Search results

I use Power Service year-round. More importantly, I use only #2 diesel, not bio-diesel from the local gas station. Experience is a good teacher, but she gives the test and then the lesson. I learned the hard way that bio-diesel gels when the temperature is not really that cold. #2 does not. It...

There’s an old saying which suggests that experience is a good teacher, but she gives the test and then the lesson. Several years ago, I bought a new Stihl trimmer and used ethanol mixed with Stabil. In six months, the plastic fuel line had to be replaced (under the warranty). The fuel simply...

Last spring, I needed a new battery for my 2007 John Deere 2210. Ended up at Sam's. A Durocell came with a three-year full replacement warranty, whereas all of the other batteries had a one-year full replacement and a two or three-year pro rated warranty. Prices were about the same for all...

This is very helpful. Thank you!

No, I am getting braking from the pedal. At least if I hold it in place, the tractor does not move or roll. The locking lever which you describe is not engaging. How to fix that is my question.

I have a John Deere 2210 with 680 hours. The parking brake has stopped working. It will not engage when I push on the brake pedal. I can find nothing on line re: how to adjust the parking brake, and the local dealer’s only answer is to bring it in for a costly repair. I think the 2210 and 2305...

A local Facebook listing has a 2017 John Deere 1025R with 312 hours, I match set up, 60” drive on deck, 60” Frontier tiller and rear blade. Based on the video, the tractor looks to be in excellent condition and well cared for. Still has some warranty through 2023. Seller is asking $16,900. Is...

I have a John Deere 2210 that I bought on ebay 11 years ago. Tractor had only 50 hours and was being sold at about half the original price due to a divorce. It’s been a good machine. I live two miles from a JD dealer, but I have had nothing but bad experiences there which has mirrored the...

I gave up on Stihl a few years ago. Too hard to start, even with Trufuel. The arthritis in my hands made it impossible for me to pull the cord. I bought an Echo GT225 with their version of easy start. It does what Echo claims: Starts easily by releasing (not pulling) the cord. And replacing the...

My 2210 just turned 200 hours, so I am getting read to change the transmission hydro fluid, the front axle gear oil, the fuel filter, and the oil. The tractor is six years old; I am the second owner. The antifreeze tester still shows five "balls" floating in the tube and a low temp of -30...

As usual, I know enough to be dangerous. Went out to mow this evening on my 2210. When I turned on the key, I heard a click, but the engine did not turn over. Turned the key off and tried again. Nothing, not even a click. Removed the front of the tractor. Found the positive battery terminal...

I have a 2210 which is approaching its 200 hour mark. The hydraulic fluid was changed at 50 hours just before I acquired the machine. A friend who does maintenance on John Deere equipment at a local cemetery suggested that instead of changing the fluid, I only change the filter. He contends that...

Discovered a problem this afternoon while winterizing my pull-behind sprayer. The 62C MMM deck is not raising fully on the right side. It drops down just fine, but when I raise it, the left side raises to the full height but the right side droops. When I have the deck locked in place, the left...

For my 2210, the owner's booklet says to use JD Coolguard Antifreeze. Elsewhere, the booklet says to use antifreeze on a 50/50 ratio that is designed for aluminum engines. Does anyone have any recommendations as to what specific brands of antifreeze might be acceptable other than JD? The...

Does anyone know of an after-market front blade that will fit a John Deere 2210, including mounting bracket, hydraulic lines, etc? (Tractor has the hydraulic outlets and control stick already in place.) I have plowed for years with a rear blade, but arthritis has taken its toll. I plowed a 7"...

Does anyone have a good source for a grill guard for a 2210 (other than the local JD dealer)?

According to the owner's manual, the sight glass should be at 1/2 or 3/4 with the implements fully lowered and when the unit is cold. Mine shows about 1/8 full and 7/8 empty. However, after mowing, it is just the opposite, i.e., only 1/8 empty and 7/8 full. Is this normal? I realize the fluid...

