Search results

Thanks. What do think it's worth?

I offered him $3,000.00 for it all. Will see what transpires.

I'm wanting to buy this tractor. The seller wants me to name a fair price, he won't price it.

Yanmar 1700 runs great w/ 6 implements, rottotiller, blade, 4ft. bushhog, disc, pole beam and a finish mower. The tractor is 17 h.p. w/ 546 hours. The body is average condition the implements are older and well used, but work. I don't know nothing about these little compact tractors or what...

Not a big deal, however, if the engine light blinks off and on then that is a problem. Have you checked all vaccum hoses? Have you conducted a smoke test? If the smoke gets sucked in especially around the intake, the intake gaskets need to be replaced.This is a common problem for these and other...

The honest answer is, these tractors are JUNK. This may offend some, however, the truth usually does.

No excuse for a tractor with so few hours to fall apart. I stick with Older John Deeres, don't have these problems and NO computers.

Thank you for your reply. I was thinking maybe the filter screen and hydraulic filter may be clogged causing back pressure, however, you probably are correct.

I have a 2240 John Deere that is leaking hydraulic fluid from a vent located on the under belly, there is a cotter pin in this small hole where the fluid is leaking from. Can anyone explain what the problem could be?

The price of $2000.00 is highway robbery. Do not allow them to load the tires, if you purchase the machine. If it has a backhoe, there is NO need for loaded tires, the backhoe is sufficient weight for traction. If you decide to load the tires I suggest 'beet juice' it is non corrosive and...

Many of us own a pond or lake that we stock with fish. No limit on the amount of fish we take..

I charge 'TRACK TIME' some call it ' seat Time' only those hours spent on the machine are billed to the customer. Depending upon the distance, I charge accordingly, example 10miles or less, no charge, over 10 miles and less than 30 miles I charge $150.00 over 30 miles flat fee of $250.00...

Hope you can post more photos as the job progress's good luck and thank you..

Control burn the field then rent a NO-Till Drill to sow in your seed. Check your local county co-op many have the drill for rent. No need to disturb the soil if you control burn and drill the seed in, fertilize as needed after you have taken a soil test and receive the results. Probably will...

Keep your head up and keep pushing forward, all will be ok..

I add anti gel as soon as temps hit 40 degrees and have not had any problems over the years. Start adding anti gel early, it's worth the the extra money in aggravation. For your problem I would drain the tank and add winter diesel with anti gel; if you have a way to tarp your tractor and add a...

Never ever direct wire anything to your battery without a proper inline fuse. You are flirting with disaster if you don't.

I don't know what gas tractor (s) your talking about, however, no gas tractor will outlast a good diesel tractor period!!

No way absolutely not. Gasoline tractors can never compete with a DIESEL and they don't last near as long..

All good comes to he who loves the LORD...

Time waits for no man..

A stitch in time saves nine..

"DULCE BELLUM INEXPERTIS" From ancient Roman Warriors-- War is Sweet to Them who Never Experienced it.

If enacted, this would mean the end of our freedom to buy ammo online. The plan eliminates the convenience of receiving rounds directly at your home before hitting the shooting range. Ultimately, banning online ammo sales would result in fewer in-stock options available, lower breadth of...

Anyone have experience replacing the coupler bushings that drives the hydraulic pump (front) on a 2240 John Deere? Such as where I can purchase and the part number? Thank you..

I have a problem with my tractor cranking after a couple hours of work. This is a NO Crank, I turn the key and nothing. Next morning it starts right up. It has a new battery, I replaced the ignition switch and had the alternator rebuilt. The battery tests at 12.8, and when running it charges as...

deleted

I lost the plastic hose on my anti freeze tester while checking the anti freeze quality. It fell into the radiator, I can't find it after searching and fishing with a wire for quite awhile. The tester is the small bulb type, and the lost hose is about 2 " long by approx. 3/16 " in diameter. The...

I have a chance to buy a 555 John Deere track loader dozer w/ ripper. The guy is asking $6900.00 obo , the undercarriage is about 40 % at best, but this is ok since I will not be putting to many hours on it, Just for use around my farm. I just sold a 450 and didn't put more than 200 hours a...

Can anyone suggest the best and cheapest place to find parts for a 6-way blade for a John Deere 450, such as bushings and pins ?

If you click on the picture it will enlarge so you can get a better view of the undercarriage, I will put more pictures up asap. Also, I just bought this machine and it will be shipped in the next week from Michigan. It is a 1968 450 no A or B just 450 it's one of the earlier models. The...

What would you rate the undercarriage at ?

Here are some pictures of the BD 2F Mitsubishi dozer. Could you look at them and give an opinion before I buy ? it appears like it has been sitting there for awhile. Year -1986 Make -Mitsubishi Model -BD2F Serial - Hours Showing -429 ?? Description -rops, 6 way blade, new rollers, rails...

Have a question, I'm considering buying a 1986 BD2F, the guy says it is "direct drive". Is this different from the standard version ? and is it a good transmission ? I have owned J.D.s dozers over the years, this would be the first Mitsubishi dozer for me. I don't know anything about them and...

Can someone tell me if the dash shift 1010 is as reliable as the standard transmission stick shift ? I have a chance to buy one, but I'm not familiar w/ the Dash Shift and was wondering if J.D. and owners had any problems with them.

I forgot to add a picture when I first posted. this is the set up I have, the pulled breaker is for the generator. s219 I didn't quite get what you said about the 2 legs not being hot, could you explain this ?

Why don't both sides of my panel work when back feeding it through a 30-amp breaker by generator ? Wire used , 10-3/w ground from breaker box, 30 breaker amp. double 240 watt. The wire then runs to a electrical box with a male L 14-30 generator plug, which the generator is plugged to . I also...

