Search results

My Ford 2110 front wheel bearings (2 wh dr) imploded today, having a hard time finding these on line, I need the everything, bearings, seals, any help will be appropriated

I have a Jd790 4wh dr, my question is do both front tires pull in 4 wh dr or does one or the other pull, thanks for any info

new to me Kubota L2550, the charge light is on,,that way when I bought it,,i got a meter that supposed to check the battery and alt,,( they were sold out of multi meters), the battery is new and the meter sez its good,,no lights of any kind on the alt check,,I got a new alt off line =, the...

Got a 231 with the rear brakes sticking, anybody know how to remove the rear brake drum,,thanks in advance

Just bought a Massey Ferguson 230, doing some cleaning and maint, took the air filter apart and the bottom is full of milky oil and 2" of muck and grass and whatever,,got all this washed up and cleaned up,, do I need to take the rest of it apart,,or take the top hose off and run some cleaner...

Just bought a MF231, seems like a good tractor,,has 741 hrs on a working meter,,the only issue I can find is the pto grinds when trying to engage, may need the clutch adj,,can anyone tell me how to do this,,thanks in advance

This a new to me 3325,,it has been setting for a while,,started messing with it this morning and when it did crank it is running away, big time,,controls will not affect rpm's,,any ideas or suggestions appreciated,, when I first got i, it t wouldnt rev at all but found that I had not voltage to...

I just bought this 3325,,its been sitting a couple years, prev owner passed and family decided to sell,,heres my issues,,it will not accelerate,,it just idles,,the accelertor is working but nothing happens, im suspect the injector pump,,i had an older kubota that did this after setting and it...

what typer hydraulic fluid do you use in NH tz22da,,mines a little low and need to add some

Im looking at a 2000 TC29d that a man has for sale,,the pto is not working,,he said his son hit a tree root while using a tiller and broke something in the tractor,,the price is reasonable, was just looking at a parts breakdown and they are quite expensive,,just wondering if anyone has had this...

M buddy has 3032E, the rear lift is not working crrectly,,it is either all the way up or all the way down,,any ideas what the problem might be or what can we check,,thanks advance

Im about to put my 2003 Mahindra 3510 on the market, , 4x4, aftermarket loader, ag tires 2 years old, 1264 hrs, everything works as it should except the fuel gauge,,tractor looks and operates very good, shed kept,, what would be a good price range to ask,,any info appreciated,,looked on the...

I have a L3400, 2008 model 4wd,,my question is will a la525 loader bolt onto this tractor,,the proper loader is a la463 but I have not been able to find one of these,,the 525 is designed for L2501 thru 3901 tractor,,the ounting brackets look the same,,any info will be appreciated

Me and a buddy are looking at a Dk55,,runs good, wont go forward,,will go in reverse,,any ideas what it might be or what to check,,thanks

Just bought a new to me JD790 with a 300 loader,,its a really nice tractor,,think Im gonna like,,just a question on the loader,,all works grat and love the it removes,,it just seems like it loose where it sets on the main loader bracket,,that may be the way its supposed to be

Just bought this 790,,decided I would change the fuel filter,,went to auto parts store and got a paper filter cartridge, when i removed the old filter it is completely different,,it has a plastic filter with a round screen,,has a stem that goes down to the bottom of the bowl,,it is working as...

Just bought a JD 750,,tractor actually runs pretty good,,has a little puffs of blue smoke when first cranked but clears up,,but it has blow by out of the crank case vent tube big time,,not smoking,,just blow by and some oil coming out,,oil looks really thick goopy,,any ideas what would cause...

New to me GX 3025, 2016, 65 hrs,,just bought it today,,everything seems ok to me,,,my only concern is it seems like the pto us not running quietly,,never had an LS before,,may be normal,,also the pto shaft does not turn when it is turned offr,,this may also be normal,,the owner could not find...

Going to look at a 25 hp LS in the morning, 4wd, loader, looks good in the pics, very low hrs and priced I think low,,I know nothing about an LS are the owners on here pleased with theirs,,any info will be greatly appreciated,,anything I need to look for specifically

trying to install a new iniversal type seat on my 3910,,,took the old seat offf, the front bolt is not a problem, removed the rear nut,,it is pretty much rusted to a for better words a stem,,about 3' long that goes into the top cover,,put the new seat on,,front bolt no problem but the rear bolt...

new to me 3910, power steering not working when i got it, the lines from the steering sector to the cylinders just been changed,,will the lines have to be bled ??, i looked in the filler cap on the pump while it was running and there was fluid flowing thru the pump, any suggestions

drug in an ugly 3910 today,,you talk about one needing some love, pulled it off at sellers place and it actually runs and operates pretty good,,spent all evening pressure washing years of grime and grease off of it,,,man I got it from sez it got to where the starter wouldnt work,,power steering...

