Search results

Hi The power steering controller at the base of the steering column on our 1996 NH 2120 is leaking too much so we put it in the garage and hope to be able to repair the leak . I’ve never done this before so any advice or suggestions are welcome. I looked at it and thought… I may get lucky...

Hi Our community farm has a 6’ wide bush-hog mower that sees a lot of use. The unit is probably 15 years old at least. Recently it was noticed that a stress crack had developed in the mower deck ribs. The crack runs thru the ribs just in front of the two lower mount points of the 3-point...

My NH 2120 (mfg date 2000) has shredded nylon on the outside of the radiator coolant hoses, this is a disaster waiting to happen. I looked on the dealer site for the parts and they are discontinued. However it almost looks like the hoses from the 1920 will fit , but Im not sure , does anyone...

Hi , We are doing maintenance on a NH 2120 compact tractor with a NH 7309 front end loader. There are a bunch of hydraulic hose quick couplers and most are leaking. I looked at the videos about removing/replacing the internal O-ring on the one side to stop the leaking. Then looked up the...

Hi , Recently Ford NH 2120 (mfg 1990) started this chattering noise whenever it’s put into 4wd . The noise seems to be coming from the front of the front transmission where the driveshaft to the front axle goes in. At this point I’m clueless as to the cause but imagine it some sort of...

Hi I had to replace the alternator on a NH LS190 skid steer. I am installing the new unit but am not sure how to slacken off the serpentine belt tensioner. It does not have a hole for a 1/2 breaker bar which I am told is the standard procedure to grab and pull up on the arm. Instead, on the...

Hi Sorry if this is posted to wrong forum. Can anyone identify what this piece of farm equipment is? Thanks !

Hi I have a ls-190 with a no-start condition. The small wire to solenoid gives 12 volts when the key is turned but the solenoid doesn稚 click and starter doesn稚 turn. Tried whacking with a hammer said starter and solenoid but doesn稚 help. Next move is to jumper the solenoid with a...

Re-sealing your leaking in-line Zexel / Bosch PFR diesel injection pump Is your diesel engine leaking fuel from the block mounted æ’¤FR style Bosch/Zexel injection pump ? The problem is that the rubber o-rings have gotten old and brittle and no longer provide a seal. Fuel leaks around the...

Hi I could use some help here with a repair on a New Idea 5209 mower conditioner that had its roller u-joints broken. One ujoint is still on the splined shaft and needs to either be pushed on further or removed so that the pair can be installed. The problem is that I can稚 get a puller on it...