Has anyone built a gasifcation unit ? If so, could you recommend what design is the best, and maybe show some pictures of what you have built ? I'm looking to for a gasifre to run a 10,000 watt generator.

440 J.D. dozer w/ a GM diesel are they any good ? Do they have sufficient power to do hard work or are they mainly for the simpler tasks around the farm ? Looking forward to what you think.

Jim I bumped the starter to give you a different view, can you tell if it is a 2 stage or single, as he stated, or anything else.

Jim if you need more , tell me and i will get as many as you want. Thanks Jim

Mechanic replaced a clutch/pressure plate on recently purchased 1020 John Deere, the clutch is single stage, when a bush hog is attached and you attempt to engage the grinding begins which will not allow engagement of the bush hog. The only way is to pre-engage, and than start the tractor. The...

I have a problem with the angle part of the 6 way blade all other functions work ok. The machine had been setting for several months and upon starting it, I became aware that the angle does not function either way, it makes a noise like it wants to work but don't. Anyone have a idea what it...

TxJim, Does this look like it may work? Home > Tractor Parts > John Deere Tractor Parts > 2255 > Clutch > Remanufactured Clutch Kit Our Price: $322.00 Core Charge for item 202066: $27.00 Part Number: 202066 Qty:

Hello, I have a 310 Case track loader I bought last year to restore, I'm getting all the mechanical fixed first. On mine their are 2 nuts 1 locks the other in place. I never had a track come off but have adjusted the slack out. I would say you have it backed off enough to to get your track on...

My neighbors tractor, a J.D. 2020 gas stalled at the bottom of his driveway and would not start. He asked me to tow it up the hill to his house, the tractor has a loader so it had to be towed from the back (reverse). Upon towing it he heard a loud noise and the clutch, he had depressed went to...

i'M RESTORING A 1020 GAS J.D. . I have been working on the mechanics before I start body and paint work. The problem I'm having is hesitation it don't want to respond when I throttle it up a little fast, it also appears to be loading up when idling. However, it runs well under load but it...

Can anyone give me the height of a 950 John Deere WITH ROPS ?. The tractor will need to be loaded in a box type trailer. I need the height from the ground to the top of the ROPS. THE TRACTOR is a 1986 w/ mfwd, has 12. 2. 28" Ag. tires. I'm not sure how high the trailer door is, as the...

I have the chance to buy a 950 with 4 wheel drive. The tractor is located in Texas and I would have to ship it to Missouri (approx. $850.00 in shipping). The tractor needs some minor body work and a new paint job. Has anyone owned a 950 with 4 W-D ? and if so what do you think about this...

Hey looks great and can be a lot of fun and rewards of a job well done, hope to see the finished product. I completed a Ford 2000 here are some pictures.

[ATTACH=CONFIG]286832[/ATTAC My power steering was leaking from a bad seal located just below the valve body. When I removed the body ( has 3 bolts holding it) it contains ball bearings, springs and small valves. Springs and ball bearings attach to these valves that have ports in them, they...

jenkinsph , Hi, I located a couple of pics. of my 1520 gas with the p/s added, as you can see it's right there in full view, however, it sure works good and the nice part about it is you can easily take it off and the tractor is original again. I use the 1520 for most of the work around the...

I finished my 1020 not to long ago it does not have power steering either, but I am going to add a kit I used on my 1520 (gas) which I purchased on Ebay The p/s kit works very well, although it is not original , but sure is easier on the arms and can be taken off to bring the tractor back to...

Hello, I bought this tractor in the past week, and posted it on this site " HOW MUCH IS IT WORTH" since then I finally took delivery. I bought the tractor by pictures only, and was unaware of the set up that operates the loader. The tractor itself runs excellent and everything works as it...

This is a picture of the bush hog that comes with it. I want to thank everyone for their help and good advice. At $4500.00 dollars w/ a FEL and bush hog, I compared this tractor with others with no FEL or bush hog and learned the following: A friend told me to check tractorhouse,com, and...

Hello, This a 3000 Ford diesel w/ a loader and a 6 foot used bush hog. The guy is asking $4500.00 for everything. The tractor runs good and the loader works good. I am not a Ford guy and really don't know much about them. My question is, do you think the tractor is worth the price $4500.00 ? I...

Hello, Can anyone advise me as to where I may find a distributor for a 310 case track loader ? part # 1AD60032J PRESTOLITE 4 CLYD. I would like a good used one if possible.

HELLO, Can anyone tell me how operate the transmission on a 350 LONG ? according TO TRACTOR DATA the 350 has a hi/lo . However it only has one shiftier such as a normal 5 speed with out hi/lo. I know it has hi/lo because all 350 models were made with with this feature, also you can clearly...

Hello everyone. I need some help from the members regarding my pickup. The truck was involved in a head on accident at low speed, thank GOD. My question is Do you think my insurance company will total it ? Let me explain, The entire front end, bumper, grill headlights ect, was demolished, also...

Hello everyone. I need some help from the members regarding my pickup. The truck was involved in a head on accident at low speed, thank GOD. My question is Do you think my insurance company will total it ? Let me explain, The entire front end, bumper, grill headlights ect, was demolished, also...

I just bought a 820 John Deere, I think it is a 1968, I love old tractors especially John Deere. This 820 has factory P/s and is a diesel it appears it has been well maintained. I cant wait for warm weather to get here so I can tinker with it. Old tractors are a fine hobby or in my case a...

I have a 2510 Long when I try to engage to lever to turn on the pto it grinds and won't allow me to engage. this long has a syncro, feature, does this have something to do with it not engaging ? Any advice would be welcome. Thank you. JOE