Just got this 3415,,tractor runs and operates great,,seller sez he had trbl starting and was pulling it off when I went to look at it,,i carried a battery and jumper cables and it fired right,,when i got it home I noticed the glow plug indicator was not warmig up,,pulled it and sure enuff the...

Im looking at a TC25,,just looking for opinions good or bad, ,,looks to be in good cond, 1300 hrs,,runs good,,will it pull a 5' rotary cutter and disc

Looking at 2008 CK35, the owner has passed away and the family is trying to sell it,,really nice tractor with 384 hrs,,shed kept, shuttle shift, 4wd, just the tractor, no loader,,what would be a good price for this tractor,,it looks really good and has been gently used,,thanks in advance

ive got a power steering assist cylinder leaking on my 2810,,I have everything loose but cannot get the ends out,,i have the nuts off the back, i tried tapping on the nut on the front one but no help,,didnt hit very hard,,,any help appreciated

Just bought a 2810 II, 2wd, Bushhog loader, tractor looks to be in good cond with 1536 hrs,,needs a little maint., one of the power steering cylinders has a slight leak, muffler has a light leak , i can fix that with my wire welder and the injector pump has a slight leak, tractor cranks and...

My DK 35 is not wanting to turn over,,its been getting slower,,I went and bought new battery 2 days ago and it cranked right up,,tried to crank it today and it would hardly turned over,,had to keep bumping the sw,,finally got it to crank,,the battery should still be hot as I disc the pos. side...

LK3054 hydraulics quitting,,I was pulling my finish mower today and after about 3 hrs the hydraulics quit, Fel, power steering and lift all quit,,turned it off and got off to check for leaks or any thing obvious,,nothing, cranked it back up and worked for a few minutes and could tell it was...

I need to replace the 3 point lift arms on my Kioti LK3054, anybody know the length,,there are several after market ones avail,,thanks in advance

Im tying to put a new joystick control valve on my Kioti LK3054,,the old one had 3 ports ,, in, t p,,it had a broke piece on the joystick, it worked but not very good,,put the new one on and it want do anything, im getting fluid running thru the unit from the pb port,,do I need this port...

Im looking at a Mahindra C35,,,I have loader that came off of a 3505,,looks like the brackets will fit the C35,,just wondering where the hydraulics connect on the C35,,never owned a Mahindra, is the C35 a good machine,,any help appreciated

Im needing to replace the front end loader control valve on Lk3045,,its a Great Bend loader,,has 3 lines going into it,,any suggestions,,Im kinda confused looking at whats on line

Help,,,I am trying to remove the bevel gear case off the front axle on Lk3054,,I've got every thing off of it,,just looking a the parts diagram and looks like a snap ring holds the gear on the axle and I am assumimg this has to be removed,,any help appreciated,,if the snap ring has to be reomved...

Just got this ford 1715,,am having a problem with the pto engaging, the pto will engage but is not staying engaged,, the lever feels sloppy,,I feel like it is going to be a problem with the shift fork or detente ball assoc with it,,there is a plate on the bottom of the transmission close to...

I am needing to replace the Joystick on my LK3054,,it has a Great Bend loader on it,,it has 3 hoses going to it,,2 feeds and 1 return I am assuming, I have no idea what to get,,any help appreciated

Need to replace the control vlave on Kioti LK3054,,I has a Great bend loader on it, has 3 hoses going to it,,2 feeds and 1 return I am assuming,,have no idea what get,,any help appreciated

MY neighbor has a JD2150,,it has started leaking oil out the top of the steering column,,I have been told there is a seal at the top of column, any help appreciated

My front end loader bucket is giving me problems, the loader bucket is rolling down slowly own its own,,i can bump the lever and it will pop right back up, the loader lift arms hold up and do not leak down..trying to figure out where to start , are the cylinders on the bucket leaking internaly...

Im looking at a Kubota L4200, tractor has 896 hrs,,appears to be in good shape, the tractor can be shifted without depressing the clutch pedal,the qusetion I have is when you push the clutch all the way in and put the tractor in rev or forward it wants to start moving before the clutch is let...

A friend of mine has a 1995 L5450, 1247 hrs,,runs very good, this tractor started having blowby and eventually starts dripping oil out of the crankcase vent hose,,this started almost immediatley hes had it several years and this just started happening, I think its a broke ring but im not a...

New to me DK35,,got on it yesterday and all the dash indicator lights started flashing,,at idle they are just on but when I start using it and increase the rpm's they start flashing,,just a steady flashing,,every thing is working ok,,all the lights flash except the oil pressure light and it is...

Just acquired a DK35,,its a nice tractor, 4wd, loader, 604 hrs,,never have owned a Kioti,,seller did not have the owners manual,,there is a small lever under the 3 point lift handle, it is marked A and B position,,what does this control,,thanks in advance

Just acquired a Kubota L4310 Hst, the problem i am having is the transmission will not shift into low range,,works great in high range,,when shifting into low I can feel it go in but it will not stay,,I can hold pressure on the shift lever and it will pull but I can feel it trying to jump...

