Search results

I need a trailer and it seems to be the worst time on history to buy one. I think I need the HD rear gate...the trailer will be general use so not too much time w tractor but i dont want ot to fall apart. anyone have any experience w the standard flimsy gate and a 3k lb tractor? I am thinking...

6 x 16 ft. Tandem Axle Utility Trailer 280 | Leonard Buildings & Truck Accessories I cant believe how expensive these things are now- it sucks but all the used ones I have found are beat up and used up. I like the heavy duty gate w spring assist and the 24" mesh sides. anyone see any issues...

last night i was pushing some leaf piles back a little - zero load on the tractor and the rpms fell off , it barely ran then it stalled. i let it sit, it turned over slowly but wouldn't start. i let it sit longer and it slowly started then ran close to normal , then it was fine. scared the crap...

im not much for electronics or wiring but maybe i can change this. i have an old rear floodlight that was added to my tractor that has burned out. it has a black and red wire and is wired so it can only be on when the key is on. could i just replace this with an LED flood light? once i figure...

It looks like 3000 GVW and above is where most companies install brakes on their trailers. I am thinking about a 6x14 single axle without brakes for ATV UTV etc transport. This would be below the 3000 lb threshold but how comfortable are you towing 2500 without brakes? is there a max weight...

the hose is plenty long enough - how hard to cut the hose and reinstall the end coupler? it is a hose for my hydro snow blade. the plow hoses seem brittle /cracked so i will probably get the others replaces soon but i am hoping for something to get me back to plowing today if i need it. - every...

I would like the longer lower tines or teeth. what is a well made unit? i have the front loader QA - I think from a b3200? i have forks for really heavy stuff so for this i would prefer not too heavy or expensive. i will post a pic of the loader connections - i dont know what it is called

I have a Kubota b2920 with the quick attach loader from a b3030. I have pallet forks but would love a brush fork. does anyone make one?

Perforated or not? One is for a gutter and one is for a fire pit. I have done an ac drain that was pcv that ended in a bag of gravel underground. I would like both of the new ones to end underground so our dogs don't have to trot through mud everytime they come in. Thank you

I ripped the hydro hose on my Backhoe's stabilizer. the hoses all seem to be impossible to get to because they are so close together....is there a secret to this?

working in the woods and a sharp branch worked its way up and sliced my positive battery cable. It may have touched the frame - the motor shut off immediately and everything was dead. I put some electrical tape on the cable and got everything connected but it won't start. It now has power when I...

I cut the hydro hose on my BH65 stabilizer arm. any tips on how to replace like what to put on the threads to prevent leaks? How to get to the hose where it connects to the middle of the backhoe? thank you - It looks easy enough but I want to make sure Im not missing something.

I posted a few weeks back about my new 9mm. Turns out I love shooting and I am now thinking about adding a few more handguns. Maybe I cant think of anymore tractor toys to buy. I am thinking about a new .357 revolver like a Ruger GP100 or S&W 686 with 4" barrel or so. I am also thinking about...

I have a paved driveway but I want to put in a gravel road and parking area off to the side. It will go down hill for about 400 ft (8feet wide or so?) and then end up with hopefully enough space for a few cars. it will run through the woods. Do I use the box blade and dig down 2-4 inches to...

HOLY COW. Beretta INOX 92fs 9mm 15round clip. I have never shot a handgun before today and it is a TACK DRIVER. I went with the USA model because of all the finish issues I read about on the Italians. I was pretty apprehensive but watched a bunch of youtube videos on 92fs safety and took a...

I am going to pick up a beretta 92FS INOX next week. I will also get a case, cleaning kit and some ear protection. I am assuming any safety glasses will be fine for the range? I have a gun safe and I am going to get some training/lessons. Also the idea of a lazer sight really interests me but I...

I have been meaning to get a salt spreader for my 1/4 mile driveway and sooner or later I am going to get bit. I have a herd 3pt spreader I could use but I am a little worried about rust on the tractor. It does get used for fertilizer and i have never noticed it getting pellets on the tractor...

