Search results

Thanks Torch... The photos I am sure will help people out to understand the type of seal/what it should look like. Not sure why I never took a photo of the new seal.

Torch... The 'speedy sleeve' is part of the seal. If you look up 5 post I show a photo of the sleeve. I should have posted to make sure you remove it before installing the new seal (I added those photos because some how they went missing from my earlier post). I added a photo to this post just...

Did you check above your 1st post? I know they aren't showing on the 1st page but they are above. Oil type... I am not sure (tractor has been gone for many years), I just can't remember. It could be hydraulic/trans oil or 80W90. You should be able to see/smell what type it is, not sure what the...

Photos posted, part2...

I was asked by a member to see if I could find the photos that aren't showing up in my 1st post... 13 years later, I found them on a CD (lol who says CDs in computers are dead). Photos posted, part 1

Shaya99... I think one of two things could have happened here. Either the bearing is not seating on the axle correctly (you say it is) or the more then likely problem, you didn't remove the "2nd" piece of the seal on the axle and that is stopping the bearing from riding all the way up, (because...

No... Here on this web site in my album, here >>> EDIT 3/17/24 Broken link, forum must have changed it again >>> Cat Adds 415F2 to Loader Tractor Line-Up – TractorByNet – Tractor Community & Resource

I was looking for a new tractor to replace my loved 1533 that was sold a few years ago. I was hoping for a 1643, but started looking at the Kioti DS models, if I go the route of a new compact I would have to go with the Kioti DS4110HS or DS4510HS, the 1643 is just to much. But my dealer had to...

Hey guys... I sold my Massey 1533 some time ago (it was a good tractor) and I am starting to look at tractors again and my eye started looking at the Kioti, for a few reasons, but the warranty time got me looking that way the most. In any case my dealer is a Kioti and Massey dealer and what he...

What can I get for my "05" 1533 w/FEL? Hi all... I was thinking about selling my 1533 with a 1525 FEL. It has 375 hrs on it and has been well kept by me and still looks really good to excellent, heck I even wax the thing. *2005, 1533 with 8x8 trans 375hrs R-4 tires Tractor mounted joy stick...

Yes 1st make sure your seat switch is good to go, then look at this http://www.tractorbynet.com/forums/massey-ferguson-owning-operating/106036-1533-no-start-problem.html <<< If that solenoid is weak I just wonder if it would do what you are saying is happening to you.

I just wanted to say a public thank you to CDsdad for helping me take care of my manual problem for my 1533. #1 reason why this forum is one of the best out there, we all help each other in one way or another. BUT CDsdad went way above what I thought was possible. Now for me in some way to...

EDIT... Photos that are missing are on page 8, posted 3-31-2021 I had a leaking seal on my pass side front hub to axle and I did the job today. I thought I would post some photos to maybe help others with this job. Looking for info on the net to help me out (I never did this job before) wasn't...

Hi guys... I had a nice surprise today while cutting grass, I happen to notice the right front side axle swivel housing seal is leaking. Cleaned it up to see how much, and to put it in type I would say a drip every 3 seconds, so needless to say I need to replace it. I did do a search here on...

I was just wondering if anyone has used Hydraulic fluid from Tractor Supply and if you have what was the make/cost? I have a geared trans so I am not that concerned about getting the Massy stuff... Or should I be? I am not doing a fluid change, just topping off. I didn't notice one of my FEL...

Hello all... I went out to start my 1533 to cut some grass and she refuses to go to work, I guess a Union got to her. All was fine on Sunday, it was running like it always dose, great and it also started like it always dose, great... What I have checked. Fuel... Almost fuel Battery... Full...

Sooner or later we are going to move to much bigger piece of land of around 150+ ac (farther north then we thought, back home to Western NY) and start growing our own hay for our horses and hope to sale hay as well. In any case, what is the right model and HP rating to do this job and to make...

The wife and I are thinking of adding Annual Winter Rye this year, but we are wondering is it worth the money to do so. We have about 7ac that we would like to drop it on and that 7ac will have horses on it all the time. So I guess I am asking you all to help us out with anything you can. Is...

I just had to show this photo of 2 of our Pups. Look at that team work to sleep in that water and keep their heads up.