Found a Ford 770b loader to put on my 1910,,the hydraulic connections on the block that I took the loader off of are parallel along the top of the block, the block on my tractor, one is along the top and the other down a little toward the center,,anybody know which one is the feed and which one...

Got a new to me NH TC30,,ive got a very slight fuel leak where the lines come out of the injector pump,,,leaking out from under the flat plate that holds the conector down,,was gonna try and tighten it but the the nut is a 5 sided pentagon shaped nut,,,went to a couple parts houses lookng for a...

I bought this tractor last week and i am having some issues with cranking,,it will not turn over,,been cranking since I bought but got on it this morning and it want done nothing,,i was running it yesterday, put it under the carport and this morning nothing,,yesterday when I first cranked it ...

Looking at a Kubota L2600,,the 3 point lift wont go down,, it will come right up but owner sez lift will eventually go down and after a few days,,any suggestions,, he has a good price on it and everything else works good, it may be a grey market or an older L2600,,

Just bought Ford 1715,,4wd,,the tires a very worn,,it has 9.50-24 rears and 6-14 fronts,,i have access to a set of 11.2x24 rears,,,just wondering if this will mess up the 4 wh dr,,looked at tractor data and it sez the recommended tire for this tractor is 11.2x24 rears and 5.50x16 for the...

I have a NH1725 that I am going to put a Koyker 140 loader on,,the Koyker loader has 2 hydraulic hoses,,on the break out block which 2 port am I going to use,,it has 3 ports,,one at the top, in the center and another at the bottom,,any help appreciated,,

I just acquired a JD4300 project (basket case), supposedly running when prev owner passed 5yrs ago, been setting out side,,i want to see if this boy is gonna run before I get to deep in it,,the wires going into the fuel solenoid are cut,,left about 6",,why I dont know, I dont see the other...

Looking at buying a MF1030 form a man up the road,,good looking and running tractor,,problem is it will not go into third gear,,in high or low,,all others work good, its just like there is nothing there,,u feel nothing,,no bind, no grind, nothing,,just wondering if anyone else has had this...

Just bought a New Holland Tc29D,,tractor has been setting for a while,,got it running and and it runs fairly well,,has a loader and all that works good,,the problem im having is the steering is stiff,,it steers ok but its like the power steering is not working,,I disc the power steering...

I changed the hydraulic fluid in my Yanmar YM2000 and the lift quit working,,was working before I changed it,,is there anything I have to do like blled lines,,,,any help appreciated,, fluid is 303 from local farm store

Just bought 2005 Kubota B2410, super little machine,,I have a question about the mower deck, in the up position the front wheels are not clearing the ground,,is this the way its supposed to be, looked under and the stops on the rear of the deck are all the way up against the stops,,any info...

Im looking at buying a Kubota L3010 4wd,,I have a Koyker loader that will fit on this,,what I need to know is the L3010 plumbed for a loader or will I have to add the control block,,any help greatly appreciated,,I cannot look at it,,it is several hrs away

I twisted one of the blade bolts off in the spindle this evening, how do I remove the spindle to where I can get to the bolt to drill it out, i might be easier to remove the deck and flip it over

Can someone tell me the loc of the oil pressure sending unit on a NH1530,,Ive looked this engine over and cannot find it, thanks In advance

Trying to figure out how many hydrauic lines go from the manifold to the the joystick, does it us 2 lines or 3, thanks for the info

I just bought a Ford 1920, it has a Bushhog brand 2400QT loader, the problem I am having is the front loader and the 3 point lift will not work at the same time, the man got it from sez it was like that when he bought it, it has a dual handle control valve on it with one input and 1 return...

I need to replace a front end loader valve, it now has a double lever controller on it now and i want to replace it with a single joystick type, its on a New Holland 1530, Bushhog brand loader model 2440 Qt, any ideas on where and what to get will be greatly appeciated..

My BX 2200 HST has started jerking when going forward, if I ease the pedal it will sometime not do this but if I just push it down it jerks and continues to jerk during operation,,I changed the fluid and filter but it did not help, it does not do this in reverse,,any help or suggestion...

Showing my ignorance here,,need a a repair manual for a NH1530,,got a pto problem and have it bout half way out, never have tried to download a reapir manual but see these listed on th webb such as the one at the top of this page,,how does this work, thanks, a country boy in the south

Just bought a NH1530, hst, runs great and everything works as it should but the pto will not stay engaged, I can hold pressure on the lever and it wiill stay in but you can feel it trying to jump out of gear, any suggestions

Im looking at buying a Ford 1710, tractor seems to be in good cond, runs good, 4wd, has a loader, 1390 hrs, the only issue I see is the pto grinds when trying to turn it on,,, , I can turn the tractor off and put the pto in gear and it works fine, any help appreciated, the gentleman is wanting...