Used my County Line PHD today and it was not too much fun. It was very hard to put on inside my barn so I need to build a stand like the ones in Eddie Walker's thread fast. That thread couldn't have come at a better time! The ground was pretty wet today and the mud stuck to the PHD. It was very...

We gave this mower to my mother in law. One day it stopped running and she threw a tarp over it and let it rot for two years! What needs to be done to make this usable again? I changed the oil,, battery, gas and fuel filter. The air filter looks fine. Should I assume it needs new plugs and a...

My rake seems to be bowed or bent. I noticed recently that the center section digs much better than the sides. From the attached pic you can see that the tines on the left side are not touching the trailer floor. Anyone heard of this? Can it be fixed? I cant tell if it is a tine issue or if the...

18ft Holmes 7k trailer, brakes on one axle lift assist rear gates frame mounted tie downs the truck got Tembrens SES rear supports (big heavy duty bump stops that eliminate most rear sag) and a prodigy 2 controller. I bought a maxbrake controller but i did not receive the right master cylinder...

I just had one of these (along with the timbrens SES on the rear axle) installed. any tips for best operation? I will be pulling a 18ft holmes landscaping trailer with a B2920 mostly short distances. Should I adjust the controller for a loaded or empty trailer? Tow vehicle is a 09Ram 1500 Hemi...

I have a few shotguns and am no stranger to hunting but I am looking for my first handgun. I will use this for target shooting to get up to speed with it but I primarily want one for self/family/property defense. I think a 9mm would be a good start for a first handgun but I can see myself adding...

I Need a trailer ASAP for my Kubota B2920. just an occasional short tow for the most part. I want 18ft but I am finding mostly 16ft landscape trailers with reinforced rear mesh gates so nothing can hang off the rear. For anyone that has this setup - does it work? Do you wish you had the 18? I...

After thinking about a TSC unit I am now thinking about this splitter. From what I have read it is made better and is a decent upgrade. How big of a deal is horizontal only? I have some BIG pieces to split but I could use a saw to cut them in half first. Anyone use this splitter? Any comparable...

The big rains last week (and the debris it carried) knocked down my fence. The fence post were in concrete and some of the concrete was broken but most of the 10 or so sections that were knocked down were just pushed over. The holes where the fence was mounted are destroyed. Should I remove the...

I have the B3200 QA (on my B2920) and I have the forks but I want a brush fork with more tines to pick up trash. I found one for a SS. How hard (and how much$) would I be looking at to get a welder to modify it? I would also consider hay spears or any other tines that might attach to my QA but I...

I have a Kubota B2920 and thanks to all the rain my fence is pushed over out back. What is a decent PHD? I would like the best value not the cheapest. Thank you!

I am going to get one of these soon and I have been thinking about the 22 or 35 ton units from TSC (Huskee?). Any others to consider? Just me and a neighbor using it sporadically but some of the trees are pretty big. I have about 40 decent size trees that I need to split right off the bat then...

Looking for some generator knowledge and advice! I do not have natural gas or a propane tank. I don't think I need (or really want) a whole house system. In the 6 years we have lived here we have not lost power for any length of time over a couple of hours, although we do have power lines and...

I think it is. I scraped a spider web off my barn and this little girl came down.

sorry for the general question - just starting to think about a boat! 09 5.7 hemi 4x4 tow pkg 3.92 gears, oil and tran coolers, rated at 10k What is the biggest boat I can safely tow to come in at 10k or less? if its a 7k boat does that put me at a sea ray 28 sundeck or 26 ft sundancer ...

I just got my extra backpack sprayer and filled one up with lesco three way and water (for weeds in the grass) and the other with roundup and water . The roundup is probably 8 years old. Is it still as good as when new? Does it matter how soon I use both of these now that they are mixed?

I have several trees that have been cut up into sections 2-5 feet. They have not been split yet and while I would like to do this eventually I am wondering what the best way would be for me to keep them from rotting. I am thinking about putting them on pallets or a couple of long tree sections...

