast is due for a 500 HR Tune Up. My son was home for the weekend and went down to the lake house where yhe beast lives to get his fishing tackle. While down there he was cranking everything and the battery was dead on the Mahindra. (original battery new in 2003!!). I now will be installing...

I want to share a product that I have used many times and it works GREAT! :thumbsup: Got it for Xmas last year and one of the best and most useful gifts I ever received. Monitor started acting up and returned it to mfg, replaced it and returned to me in 1 week. Works for anything you can't...

With all the post about the "Cheap New Tires" that all trailer builders are putting on equipment, why not buy good LT 10 Ply yourself and have them mounted/balances on the new rims at your expense? I am sure a trailer dealer would deduct at least the cost of a new spare ($125) X 4 and sell you...

Been looking at a lot of trailers. Hope to buy one that will last a loooong time :thumbsup: Down to 2 choices- Big Tex. Dealer in my home town. Did bother to take time to show me a trailer and gave a price before dumping me off at my truck. 18+2 ET, 6" channel frame, 3" crossmembers 24" O.C...

What features would you add or eliminate? I can get a custom built for 5% more than a factory unit. I am going to buy a new trailer for my CUT, FEL and BH (at least 7000# net). It needs to be at least 20' long and bumper pull. My tow vehicle is '06 Chevy 2500HD, Duramax/Allison tranny. Looking...

Any advice on the installation of a Woods Subframe for a BH80X on a Mahindra 3510? Local Tractor repair shop does not want to tackle it and can't find anyone local that works on tractors. I am buying unit from Rossels and shipping to me. saved at least 2K this way. I have read the manual for the...

Trying to chose the right equipment and need some advice. The Mahindra 3510 Hydraulic pump is rated at 7.87 gpm and the steering is 3.57 gpm. Does the steering run off the Hydraulics or does it have a separate pump:confused: Would the tractor operate a backhoe requiring 5-7 gpm effecientl