2005 TC30, the fuel ga and temp just quit working, what would be common to these two if any,,any help will be greatly appreciated

I just got a Mahindra E350-D1, front left spindle is seized up,,big time, I have taken the steering arm off the the top, I think it should just drive straight down, please correct me if Im wrong, this thing is so seized I had to put a 6' cheater bar on the axle just to move it back and forth...

The wife recently inherited a JD4310, 4x4, JD loader and JD backhoe attachment, we are probably going to sell it and just trying to figure out a price for it, it is in good cond, 728 hrs, hydrastat, good tires, the loader and backhoe are quick disc and we have the lift arms for the 3 pt hitch ...

New to me TC33D, 4wd, hydrastat, 1900 hrs, fel, just bought this yesterday, out working a box blade today and seems like the trans oil is getting hot, tractor is running a normal temps per the gauge, after i worked it for a while the hydraulicic fluid is coming out of the vent behind the seat...

Just bought a M/F 135, 4 cyl gas, (1964) nice tractor and runs great, the oil pressure runs a 20 psi, a buddy of mine was looking at it and said he thought that was low, my question is what should the oil pressure run

Looking at a 4300 that is for sale in my area, it has a transmission problem, it will not go forward at all, reverse works fine in all gears and all ranges, tractor looks and runs good , 4wd and loader, , he is wanting 6200 for it, don't know if this a good deal or not, any thoughts on this...

Just bought a B21 equipted with a loader and backhoe, 244.5 hours, runs and operates great, the problem is the rear wheels are not pulling, the front wheel dr is working and will pull the machine, I put the ouriggers down and picked the rear wheels off the ground and I turned one of the back...

Trying to remove the tie rod ends on a Kubota L3600, when I try and back the nut off holding tie rod end the nut and bolt are turning, am I overlooking something or is there a trick to removing the tie rod end,

I have a BushHog 1846 qt loader, I have the opportunity to buy l2350 4wd at a reasonable price, will this loader work on this tractor, it was on a Yanmar YM1500 2wd. is there any where on the net that tells what all this loader will fit.

Just purchased a Kioti tractor with a known problem, cannot control the engine rpm, cranks right up and runs great but the rpm's keep increasing and cannot briung it down with controls, also cannot stop it with the fuel cut off, the aonly way to stop is to disc the fuel supply, the fuel cut does...

Just bought a new to me Kioti 3504, it has a couple issues, first it has a pretty significant oil leak from the power steering pump, I haven't taken the dash off yet but a buddy of sez it probably is a seal and will have to rebuild the pump, has anyone had this problem and is it difficult to...

I have a Ford 1710 that I picked up a while back and have been doing a little work on, I am having some kind of fuel issue, it is hard to start but runs good once it does, have to pull accelerator all the way down to crank, it will crank and quit likes its not getting fuel and then will...

Looking at buying a Kubota L2201, what is the American model of this tractor.

Bought a Kubota L260 today equipted with a front end loader, tractor has been sitting up for a while, the hydraulics are a little slow and jerky, how many filters or screens are on the tractor and where are they located, want to change the filters and hydraulic fluid, tractor runs and operates...

Can anyone tell me where I can find info on what model tractors a LB400 tractor will fit, bought one reasonably over the week end and am going to find a tractor for it, looks like a 2350 and 2500 will fit

Just bought a MF135, never had a M/F before, finally got it running, it had not been cranked in a year a half and the tank was empty, had bird nest in the air filter, like to have never got all the air out of the lines, whoever put that tank so close to the injectors never thought they would...

I locked the differential this afternoon and now I cannot get it to release, the owners manual said tap the brakes, I've pretty much stood up on them, cannot get it to release, anybody got a trick

I was running my new to me 2110 this weekend and have put about 10 hours on it since I got it, , started getting a sulphar or rotten egg smell after running it about an hour or so this morning, never had this happen before and I have a 1910 that I have put 2,000 hrs on, is this the fuel or...

Just bought a 3650 with a Bushhog brand loader, the joy stick does not return to the neutral position when you let t go, there is a spring located on the bottom with a nut beneath, is there any type adj to correct this, thanks In advance

Can anyone tell me if a 7108 loader will work on a 1715 Ford, have the opportunity to buy one at a reasonable price.

Put the loader on my new toy yesterday, Ford 1710, just bought these and the loader was not on it, anyway, everything connected great and it works good, on the part of the loader that connects to the rear base, there is a bolt with a handle on it, what does this connect to, I don't see anything...

Bought a new toy day before yesterday and got it running yesterday, its a Ford 1710 and it runs good, I have noticed a low rpm knock or rattle anywhere below 1200 rpm, once I increase the rpm's the noise goes away, I might also mention that when I first crank it, it smokes for 2-3 mins (every...