I dont like the "make your own" wood sides. I am going to get a 18' tandem trailer for my B2920 and I am thinking about a Holmes 18" landscape trailer. I would prefer a car hauler/equipment trailer if I could find one that comes with welded on sides. Even if they are not huge I will get much...

My old tractor had a clamp on brush fork that was really good for small items and branches. My new tractor has the Kubota forks that I love but with only 2 big forks they don't do as well with loose debris. Has anyone added a brush grate or anything? I am thinking about trying to have a welding...

I had one from BXpanded for my BX and it was great! Now that I have a B with a BH65 I really miss it. Anyone want one? It their is enough interest we might be able to convince them to build it. I am sure some will respond to build my own but theirs is a really slick piece. It really keeps the BH...

I have 3 5 gallon containers of each that I keep in a plastic deck box outside. With the temps in the 20s will I run into problems? If so would any problems be solved by moving it inside ?

I used my Kubota front plow for the first time today and it does not seem to go low enough. I read the manual and looked it over but I don't see any way to make it lower. has anyone run into this?Hopefully there is an adjustment I am missing. If not I am thinking about getting the rubber cutting...

I have a B2920 with the Kubota front hitch and front plow. I have loaded ags. Should I leave the BH on for extra weight? I like the ability to extricate the tractor if it gets stuck. I don't know if the overall effect will be more traction or loss of steering ability. Any experience? It also...

A Holmes is almost 3k with the mesh sides. A Kauffman is 2200 but I have to find a place with a forklift or something to lift it off the truck. Anyone get a good one at a good price? it needs to have beefed up ramps but I do not want a car hauler or equip trailer without the sides. I am right...

It is a TRX4 5.7 Hemi with 3.92 gears and limited slip rear. It is very tight and pretty fast. With the gearing it has gobs of power at all rpm ranges. It needs a backup camera bad and the headlights seem a little weak but other than that its perfect for me. I will occasionally tow a 18ft...

I have a bunch of trees that I took down. Most of the trees are in 5 foot sections or so. Should I just stack these up between trees or should look into some sort of pad or base like a firewood stand? I don't know if they will rot quicker sitting directly on the dirt. In the pic below you can...

I have been dreading this because of the weight of the loaded read tires. I tried using dollies but it was actually easier just to lean the tire onto the hub and use the backhoe to move the tractor up a little. It only took about 30 minutes. It makes a big difference in the way the tractor...

I am going to purchase a car hauler or utility trailer when I can find the right deal. Kubota.com shows the tractor at 1390 without loader or backhoe. I think I read that the BH65 weighs 1400 lbs so I would guess the whole deal would be around 3000 lbs or maybe 3500 if the loaded tires are on...

This is probably pretty basic. Although I have become somewhat skilled with tools I have never gotten into the wiring side of things. My tractor has a rear light installed. When I bought a 12v sprayer I used the 12v connection the dealer installed on the ROPS to power the sprayer. Now the light...

I just bought one and I am pretty impressed with the whole set up. It arrived in 8 boxes but very well laid out. They have obviously been doing this for some time. The unit works very well. The only down side is that when you put it behind a commercial mower the whole things is pretty heavy. It...

I have a B2920 that may need to be transported 2 miles away infrequently. My wife's truck (2007 Lexus LX470) can easily tow this amount. I am thinking of a 16 or 18ft tandem axle landscape trailer. Does anyone know the law in Virginia? Are trailer brakes mandatory? I am looking for a used full...

I am having a buddy of mine build this 16x20 shed. Concrete slab with a 8' lean to on the side. I am not putting electric in and I am thinking about getting a generator or battery to power a light or two in a pinch. Because I am not going to keep my tractor in here I think that will be the...

I have been thinking about getting a compost spreader. I did see a few sand spreaders on the Herd website. Would these be a good alternative? I would think if they could spread sand compost would be fine but I am not sure. Sand Spreaders from Herd Seeder

I am in the final stage of converting heavy woods to lawn.