There has been post here and there to what kind of cut you would get if you used your brush hog to cut your “non pasture” grass. So I went out today, sharpened the blades, set the mower so the blades were about 6” off the ground and started cutting at 540rpm 1st gear, high range. This section...

Hello... I was playing, um I mean "working" around with my box blade to see some of the things I could do with it the other day when I needed to use the differential lock because of one wheel spin, but half the time I couldn't get the thing to lock. Now I know you all weren't here, but what am I...

As far as I know it is is the same. 3,500 less? Wow. Just make sure you are seeing everything. Same trans and so on. I just can't see how they would sell the "same" tractor but diff color for that much less.

Ok well after having my Leinbach L-7200 post hole digger I got "months" ago I thought I should play with it on the tractor and see how it works. So I have it set up on the tractor with a 9" bit and I start to see what she is all about. Problem 1... I have to cut the guard at the point where the...

Well Jerry asked for photos so I added 2 pages of them. More to come if you all wish, just let me know what you would like to see. I think the next set I will make is with the hood open and side panels off. Click my sig to see the photos. Oh by the way... Thats right you other 1500 owners...

I was wondering if anyone had a Quick Attachment for their FEL? I am thinking on getting one, but I don’t know where to start. Is there one that is a “bolt on” for a Massey 1525 FEL? Is there anything else special that has to be bought to use the stock bucket with the attachment? Where to get...

Hello… To start off this post, we are going to relocate to Tennessee from Florida. We are just starting to do this by putting up our land for sell and knowing we would like to go to the Crossville area of Tennessee. Are plans are to get as much farm land (no house/structures) as we can afford...

1533 or 1540 \"Power Shuttle\" owners... I was wondering if someone with a 1533 or 1540 Power Shuttle trans could take a picture of you "crank" adjustment (right to left level) of the 3 point hitch for me and post it here. I would like to upgrade my tractor with that adjustment and I am not...

Best on line \"small\" tool store? Hello everyone, I hope I have this in the right place on the forums. I am looking on getting a Dewalt 4 1/2" grinder, see link below. http://www.lowes.com/lowes/lkn?action=productDetail&productId=58972-70-D28402K&lpage=none So I was thinking of getting this...

Ok I know it's a BIG lawn mower blade, but really what is the best way to sharpen brush mower blades? What should be used to sharpen the blade? Can you do a good job by leaving the blade on the mower? When do you know when they need to be sharpened? Can the blade be sharpen down to more of a...

I was wondering if anyone could give me a per hour rate (tractor clock) for tractor work? The wife wants me to do some work for a few people (and others when the work comes along) that she knows and we need a way to charge them, but I have no clue, well I guess I do, I have heard $65.00 is a...

I just removed my Massey 1525 FEL for the 1st time today. I was wondering if I should do something to protect the Chrome on the pistons? I have about 4” on all 4 pistons showing chrome. I do live in Florida so snow isn’t a problem, BUT rain and humidity is. I was thinking to wipe them down and...

Here are the pictures I said I would show you, if you don’t see something you would like to see, let me know I will add it. Any questions please ask. MF-1533 8x8 SynchroShuttle Trans, Factory Joystick and 1525 FEL W/60" Bucket Engine... (it is in there somewhere, I hear noise from there when I...

I hope someone could help me here. The wife came home with a nice 8’ chain harrow and a lift bar (?) Here is a pic… (note this isn't the one I have, mine is better built, well it seems to be and I have a loop in the middle as well as the one at the end) Now I am just assuming this is a “make...

Hello… This coming week is delivery time for my Massey 1533, BUT… My 1533 that I want to get (dealer has in stock) has the OPTIONEL JoyStick on the fender for the 1525 FEL w/60” bucket (also in stock). Here is what the dealer has to say… He would give me a 1533 (WITHOUT the optional joystick)...

Hello everyone. I have looked all of the forums to get a thought of what size trailer I would need to SAFELY haul my MF-1533 and just can’t find anything to help me. I don’t have the tractor YET, but we are a week or so off STILL. Anyhow here is the problem. I have a wife that is the money...

Hello everyone. 1st time posting and I am sure it will not be the last. Great site! Ok here we go. I need some help on what Tractor to get. My Wife and I are looking at 2 tractors, the GC2300 (the wife wants that one) and the 1428v (I want that one). What the tractor will be taking care of is...