Need a head for a JD 950, have looked all over the net with no luck, if anyone knows where one is avail i'd appreciate the lead

Just bought a Ford 1710 4 wheel drive, the rear tires are 11.2x24, the front rims are 16", prev owner put truck tires on it, did tractor come with 16's on the front, the rims are Ford rims. they just look big to me.

Pto seal leaking big time, can anyone tell me how to replace it, I have a new seal but it looks too big, I took the the 3 bolts off the retainer and that's far as I got, not sure how this comes apart,, any help will be greatly appreciated.

Does anyone know which model M/F tractors a M/F 1246 loader will fit, any info appreciated.

Just bought a Ford 3600, wiring has been altered, (butchered), can anyone tell me how many lugs are on the original ignition sw

Just bought a Case/IH 255 at an estate sale, got a heck of a deal, anyway the starter is not engaging, it will spin but not engage the flywheel, been sitting up for a couple years, any suggestions as to what to check,

New to me Case/IH 255, the starter is spinning but not engaging the flywheel, what causes to starter to engage, any help appreciated.

I was looking a some old post concerning injector pump problems, can the pumps be rebulit or do they have to be replaced,

Looking at buying a LK3054, it has some issues, needs a starter for one, it has set up for a couple years, its a 4 wheel dr with a loader, showing 851 hrs and owner sez this is correct, the owner sez the last time they had it running the rpms went up and would not come dowm, sounds like the...

If someone on this forum has a 1320-1520-or a 1720, I really need for someone to operate the switgh key to the run position and see if the fuel cutoff solenoid will operate, having prblems cranking mine and I think the sw is bad, I would really appreciate it,

New to me Ford 1520, just bought this tractor, previous owner must have had problem with ignition sw, found all this when I got it home, previous owner changed the sw out and used and 3 prong sw with a start button, he left the glow plug wires disc, that configuration worked good unless it it...

Is there a site on the net where I can pull up a wiring diagram for a Ford 1520.

Just bought a new to me Ford 1520, someone has replaced the igntion sw with a 4 post switch and installed a push button on the dash,,the glow plugs are not working making it difficult to start, if someone can tell me how to rewire this thing I would greatly appreciate it, I have five wires, (1)...

Took the loader off my 1310 and now the lift is not working, probably got air in lines, I think I should open the large return line at the pump to bleed the lines, is this correct.

I have a Ford 770A loader that I just removed from my tractor and am going to put it on the market, it is a single joy stick, I have all the brackets to mount it, the loader worked good with no problems, have no idea what would be a fair price for me to ask for this loader, any help appreciated

I'm thinking about buying a Yanmar 2610D, it has a Koyker 140 loader on it, 4 wheel dr, tractor looks and runs good, may need a brake job, the owner is wanting 5200.00 for it and is firm, I am not famaliar with Yanmars, is this a good tractor and is the price reasonable, any advice appreciated.

A buddy of mine has a Ford 1510, the tractor always smoked a little at start up and would then clear up, he called me today and said the started smoking, went over to his place today and to say its smoking is an understatement, this thing looks like an old timer mosquito fogger, I talkin this...

Just bought a Ford 1715, the tractor runs good but has a good deal of blowby, I knew this when I bought, didn't give a lot for it, I was wondering if I could just drop the pan and push the pistons out, hone the cylinders and replace the rings, not a real mech. but love to tinker, any advice or...

A fellow I work with has a B7100 hydro-stat that the transmission has quit, all the other hydraulics work, I would think that would rulw out the pump, any suggestions as to what to check.

Just changed the oil in a new to me B6100, went to tractor data and it said 4.1 qts, chahged the filter and poured in a gallon, checked the oil level and it is way above full, is this the proper amount for this tractor.

I have a RTV 900 sxs that needs the radiator repaired, I have a leak around one of the upper radiator supports, it actually is broken all the way around, I have it out and was thinking about going to Harbor Freight and getting one of their plastic welders, anybody ever used one of these...

I have a John Deere 4310 that i am going to put on the market, it has a 430 loader, shuttle shift trans, just a real nice tractor with 1360 hours on it, 4 wheel dr, epowereverser, tractor looks and operates great, no known issues, I am thinking about asking 14,000 for it, is that a fair price...

My neighbor called me over to look at his Kubota this morning, looks like fuel and oil running out of crankcase ventilator tube, I pulled the dipstick and fuel and oil just came gushing out, the tractor is running fine, not smoking, ran for just a short distance before he noticed the overflow...

This a tractor that I bought a little while back just to mess around with been setting in a barn for a while, I had the injector pump rebuilt, it had one stuck plunger,, will crank right up now but I am getting white smoke out of the exhaust, would a clogged injector cause this

New to me John Deere 4310, 2004, 4x4, powereverser, shuttle shift, have had this tractor a week or so and finally got to some seriuos work with it, was leveling out some washed out places an the side of a hill and every so often it would just quit pulling, I don't think the clutch was slipping...