I have a herd m96 spreader and the pto shaft has "fallen off" where it connects to the spreader. I am going to contact herd monday. Does anyone know if this is a standard bolt/spring/pin that I might be able to pick up at tsc?

Any recommendations on size and price? Is there an internet site that sells them? I have a front blade and we don't get too much snow so I thought if I could pick up a rear mount for not too much I might pull the trigger on one. thanks

I have a Herd M96 spreader that I love but when I use certain things like lime pellets the spreader pulverizes the pellets and I end up spreading pellets and dust. Should I remove the agitator? Anyone done this?

Jack Pitney, vice president of marketing for BMW of North America, was killed yesterday during an accident while driving a tractor during a vacation on his farm in New York. BMW of North America President Jim O奪onnell said the company is still trying to deal with the loss of one of its brightest...

I have a pats easy hitch and I am thinking about a longer top link. Anyone get one online? How long?

I have to pass along how good the service is al Barlows. I sent Brady an email about the price of a 10" backhoe bucket one night, I said okay and when I came back from a trip 5 days later it was waiting for me. He is a complete pro. It tool all of 30 seconds to buy the bucket. Contrast this...

This was a great feature on the BX I had. Any shavings or particles would collect on the strainer and be removed from the hydro system when you cleaned it. I did not have a lot of these shavings in my BX but I had some. My new B2920 does not have the magnetic strainer...is it not needed due to...

How much of your hydro fluid do you actually change on a tractor with a loader and backhoe? I would imagine there is a lot of fluid in those implements. Given this can you really change the type of fluid (and does it matter)? with all the debate about SUDT vs UDT I would not be a bit surprised...

I rinsed it out with water after I used round up a few weeks back. What else should I do to make sure I don't wipe out my grass? Thanks

is there such a thing or should I consider having one made to hook up directly to the QA? I have a B2920 with the Kubota forks but there are only two forks on that. I could also get a unit that clips on to the bucket for occasional use.

Is there a hydro filter and a trans filter? Sorry for the multiple post but I am supposed to do this early in the am. Thanks

I know from another post it holds a lot more than 3.7 quarts of oil. Any other tips? oil and filter change, hydro filter change and adjust clutch pedal? I did not see anything about a magnet for shavings like my BX24 had. all info will be appreciated!

Just opened it and used it today. As usual with Bxpanded everything is top notch and easy. I wish I had bought this a year ago! The website doesn't show it but this model has a 3 point mount and it seems very sturdy. It seems like a very high quality unit.

If my B2920 has a 12v power jack I cant find it! There is one advantage of the BX24 over a B! I would rather not run the cable to the battery. With the sprayer on the 3pt hitch and the battery in the front that is a long cable. My tractor has a rear work light...is there any other easy way to...

So far I would not want to be without my QA buckets and forks. Yesterday I switched 4 times moving gravel, 6x6s and digging. BTW the 60" bucket is great for gravel - no problem when full. I would not want to do this without the backhoe on though. The other item I added which I love are the...

Build your Kubota lists 10" as the smallest. Are they universal and or will any smaller buckets fit? I am using 6X6s to build a small wall for flagstone patio as well as surrounding a play set and I dont know if i want all the trenches to be 12" wide.

Yesterday, 07:03 PM #11 (permalink) whitedogone Silver Member __________________ Recent quote from a Chainsaw forum I frequent..... "Look bub. This here is a collection of serious hardcore Saw queers" Might it apply here as well?

I am very limited on where it can be dumped because of an asphalt driveway. 5y will only need to go 20 feet or so and the other 10 will need to go about 200 feet. thanks

anyone know who sells em? everything attachments shows them but they are out of production.

I just put these on and it makes the tractor feel MUCH more stable. I would highly recommend them. In the pic below the spacer is installed on the left side.

this thing is a beast!

