Search results

I posted a while back about my hydraulic lever not returning back to center when I am using it and lugging the engine untill I return it manually to center. As this seemed to be an intermintent problem I was not overly concerned with it. Things have changed. It is now raising part way, then...

The hydraulic lever on the BX2200 will not return to center. If I lower the mower deck to the set mowing height the lever will stay down. When rasing it will stay in the up position and you can hear the sound you hear when the pump has reached its limit. I have to manually return the lever to...

Has anyone built there own canopy for their tractor? would you share how you installed it and maybe share a few pics? I was given a used golf cart canopy and want to mount it on my L3010 and am looking for some installation ideas:thumbsup: Thanks

Has anyone located a source other than the dealer for a mower belt for a RCK-60B-22BX deck that goes on a BX 2200? the $123.00 price at the dealer is a little hard to swallow:( I was expecting $50 - $60 price range, however I am not having much luck locating one on the net. Do any of you have a...

There is a small allen set screw on the bottom of the transmission. This screw seems to have a small hole drilled in it. I do not know if it is supposed to have this hole or not. But it is weeping what apprears to be hydraulic oil, not much, but will leave a quarter size stain on the shop floor...

When going from reverse to forward direction i have noticed my little Bota seems to "bounce" two or three times before levealing out and roaring off. It only seems to do it if I only PARTIALLY push the peddle (like half way push it down) If I push all the way it does not seem to do it. Is this...

I was given a canopy of of an EZ GO golf cart, I want to mount this on my L3010. I am looking for mounting ideas, and was hoping someone on here has done this before so I can steal thier Idea:D Some Pictures would be great:thumbsup:

was given a 5 foot box blade and (i think) 6 ripper teeth. I do not know who makes the box blade but it does say Ford in big letters on the side. My question is how do the teeth stay in? It has notches in the teeth and it looks like you slide them in the support / holder and choose the depth...

BX2200 will run fine for a couple of hours and then will start lossing power and start sputtering and shaking, i will idle it down and let it "catch up" and it will regain all its power and then do it again in a few minutes. I changed both fuel filters, and added some seafoam to the fuel in...

The original battery finally died on the little Bota, after 8 years. so i need a new one. but the battery does not have any markings on it for me to tell how many cranking amps etc. anyone know what decent (not to expenseive) one to get

During our latest snow and Ice storms people were buying generators incase the power went out ( it did not in this area) I was told by a home depot employee that you can shut off the master switch at the breaker box and plug you generator into a wall receptical and back feed into your house to...

What would cause my loader to be jerky ( kind of bounces up and down while using it) would changing the fluid help?

I have been trying to post some chain link fencing for sale on Craigs list. the add was posted for a day and a half with no problems and lots of replys. Then suddenly I was red flagged and my post was removed. So I reposted, and an hour later I was flagged again. This is not the first time this...

BX2200 with 60 " mower deck. will raise to the #4 position but will not lock in the "top" position, this just started yesterday. I can get it to lock IF I pick up on the deck while operating the hydraulics. is there an adjustment or could something have broken? it raises fine just wont go to...

The support bracket that holds the gear box on the mid mount mower cracked and broke where the bolt holes are, and i need to replace it (left side as your sitting on it) I have two questions; 1) isn't this a kind of a strange piece to have break? I ordered a replacement ($49), kind of...

BX2200 with 550hrs. Got in a wierd angle while mowing my ditch this week end and needed the rear wheels to lock. pushed the Diff lock peddle (seemed rather soft) but the other wheel did not lock in. I can see where the linkage runs to and everything seems to be connected fine, is there an...

Does any one know what size tail wheel is for a 5 foot Howes brush hog? The one I have is missing the tail wheel and needs a replacement. Thanks

Dealer popped up in the area, I was wondering if anyone knows anything good or bad about them? Only thing I have heard is they have a stronger 3 point lift and hydraulics. I would be asking in the 40 to 50 HP range. The advertisements are saying 72 months 0% finacing. just curioius

My wait to start light stays on most of the time, thinking my controler may be bad. was told it is under the dash, but do not know where, or what i am looking for. Any help? Also how do you take the dash off, do the gauges come out as well? Any help would be greatly appreciated:D

Sorry long post: Was doing my spring maintainance of changing the oil and all the filters on the 2200, and started the tractor up to check for leaks. and since I had the engine cover off I notice a lot of slack in the throttle cable, no big deal so i adjusted it ( had since turned the tractor...

Does anyone know where I can find a seat cover for the above mentioned tractor?. Not looking forward to another summer rubbing my legs raw:eek:

Does anyone have ay experince with one? I bought one but am a little leary of ruining a chain rather than sharping it.:rolleyes:

Got an out of the blue phone call the other day telling me that they want to drill for oil on my land. The area is not near my house but is right at where i spent several thousand to around my pond. They are basicaly saying they can drill where they want and I have nothing to say. What are...

Is a 6' angle blade to much for a BX to handle? mainly for snow / ice removal and light grading. any one use this set up? any Pics? TIA

as the title says, the hydraulics are very jerky on the 3 pont hitch as well as the the FIL. I am sure i have the old valve I keep hearing about here. Where is this valve located? and can it be changed by the average do it yourselfer? or are special tools required? any one have a rough Idea of...

I did not want to highhjack the "red maple and horse" thread, but I have a simular question: I have a wooded area that has a lot of oak trees that i was turning some cows loose on, but had a neighbor tell me that oak leaves can kill cattle. has anyone ever heard of this before??? To me it doesnt...

Does anyone know where or how I find a replacement chain for this saw? And yes, I have checked the internet and local hardware stores. My problem is trying to find what chain part Number I need for say like an Oregon replacement chain. any help would be appreciated. thanks

Is the transmission fluid and resevour the same as for the hydraulics, what I mean does the loader hydraulics run of the transmission (HST L3010)

I could never figure out why I could never put 5.8 quarts of oil back In when I did oil changes, it would only take 4. So i am under my tractor (L3010) looking for the source of a hydraulic leak, and happen to look at the oil pan and notice that there are TWO drain plugs not just one. It seems...

L3010 with a Rhino L2408 loader on it. Loader is straining to pick up the front end of the tractor (Like when you are pushing down trying to compress tree branches) and will make that all to familuar "it's to heavy to lift squealing sound" ,then when you go to raise the bucket it will hesitate...

I do not really know what a flail mower does or is, but was thinking it "might" work better for me. Here's the issue: I cleared about 5 acres in front of our place when we built the house. it is very rocky ( not the kind you just dig/ pick up and move) but they are low enough to go over I just...

Does anyone know of a web site to see what year your tractor was built by using the serial number?????????????????????

L3010 - the WTS light will not go off and will continue to stay on while tractor is running. It "may" go off for a minute or two, but will come back on. Any ideas what the issue may be or is it a warning light that is trying to tell me something? I looked in the manual but can find nothing...

What is draft control? what is it for, and how do i know if i have it on my L3010?:o

I have a L3010 HST. that developed a hydraulic leak at the site glass. I keep my tractor in the shop and have to leave a drip pan under it to keep all the oil off the floor and have had to dump it several times as it gets full. It has had this leak for about 8 months. When i look at the site...

Hello all, I installed a new driveway when we bought our house 2 years ago. At the time it was a spongy area and was recommended to install slag from a local steel plant to "bridge" the area, first layer was 3-4" then packed in, after a couple of months 1 - 1-1/2" was added over the packed in...

New here, but have been reading for some time.:D Anyway, I was hoping someone could steer me in the right direction or post a pictue for me. I can not read the fuse box cover on my L3010 to identify what fuses are to what, and since I do not have a manual, thought maybe someone here could...