Is there anywhere on the net where you can and go and look at digrams of Fords, the reason I am asking this i have Ford 1920 that has problem in the lift and its internal, I replaced the O ring on the lift piston but I am having trouble with the linkage that is internal, need to look at diagram...

Just bought a Ym2000, it's been setting up for several years, the owner said he thought it had not been cranked in 3 years, was running, he just quit using it, it will turn over, I drained the fuel tank and replaced with fresh fuel, still did not crank, cracked the lines at the injectors and no...

The clutch on my 96 Ford 1920 is stuck big time, been a couple weeks since I used it, I have read some of the old threads and tried driving it in figue 8's, I tried bumping it into a tree in low gear, low range, drug in down the driveway in low gear, sprayed a can of wd-40 on it, I have the...

Pressured washed my new to me 4310 this afternoon and it didn't like it, the shuttle shift will not work, tractor will not move, I know something is wet or a wire knocked loose, wheres a good place to start, I am going to let it set in the shop overnight and hope it dries out, there is a rod on...

Bought myself a new toy this afternoon, 2002 Deere 4310, 4 wheel dr, Deere loader, 1350 hours, tractor is in good cond except for the hood and it is going to have to be replaced, I gave $7750.00 for it which I think is a good price.

I need the hood side panels for a Kubota L2850, are there any other models that use the same side panel, gonna start calling the salvage yards Friday.

Just had to brag on my new toy I bought this afternoon, went by an estate sale to check on a L2600 I had seen advertised and it is absolutely clean, garage stored, never spent the night outside, 132.9 hours, not a scuff or a scratch, power steering shuttle shift, 5' bush hog, 5' disc and 5'...

New to me Ford 1920 lift problems, when the lift is at any position it oscilates, it will go up to that point and drop back, go back up and drop back, about a quarter of the the way, doesn't matter if all the way up or half way up, check the fluid and changed the filter, no help, are the pumps...

Just bought a Ford 1920 and need to change all the filters, does anyone have cross reference numbers, I checked the outer air filter and it had so much dirt in it its a wonder the machine was running and the inner filter was missing completely, this kind of concerns me, any help appreciated.

A gentleman down the road is wanting to sell me his Jinma 284, I know nothing about these tractors, it looks and runs good, has less than a hundred hours, it is a 4 wheel dr, power steering, the only problem I see with the tractor is the clutch may need replacing, it does not engage until the...

Looking at buying a Ford 1920, it is blowing black smoke out of the exhaust and the valve cover tube, the owner said it started all at once and also experienced a loss in power, he has it priced cheap, any ideas as what to llok for, sounds like a fuel problem, can't decide whether to jump into...

Just bought a Kubota l2350, I think, that what is on the side panels, when I got it home and was cleaning it up I noticed it said L2250 on the back of the front axle (it;s a 4 wheel drive), reckon I have a 2250 with 2350 side panels or 2350 with 2250 front axle, the serial # is unreadable,

I'm goimg to look at JD 4400 tomorrow, has JD loader, shuttle shift, 723 hrs, runs good, ag tires, 4 wheel drive, looks to be in good cond., the hood needs replacing, he dropped somethimg out of the bucket on it, 8500.00 and he is firm, is this a good price on tractor, any advice appreciated,

Had to get the power steering cylinder rebuilt on my 1720, what type power steering fluid does this tractor take, the reservoir has a sticker that sez " power steering fluid" but on top of the canister is sez "oil", I know some tractors just use hydraulic oil, any help appreciated.

I am repainting my Ford 1720 tractor and 770a loader, I am having trbl locating decals for the loader, any info on acquiring the decals will be appreciated.

Does anyone know where I can get after market brakes shoes for a Ford 1720 tractor.

New to me 2002 TC35D, tractor had several issues when I got but have pretty much cleared all except my cruise control is not working, it has hydrostatic trans, I checked for voltage at the switch on the fender with the key on and there is no voltage at this point, have no idea how this works or...

New to me TC35d, need to remove and replace the lift arms, got one side off after a lot of prying, the other side will not budge, have soaked with oil a couple days and no luck, anybody have this before, I just bought this tractor and it needs more little stuff done to it than any machine I have...

Did some horse trading today and wound up with Yanmar 180, runs great needs a little tlc, nothing major, but I was looking at the rear wheels and they seem loose on the axle, looks like a bolt runs thru hub and axle and it has 2 bolts that run thru springs, may just needs to be tightened, think...

Looking at a John Deere 4200, machine looks to be in very good cond. with 660 hours, 4 wheel dr, seller is wanting 5700.00. s this a good price, any advice appreciated.

New to me 850, 1979, brakes were not working at all, pulled brake cover and it is full of oil and grease, I ordered new seals from the JD store, my problem is I am having trouble getting the brake drum to come off, I naturally took the outside nut off, is there anything else that holds the drum...