I could swear I read that most of the three point hitch could be left on while the backhoe is mounted. Is this true and what stays/what goes? I dont see any way to keep from taking the whole thing off each time. Also I miss my BXpanded backhoe dolly. The BH65 takes up some space with the...

I posted a month or so ago that I only had homeowners ins. This time around I got the Kubota insurance. It seems that the coverage requirements have increased (it now states transport, flood and off property) and I no longer own the tow vehicle or trailer I used to have. This way if I use my...

I called them and spoke to David Herd. He was extremely helpful and knowledgeable. They are sending it to me via ups. Excellent service!

I posted a while back that according to the specs there is not a big difference in capacities (loader etc) between the two. After using it for a full day the difference seems pretty big. Here are some early impressions My general impression is obvious - just that this is a much bigger tractor...

These guys did a great job. Brady was extremely professional and knowledgeable. He must have a blackberry or something because it was not real unusual for him to send me an email response at 9pm or on a Sunday. That is real unusual in the world of tractor sales though - some of the requests I...

I did not have time to use it because today is my daughters birthday. i will post some more pics later. I got a QA with forks, 50" bucket with toothbar, 60" bucket, backhoe with thumb and front hydro blade.

I recently made a deal with barlows and while waiting listed my BX24 on clist online. I sold it to really nice guy who paid with a cashiers check but I did have to answer many stupid question and offers from other people. What was really interesting about the whole thing was that prior to a...

I need something to hold me over for a week until my mine shows up. Have any pics of your machine that you haven't posted? There aren't a whole lot of them on this site.

Made a deal with Barlows - great experience! I am getting a B2920 TLB unloaded turfs, loaded ags, thumb, front hydro blade and hitch, wheel spacers, rear light, QA, forks, 50" & 60" buckets with welded hooks, 16" BH bucket and a BX42 chipper. I really like the BX24 and was always amazed at...

Have you ever dealt with someone that was such a complete pro five minutes in you knew this is where you wanted to spend your money? I just wrapped up a deal with Brady Barlow and I cant say enough great things about the whole experience. His service was great. Countless emails, phone calls and...

and is manual rotation okay? It seems like the fronts run about 1000 more. I have run the search and I am looking for more info as it applies to a new B series

I am seriously considering a B2620. Has anyone heard anything about the BH65 being redesigned? It might only be a curved boom or it might be more but it seems like all the BHoes that have come out in the last few years look different.

I will have loaded rears. Uses incl loader work, working in the woods and clearing land with a box blade. Maybe some snow work if I choose ags. I like the idea of ags because R4s are supposed to be horrible with a little mud on them. Are ags as tough as R4s? Advantages or disadvantages? My...

What prices has everyone gotten on a BX42? Just checking. The service at Woodward crossing has been so good I will be hard pressed not to buy one from them. Very impressive, knowledgeable and great follow up. I would highly recommend them. Also anyfeedback on a BX24 or B2620/2920 while using one?

I saw a 500lb capacity spreader at TSC and I was shocked at how big it is. I have read real good things about the Herd M96. Any others? I am going to use it for lime (probably pelletized), fertilizer and seed. In a rare situation salt.

same as silicone spray but you are probably more likely to have it.

I am really considering this. Both TLB with unloaded turfs. I love the looks of the B and the increased ground clearance. Here is what I use a tractor for on my 6 acres: 1. on grass for aeration, fert and lime. leaf removal after I get a vac. it seems like the 2 tractors weigh virtually the...

I am shocked at what this thing did with the rear chains on it. Almost 3 feet of snow and it was unstoppable. I angled the blade and kept it about 10 inches above the surface. I could plow in reverse for a pretty long stretch and then go back and lower then blade. This was MUCH more effective...

I bought this at TSC right before the big storm hit for my BX24 with Turfs and rear chains. It is the normal yellow one not the orange XB. For $300 it did great. I really wanted a Woods RB60 but couldn't find one. I have heard so much bad about these things I kind of looked at it as being...

