Search results

take a sample and have it tested. find out if it is ok. in 1972 i had 24,000 gal of fuel put in the ground for a generator. it cost 13.5 cents a gallon. every year it would be tested and once in a while a gallon or two of inhibitor would be poured in the tank. when i retired in 2003 it was...

it sure is nice to take a noon break after dirving 50 posts. you can drive some really large posts if you drill a hole first for the corners.

or its a ----scam----and there is no tractor.

probably dont really have to raise a bunch of pigs. one big ol nasty boar should do the job. with a feeder for him to bang on all day and night.

it sounds like it is time to start raising pigs over on that side of the field.

the stabilizer bar is just about a necessity because the forks will not stay straight. a chain over the bucket on each fork tightened with a binder makes the forks fairly safe and keeps them from getting loose.

.22 mag and snake shot. S S S i have doctored horses and dogs and lost a dog to them.

by all means get a lawyer. and get it done in your favor. there is lots that can go wrong. it may be worth the money but check it out. i knew a guy that had several businesses and several cell towers. one of the towers had the lease come up for renewal and they met at the coffee shop to do...

if you want to get the job done and go on about your business buy a post driver and install the posts in a week then sell the driver. i have installed 50 posts in the morning and strung the wire in the afternoon for paddocks. done it twice. do 5 acres in a weekend. the secret is to wait...

i also have one of those and pull it with a 45hp tractor but i would not think twice about pulling it with a 37 hp tractor.

I asked him politely again: 'Can we have this car moved?' and he said: 'I'm not f—--g moving this car. “With that he punched me in the face, which rather shocked me. I said I was only asking him to move the car. " But he was acquitted of all charges after telling the jury: “An Englishman's...

a kilifer blade?

what is the shelf life of fuel? in 1972 i bought 25000 gallons of fuel for the company. it cost 13.5 cents per gal. and was stored underground. [ for nuclear emergency] we would pour a gallon or 2 of additive in every year but that is all. when that building was closed in 91 they pumped...

how many of you ever drive down the freeway and look at what the mowing crews mow routinely?

its a horse thing. they put a front foot right up under the wire if they try to reach over and when playing they will run right to the fence and put a foot as close as possible and turn. eventually ........... what you show is a death trap. i had a colt ready to win and was entered in a...

horses will eat next to the fence if you do not energize it. the likely hood of catching a foot in the barbed wire is 100 % over a five year period. they will get in a wire under 10 inches from the ground if you wait long enough.

the stabilizer bar is to stop the twisting. it does a pretty good job, too.

i am thinking he should go to san fran where horses dont poop in the street, but people do.

i had a set for about a year and used them a lot. so much so that i finally got a SSQA set. some notes; the stabilizer bar is a must i advise chaining them to the bucket--this probably kept me from bucket damage. [ and keeps them in place]

not no, but h111 no! move to the city.

https://www.go2gbo.com/forums/blackpowder-mortar-cannon-by-seacoast-artillery.88/

dont rule out the chiropractor!! 15 months ago i had surgery [ laminectomy] after PT for months. the PT did not help at all and really caused pain to escalate. after surgery i was again sent to PT and results were even worse [ if that was possible]. i tried hard to endure it as everyone...

another shaver fanboy here!

i tied one of these to the ignition switch...

i almost have a crown on my pen with just a few degrees down on one side and the sand will flow down hill. 18 inches will not make it easy to work your animal. it may drain but you will cuss it. you want the horse to work naturally and a slope will interfere with commands. also horses...

with very much fall your sand will always wash out. also dont forget that there will always be a worn area from working your stock that will hamper drainage if you dont have a french drain and tile.

i had a set i used for a couple years until i got a quick attach set. the stabilizer bar and chains are necessary for the forks so they wont turn or swivel. i did get a lot of use out of them but i get more use out of the ones i have now.

mom would stop and help any snapper she found in the road into the truck bed and then into the frying pan. snapper is the best wild game ever cooked. on a Canada fishing trip we were taking a dip in the lake and a rather large snapper started to come for my toes. he was about a 12 incher in...

save the backing that you received and make something else out of it. add a hay spear to move hay. make a cage man lift. brush hauler

and it was spinning on the shaft for 60 ft without cutting grass. try rotating the shaft 180 degrees to get the holes to line up.

i am getting ready to change the fluid and the picture in the book shows a drain plug but i can not tell where it is. i think it is toward the rear because of the location of the back tire. under the tractor right behind the oil pan is a drain plug and there is another back about under the...

bought a 51348 at O Reilly's Saturday. i always tell him to replace it because he only stocks one.

just out of curiosity, how many go to the trouble of hooking up the top link on a woods type mower? i have ran a woods rear finish mower for 25 years and never once hooked up the top link. same with a 10 ft bush hog. just never had a reason to hook it.

goats and mules are especially good at squirting through a fence between pulses or just getting shocked on the butt as they clear the far side. there is some super good info above.

if the guy that had that JD baler baled a thousand bales a year and he could not fix it ---------it needs an experienced mechanic. every 20 bales to miss a tie is a lot if you bale a thousand a year. if you bale a couple hundred bales then clearing the missed tie a half dozen times is not too...

buy new and get to work. you are on borrowed time to get this done before you cant drive a post. when it dries out wood will splinter and steel will bend. the best time to drive posts is right after the ground thaws. with a post driver you can drive 30 or 40 wood posts in an hour then take...

any fuses to check?

not that it shows up well but my pic above does say "howse"

i had a ford gasser that done that and i finally blew air back through the line to the tank and with a big thunk the pick up filter blew off. after draining out a quart of water it ran fine. i punched a hole in the tank with a sharp nail and screwed a roofing screw with a rubber washer in and...

howse??

i worked at a phone building that had diesel that had been stored since 1952. the big ol cat generator sucked a valve in the ice storm of 2003 and they installed a new generator. 20,000 gal fuel was pumped out and distributed to other phone buildings because it cost less that a dime per gallon.

a neighbor has one of the 7 footers and i sure like the way it cuts. i would consider one for sure.

21hp massy has ran a 5 ft woods mower for 10 yr. for lawns. it struggles in 12 in high grass. a five ft bush hog is a strain and i would not run one very much on this tractor with 17 hp at the pto. a 24 hp would run a 6 ft woods type in light grass and should handle a 5 ft bush hog. heavy...

a few years back one of my shooting buddies had a cousin that blew up a van cooking dope. killed him and totally destroyed the van.

i have always had shear pins in everything until now. i bought a cutter over the winter that has a slip clutch and wonder what is the proper adjustment for it. i loosened all the bolts until the springs were very loose and fiddled until i could turn it by hand. i hope that means the plates...

workmaster 45 quit. i changed the fuel filter. it would run 2 seconds and quit -no sputtering-just quit like i turned off the key. finally it ran long enough to get to the barn. next day it ran for a minute then quit. i drained all the fuel and put new fuel in. checked and drained the...

workmaster 45 quit last night. installed new fuel filter right away and then it would run for 3 seconds and stop. finally it started and with throttle wide open it would idle. eventually it fired off and i made it to the barn. this morning i hit the key and it ran for a minute and i went...

going to go a long way from home and be using my shaver driver on a tractor i have not seen to replace fence the Oklahoma tornado destroyed. i have always used a rear remote and dumped the return line into the tranny case. i also had to bungee the valve open. the available tractor is a 50...

so ---- my old lincoln tombstone's leads are shot. it was an old machine when i bought it back in----- well long time before 1980. the search engine turned up a thread on cleaning up the old gal. but no reference to the leads. they look like no. 4. did anyone do the clean up of the...