I am wanting to repaint my John Deere 850 and have looked the internet over and cannot find the hood decals, any leads will be appreciated,

Anybody know where I can the grill and hood side panels for Kubota b8200. does any other model interchange with this, any help appreciated

New to me Kubota L4150 that is slow to start, 2590 hrs, doesnt smoke, runs great, it is slow to start on initial crank up, I warm up the glow plugs for approx 30 secs but takes 3 or 4 attempts to get it started, checked the glow plugs and I think they are ok, has a hot battery in it, the fuel...

New to me L4150, how do you determine oil level in 4 wheel dr front end, this is one I just purchased and am tryinh to check everything before I use it, I see there is a filler hole on top of the axle, how do you determine what level the oil should be at, I have a manual ordered but it has not...

Just bought this Kubota L4150 4 wheek drive with loader, the tractor does not pull good in the high range in the higher gears, the low range and lower gears work fine, pulled up to a bank and it will spin all the wheels with no problem, but will not pull good in the upper gears, this tractor has...

Looking for some tines for a tiller, the tiller looks like the type that imported with the grey mkt tractors, its 4', has the metal wheels on back for depth control. it works exc but several of the tines are missing, any help inpointing me in a direction will be greatky appreciated.

i am looking for some tines for a 4' pto tiller, do not know the brand but have seen them for sale before, I think it is the type that came in with the grey mkt tractors as i bought it with a KUBOTA l1500, it has solid metal wheels om back for depth control, it runs smooth as silk but is...

I am going to put my Yanmar 1702 on the market, tractor is in exc cond other than than the paint is little faded on the hood and top of the fenders, cranks and runs exc, it has no issues at all, what would be a fair price for this tractor., any advice appreciated.

I am thinking about buying a Yanmar 1600, I have never owned a Yanmar, this is from an individual and tractor looks and runs good, looks like Hoye tractor has parts for this, any info or advice would be greatly appreciated, what is an average price on this,

A buddy and I have been looking for a tractor from him, we have looked at several and noticed that some smoke (blue smoke)when you first crank them but quit after they run for a while, what causes this, I have a Ford 1910 that I bought new and it has never smiked when cranked.

Looking at buying a Ford 3000 2wd, front end loader, the loader hydraulics have a problem, owner sez loader started working slower and slower and now will barely lift, the 3 point hitch hydraulics work good, does the front loader work off the same hydraulic pump as the 3 point lift, the tractor...

Looking at buying a Yanmar 2310 from a local individual, he has had the tractor for several years, it cranks right, runs and looks pretty good, I kniow nothing about Yanmars, it is a 3 cyl diesel, he wants 3k for the tractor, a tuffline disc and howse bush hog, is this a good tractor and is this...

I have a buddy who has a 8n with hydraulic problems, lift was working ok, hydraulic fluid was milky so he decided to change it, after changing it will not work at all, he replaced it with universal hydraulic fluid, what type fluid should be used, does it have to be primed, any info will be...

New to me Ford 1510, I have a question about the water temp indicator light, with the key in the on position is the temp. light supposed to be on, the batt and oil lights come on but not the temp light, I can take the lead off the sending unit and ground it and the light comes on, does this mean...

I have a buddy who has a Kubota B7100, 4wd, fel, runs great but the hydraulics are in slooow motion, what are some of the things we can check, thanks for any help.

I have a buddy who has a Kubota B7100, 4wd, front end loader, the tractor is in good cond., runs great but the hydraulics are sloooow motion, what would cause this, what can we check, thanks for any help or advice

Posting for a buddy, he has a KUBOTA L1802, the three point lift started getting slower, so he changed the hydraulic filter and now it wont work at all, does the line have to be bled after it has been opened and if so how and where is this done, thanks for any info

Looking at buying a John Deere 850, owner sez tractor has not been used in a while and the clutch is stuck, the owner sez it cranks and runs good, is there anyway to "unstick" clutch or does tractor have to be broken down, any help appreciated, going to look at it tomorrow.

I have a Kubota L2950 that has the air sensor light staying on all the time, changed the air filter and it is still on, how do you check the sensor or should I just replace it, I looked at the sensor and it has one wire coming off it and another piece that looks like a vent or ??, any help...

New to me 1991 Kubota L2950 4 wheel drive, I just purchased a 1991 L2950 and hope someone can help me with a couple issues, first are the indicator lights, all 3 come on when the ignition is turned on, after the engine cranks the water and voltage light stay on, looked for the sending unit for...

Can anyone tell me what type power steering fluid goes in a Ford 1720 tractor,

New me to Ford 1720 ford, the RH steering arm and spindle splines have been used loose and it is extremely sloppy, front tire has a lot of play, any trick to tightning these up or do I need to replace, any place where these parts can be obtained economically.

I have a Ford 3400 taht has quit running, used it half a day yesterday, cranked it this morning and it ran about 10 seconds and it quit, will not start back up, I changed the fuel filter day before yesterday but have ran it about 4 hrs since then, I opened the fuel line going into the injector...