I am definitely getting turfs unloaded for my lawn but I would also like a second set to have the rears loaded for better traction with the box blade and better traction on dirt or a little mud. Anyone have pics of the turf/bar combo set? any thoughts on R4s vs ags?

Thanks to reading all the posts here over the last couple of years I am realizing that I want a bigger tractor. I don't really know why except for tractors are kind of like TVs - why not have a bigger one? Anything new coming out on the B series? Would be a TLB no MMM- what other options...

I am hoping I can buy these through the whole goods program. Is the only fit problem with the mower? it is an 08 if it matters. Thanks

I had a blast clearing my driveway after the big 20" snowfall in northern virginia. I used my BX24 with rear box blade and my Polaris 800 atv with plow. When one of them would get stuck I would use the other to get it out or use the winch on the atv. I was really feeling proud of the tools I...

Everything about the product and dealing with Richard was absolutely first rate. I am very impressed with the design of the skid plates from the trap door and holes for fluid drainage on the rear plate to the hinge for the front plate. I would recommend both skid plates to anyone with trees or...

(This is also in the Kubota section so apologies if you see both) I talked to Dan? Herd who was extremely helpful. I really want to buy a spreader from them but he mentioned that on a BX that the PTO shaft might have to be so short that the 3pt hitch will be limited (if I raise and lower it it...

I talked to Dan? Herd who was extremely helpful. I really want to buy a spreader from them but he mentioned that on a BX that the PTO shaft might have to be so short that the 3pt hitch will be limited (if I raise and lower it it can destroy the spreader). Anyone use these or other spreaders on...

Apparently Mine does not reverse unless I unbolt the blade from the 3 pt due to some metal reflectors on the ends of the blade. (woods LRC60) At first i was bothered by this but now that I think about it I don't know how often I would use this. What about everyone else?

Mine has metal "reflectors" on the top at both sides. They have a red sticker on them. because of this I cant figure out a way to reverse the tines...it does not swing around because the big metal things hit the bottom of the 3 pt. what is up with this?

Thinking about a herd m-96 or KK xb...will it do salt, sand, seed and fertilizer? How wide or narrow will it spread? I have about 1.5 acres of grass and I would also like to do lime but I can use pelletized if needed. Fertilizer, lime and maybe driveway salt would be the normal uses and if I...

I dont need something too heavy duty. i am clearing about half an acre for grass and I will probably not use these too much when I am done. I will also probably skip wheels for the rake for now. My dealer caries woods. any recommendations? I have searched all the forums. Also any decent new...

I am seriously considering going from our 6 acre place to one on 20 -30. I am assuming that hay is a very time consuming deal which requires expensive equipment etc. I also work ful time so I only have a couple of days a week to atrtend to the land. So the question is how do you take care of...

Cut in half, glue etc. I am going to do this today. ANyone beside SEODave do this? Maybe famous last words but doesn't look too tough.

I was very proud of myself for changing the fan belt in my backyard then 1/2 hour later a branch took out all my HST fan blades. The funny thing is I was holding off on the skid plates for no good reason. Anyone have any luck cutting the replacement fan in half them gluing it together?

I did not notice the gauge. Saw a little smoke and the temp needle was in the red. I shut the motor off...what else should I do? The reservoir cap was open and it looks like most of the coolant is gone. Should I put some in and run the motor or should I let it cool down first?

Here are some pics of my back yard. After I move all the wood and branches out I have about 30 2ft+ stumps to remove then topsoil and seed in the fall. I am also going to rent a chipper to get rid of all the crap 4" and under on my property. I removed about 50 trees then paid someone to do the...

right now I have turfs on my BX and they are worthless once they are covered by mud. Would chains over the turfs be better than R4s? or are they all a waste of time until it is dry outside?

in other words body facing forward as usual but turned around? I did so I could dig a long drainage ditch. It worked pretty good. I dropped the stabilizers and kept the seatbelt on but when I was ready to move I just raised the pads and hit the gas. I would have gone crazy getting off and on.

