Search results

I'm having a hard time finding a HST filter for my T494. The manual calls out TYM 15532302100 with a new TYM 19265154110 for newer models based on serial number. Apparently I need the newer TYM 19265154110 filter but I can't find a seller. The tractor came with a WD 724/6 MANN FILTER (Germany)...

I was changing fluids (engine and transaxle) on my JD 445 mower and somehow grabbed the wrong oil container started pouring hydro fluid into the engine. I realized the mistake and stopped after about 3/4 qt and quickly started draining it. The engine was never started and I removed the new oil...

Haven't really needed a hedge trimmer until now but now I do. I'm thinking battery powered because of where I will use it but I need one that has a good battery life, can handle at least 1", at least 24", reliable and good price. Anyone have recommendations? Thanks

Since I relocated to rural living in Tennessee my homeowner insurance has increased each year, especially the past 4 years with home values skyrocketing. My home value is now appraised at almost 250% above what I originally paid 11 years ago and the majority of the increase was over the past few...

Is a subcompact under 25hp engine enough power to maintain a under 15 acre property where the tasks are mowing w/ mid mower, finish mower, brush hogging, stump grinding, hole digging, box blade and typical loader work? I have owned a 35hp and 50hp so I'm a little uneasy getting a under 24hp.

When comparing same model tractors except one with a cab, will the cab hurt performance on HP or will it help with added weight?

In the boating community they usually say change oil at the end of the boating season and before winter. I always wondered what happens to oil during a cold winter. Does it get water in it from condensation? Does the oil quality degrade over cold winter conditions? So I was thinking maybe its...

Was thinking of getting a backhoe for my Kioti NX5010 but the dealer told me I might consider a stump bucket and save some money. Has anyone damaged their tractor using a stump bucket?

I'm tired of buying riding lawn mowers that don't last because they are built cheap and still cost an arm and a leg. I'm thinking of buying a subcompact tractor to mow the property and use it for light tractor work. What are the best ones for this purpose and for the best bang for the buck?

Looking for the best price on Polaris PS-4 liquid gold and ran across people talking about using Shell Rotella T6 Full Synthetic 5W-40 Diesel Engine Oil. That's new to me so just curious if anyone here uses Rotella or has heard of it.

1940 Original Silver King Tractor - $5,900 In Portland TN - LSN Saw this on our local network.

I just did my 400 hour maintenance and was expecting more hydraulic fluid to be drained. My capacity is 11.89 gallons but what drained was about 10 gallons or slightly under so about 2 gallons less than capacity. I did have all the hydraulic cylinders compressed. Is this normal?

So I have a 445 that I want to bring back to life starting with a good replacement engine. It currently has the Kawasaki FD620D but I see online from repowerpros that they will provide a NEW KAWASAKI FD791D 29 HP REPLACEMENT ENGINE KIT FOR JOHN DEERE 445 LAWN TRACTOR for $3,200. I just started...

I served in the military (USAF) for one term plus an extension before an honorable discharge. It was a good move for me since I didn't have any skills and didn't know what I wanted to do in life. The military training and experience got my career started in electronics which was invaluable and I...

Out walking the property with the wife and dog and we noticed this snake near the dog. Not sure what kind of snake this is. Anyone know?

I noticed some tiny red bugs sunbathing on my deck railing today and they appear to be chiggers :mad: I've run across chiggers before but usually in tall grass when cutting wood. The last few days I was stump grinding a few dead oak's and one was not that far from the deck. Is it possible I...

I bought my tractor in a package deal that came with a Titan grooming mower and the PTO drive shaft. The PTO drive shaft has the button release spline on both ends. The grooming mower uses two belts, small one for gear box and large for the three blades. Question: With belt drive do I still...

I have a Titian Implement (now IronCraft) SGM grooming mower that needs a new spindle. I have the new spindle and in the process of removing the old one but I can't get the GUK SELF LOCKING NUT to budge that holds down the pully on the top side. I've sprayed some penetrating oil on it but it...

Anyone have an issue like this? While using my PTO stump grinder in low gear where I need to be able to move slowly the transmission is jerky.

First time using my tractor to dig fence post holes. I need to dig 2 feet down using 9" auger and the soil is red clay and possibly rocks tree roots. Any advice on being successful and not damaging my equipment? Thanks in advance.

After changing my hydraulic and HST filter(s), then adding back fluid, my link lifting arms are stuck in the up position. Everything else in the hydraulic system seems to work fine. Any ideas?

Was mowing on a uphill and all a sudden the tractor bolted forward like a bat out of hell and when I applied the brakes the rpms went down and died when the tractor stopped. It was like the tractor HST changed into a manual transmission without a clutch pedal. Then when I restarted in neutral I...

My local tractor dealer/shop did my initial 50 hour service and now it time for my next oil change but I'm going to do it. So I called my local shop to order my oil filter and I decided to check their prices on engine oil and their recommendation, I was planning to use Rotella T6. They told me...

Does anyone have the model number of the transmission on the NX5010HST? thanks

I had my reverse get squirrely (intermittent jerking) after a long day of bush hogging last year and eventually it stopped working all together. The dealer (not where I bought it) picked it up and returned it saying it's fixed. Then a few weeks ago it started all over again, another long day...

Anyone know minimum storage space needed for the Kioti NX5010 HST CAB with Loader/Bucket? I plan to keep the tractor in a barn but not sure if I have enough free space. I can get the height and width from the Kioti site but they don't list length with loader and bucket.

I have the ck3510H and looking at adding the back hoe. I think the price is going to be ~7-8K as I will also need rear hydraulics. Then there is the thumb option which could add another 2k. I noticed a used newer ck3510HSE (mine is not the SE model) for sale at a local dealer that already has...

Would a 1025R make a better lawnmower on hilly terrain than a x758? I looking for a new lawnmower and see the 1025R with just a mower deck might cost about the same as a x758.

I have about 6 acres of hilly terrain with some pretty steep areas. I currently have a JD 445 that has been working well the past 5 years but the engine is nearing end of life. I was thinking about investing in getting the 445 fixed but then I could just sell it and use the proceeds for an...

I'm looking for a code reader that can be used on all my vehicles which includes a 97 JD 445 lawn tractor, 2017 Kioti ck3510, 97 Jeep Wrangler, 2003 Dodge Ram, 2007 Honda Accord and a 2007 Honda T60 outboard. Looking for one that displays live data and most of the latest handy capabilities...

I have a JD 445 that I bought 5 years ago. The engine goes through a cup or so of oil every 2-3 times I use it on my 5 acres. It smokes pretty good when going up hill. I planned on rebuilding the engine or getting a replacement once the performance started becoming an issue. I think I'm at that...

Where are good front and back tie-down locations for a new ck35? I need to trailer my ck35 over I40 for about 100 miles. Thanks

We all have one thing common, tractors :thumbsup: But we also have another thing in common, computers (including smart phones and tablets) to communicate with our members on TBN. We maintain and protect our investment in tractors and we do the same for computers. So I was just curious what...

I'm looking at buying pallet forks attachment for my ck35. So far I found the Titan 48" forks the best deal at $500 with free shipping and a 5% discount for first time buyer (first item ordered) at Titan attachments. This is their non HD product. I will probably still have to pay state tax since...

Hello all! New member here from Tennessee. I recently bought my first tractor to help maintain some new property I purchased. It's a new Kioti 3510HST and so far has worked out very well. Hope to learn from this forum as well as contribute. So far I've been bush hogging the land as well as...