I need to have a steering box rebuilt for a Ford 2810, wheres a good place to have this done and any ballpark figure of how much this will cost.

Trble starting my Ford 3400, if think it is the ignition switch, I could turn it off aand on and eventtually it would start, it finally quit doing that, no clicking no nothin, trying to get the sw out to replace, stuck, can anyone tell me how to remove this switch, tried reaching under neath but...

Just bought a Ford industrial tractor and need help with identification, stickers have been pulled off hood, under the hood it has id plate that sez it is a model CU312K, called local Ford dealer and they could not ID from that number, I think they just didn't want to take the time to help me...

New to me John deere 750, just checking things over and my oil light is not coming on, got to checking and someone had the oil light connected to the temp sender, I grounded my extra wire and the water temp light came on, grounded the other wire and my oil light came on, between me and these...

Just purchased today, a John Deere 750, haven't had time to get an owners manual, my question is, when you turn the ignition switch on are all 3 warning lights supposed to come on, the oil and amp light come on but not the temp, I think i got a good deal on the tractor, cranks and runs exc, has...

Can anyone tell me where and what controls the rate of fall for the 3 point lift arms on a Kubota B8200, lift works great but lift rate of fall is very slow, new to me B8200.

I have a new to me 1986 b8200, the left brake lever that operates the shoes is pretty much seized, I can take a hammer and move the lever a little, don't want to keep banging on it, I have some PB Blaster soaking on it overnight, does anybody know any tricks to loosen this lever, the tractor...

Looking at a 1992 Kioti 2554, 4wd, FEL, gear trans, 1038 hrs, I have no experience with this brand tractor, I have not looked at it yet other than pictures, the owner wants 6k, is this a good price, what do I need to look for when I go to look, will this tractor handle 5' eq., any suggestions...

Just bought a Ford 1210 with hydrostat trans., tractor is in good cond but have a question on the pulling power, out playing with it and it seems the tractor in high gear does not have a lot of pulling power, I was running it up the back of my dam and it will not climb the grade, shift it down...

New to me Ford 1210, I want to change the hydraulic filter and fluid, does it have a hydraulic filter or just a washable screen filter or both, it has a hydrostatic trans, seem a little slow in high range, don't know the maint. history, any help appreciated.

Looking at a Yanmar 1600, tractor cranks and runs good, has a little smoke when first cranked and then pretty much disappears after running for a while, know nothing about a Yanmar, what horsepower is this tractor, are parts available, I can probably buy this tractor for 1200.00 to 1300.00, is...

Looking at buying a Hino N239, 4 wheel, Bulldog FEL, I nothing about these tractors, it cranks and runs good, loader works good, everything works good but the 3 point lift and it does not work at all, the owner sez it had a computer that controlled the lift and he removed all this, I do not know...

Does anyone know if a Bulldog 285 loader will fit on my Ford 1910, any help appreciated.

Trying to find a price on Bulldog 285 loader, looked on several sites and they don't list the price, I am looking at a like new previous owned one and trying to determine if I am getting a deal. any help appreciated.

I am looking at buying a Mitsubishi D1800, I have no experience with a Mitsubishi tractor and would like some advice/info on this tractor, I am told this is a "grey mkt" tractor, it is a 2wd with a front end loader, it looks to be in very good cond, cranks and runs good, been garaged kept so...

I have a 1980 Ford 1900 with a Ford FEL, the problem I am having is with the loader, when there is an attachment on the back that is raised the loader will not work, when the attachment is lowered to the ground or there is no attachment on the back it works or if the rpms are run up on the...

I need to replace the front dr. shaft, input housing on front differential and the driveshaft cover tube, any help appreciated, looks like I need to remove the piece that it coneects to at the rear, but if anyone has done this or any advice would be appreciated, located the parts at a salvage...

Need help in pricing a Woods 750 backhoe attachment, I bought a Ford 1710 tractor with a loader and the backhoe attachment, I have no need for the backhoe but came as a package deal, what would be a fair price for one that has been used but seems to work properly, has 2 buckets, 1 is a 8" and...

Looking at a tractor that is for sale, Kubota l275, tractor looks good but is very hard to crank, runs good after it is cranked the first time and also it smokes out of the breather tube, doesn,t smoke out the exhaust, any ideas on what may be the problem, not a mechanic myself, I can buy this...

I have a Ford 770A loader on a Ford 1900 tractor, one of the cylinders on the loader lift arm is starting to leak, what is the procedure for repairing this, any help appreciated. It is leaking around the end nearest the driver.

My Ford 770A loader has a cylinder starting to leak on one of the lift arms, what is the procedure for repairing this, any help appreciated.

Putting my Ford 1715 on the market, need some idea of what its worth, 1994, 4wd, power steering, manual trans, good rubber, exc. paint, been shed kept since new, 780 hours, factory installed Ford FEl, any help will be greatly appreciated.