I have a BX 24 and I want a thumb to hold tree sections while I cut them into smaller sections.

I have turfs now that are not loaded for my grass. Would it make sense to get R4s that are filled for better traction on mud or dirt? I think if I do this I might only get rears. Thoughts?

Thinking about a used one for leaves. I have a ZTR so this will be occasional use only. What models fit/don't fit? Would the fine cut or normal be better once hooked to a Cyclone etc?

would this be okay? I couldn't find a picture but 4 or 5 5 gallons tanks could fit in this container. I am anxious to get my fuels out of my garage. I am a little worried about the heat in summer but it has got to be better than the garage. FWI I have plastic ventless cans and I could replace...

I never really understood what all the complaining was about until I came to a fast stop in reverse while quickly backing down a hill with a 3pt aerator on the tractor. Even with the front loader on it lifted the front end off he ground and got my attention. After that the problem has popped up...

what do you use them for? I am trying to come up with some good projects for when the weather is good!

Which one would be better? My driveway is about 10 feet wide so I would like something that can spread narrow spaces. Would salt damage a $500 PTO spreader? If so I can buy a cheap one for my atv and spend the big money later. I have a BX24 BTW

which one would be better? I already have the atv with blade so the question is should I buy a rear blade for my BX24? Does anyone make a front blade for this without the $1800 kwikhitch setup from Kubota? We do not get a whole lot of snow here (Northern Virginia). $ wise the only thing that...

Anyone make or have one? I would like to buy both and they seem like the same thing. I would think the same attachment would hold both. Or am I just cheap?

I did not have to actually remove them this time but almost. What tool do you guys use to remove the front brush guard? I have a ton of tools but nothing to fit the front of the bolts. If anyone knows what size allen wrench or whatever this is let me know. It would be nice to have this handy...

ANy ideas before I tear it apart? I was pushing/lifting huge brush piles with my BX when I noticed my tach was not working. I a pretty sure the ignition switch did not work as well. I kept working and was wondering how to shut it off...it died about 45 minutes after I noticed the problem. My...

the loader moves up and down but it will only curl about one inch. Hydro fluid is full and all other functions work fine. Any ideas?

I have searched the forums but need some help. Is a 3PT hitch or tow behind better? I would prefer a 3PT unless the tow models have some advantage I haven't thought about. I would like a good unit but I don't want to spend over 1000 for a unit I will use twice a year. Any recommendations for a...

I had a stick destroy the rubber boot (looks just like a CV boot) in front of the hydro fan. Do I need to get this fixed? The fan appears to be fine and working properly. When the boot broke it slid forward and put a small hole in the floor mat. I cant tell if the gap in the plastic was there...

Any recommendations? I have done several searches and now i am more confused. Thanks

to create a lawn? I am taking down about 80 trees and I need to rip out the remaining roots and I will have to spread alot of top soil and grade the yard. i may need to get some fill dirt to bring up the level of the yard as well (I have a BX24 and a Polaris 800 ATV) Thanks

BX24 - 8" or 12" BH bucket? I will primarily dig up stumps 3 to 12" in diameter and do some general digging to plant trees and bushes etc. Who has which bucket and why?

I ended up buying my ATV on the phone from far away because the local Polaris dealers here are pretty weak. How about Kubotas - any good dealers around?

How much should I pay for the standard model with turf tires? What items should I consider having the dealer add before I get it (too hard for the average person that can't weld to install later) and what should they cost? I am interested in a tooth bar or thumb and maybe hooks or teeth for the...

I have pretty much decided on the BX. There does not appear to be a huge difference in loader or backhoe specs and i am not opposed to renting a bigger unit for the occasional bigger task. To be honest I am going to mostly goof around with this in my yard and woods. I do have several small...

Which ones should I consider? I will probably not cut any grass with this but I will use it on my grass for many other things. I have many small stumps to dig up and alot of fallen trees to move around (after they are cut into 5' peices). Is there anything else in the same price range? Ease of...