Other than removing the deck (which I do not want to do), does anyone have any experience in changing the oil on a 2210? There's not enough room for a tray or pan. The local dealer says he uses an old piece of rolled up cardboard to drain the oil to a pan, but I can't see keeping an...

Does anyone know of a small (150 pound capacity or so) spreader that mounts to the category one three point hitch that has an electric switch to open and close the mechanism (gate)? I've used a Herd M96 for many years, but with a bum shoulder, it is getting increasingly difficult to turn around...

Does anyone know of a small (150 pound capacity or so) spreader that mounts to the category one three point hitch that has an electric switch to open and close the mechanism (gate)? I've used a Herd M96 for many years, but with a bum shoulder, it is getting increasingly difficult to turn around...

A number of years ago, John Deere offered a small plastic height gauge which simplied setting mower height on suspended decks. Does anyone know where to purchase one of these?

Other than removing the mid-mount mower (which I do not want to do), has anyone figured out a way to change the oil on a 2210 that does not make a royal mess? I thought I would ask before trying this task. Thanks. . . .

I got my 2210 last January off ebay, and it has worked out just fine. I was surprised, though, to discover there is not a glow plug for starting. Does it start just by compression? How will this arrangement work out next winter when temps can get well below zero? I've used a block heater in the...

In a previous thread, I sought advice concerning the interface between the height control knob and the anti-scalp wheels on a 62" MMM for a 2210. The replies were very helpful. However, it appears there is something wrong with the height control mechanism. The deck will not lock in place. No...

I am confused with the 62" MMM that is on the used 2210 I purchased recently. Can someone please enlighten me concerning the relationship between the four anti-scalp rollers (each of which has its own adjustment) and the knob that controls how far up and down the deck moves? Right now (which is...

I recently bought a JD 2210 with 78 hours and am now trying to become very familiar with it. I have the mid-mouint 62" mower. The owner's manual says that I should remove the mower to change the blades. With any other deck in the past, I just drove onto ramps and changed the blades. Is there...

I have a B7510 with a 302 Front End Loader. I put the FEL on today, but it will not move up and down. The bucket rotates just fine, but the loader itself seems to be stuck where it is. Any suggestions as to what may be causing this problem and how to correct it will be appreciated.

Can anyone tell me if using a front snow blade on a JD 2210 requires removing the mower deck? Recently, I bought one used and am interested in acquiring a front snow blade. However, a local dealer told me the deck has to come off to use the snow blade. What is confusing to me is that photos on...

I've come across a front snow blade for a JD 2210/2305 for sale for $900. Mint condition. Used once. Is this a fair price? What is involved in hooking it up? What parts have to remain on the tractor? Is there a frame which gets in the way of oil changes, etc.? How big is the unit? Can it be...

I have a B7510 with an RCK60-248 Mid-Mount Mower. My old B7200 MMM had a large roller in the center of the rear of the deck. This mower replaced that roller with two solid rubber wheels. In dry weather, they leave an unsightly appearance when mowing. In damp conditions, they tend to dig in and...

On John Deere's website, the survey suggests a 2210 would be ideal for my use. (Mowing an acre, plowing snow on a long drive, spreader from the 3-point hitch, etc.) Does anyone have any experience on how well the MMM 62" cuts? I am looking for a very nice, smooth cut on a very visible lawn...

Anyone have any experience with the MF 1417 or the GC2300 as far as overall tractor quality, quality of the finish mower cut, differences between the two models? I am mowing a little over an acre. Need to do so at same speed as present (45 minutes) and to be able to use 3 point for other...

My primary interest is in finish mowing. Need 4WD and 3 point hitch. Prefer a MMM rather than rear. Who makes the best equipment? If price were no object, what would you buy in a tractor under 25 hp and a MMM? Please be specific as to model, etc.

I had a Kubota B7200. Loved it, but needed 4-wheel drive for snow plowing. Sold it and bought a used B8200 with 4WD, but it was too hard to steer with my bad shoulder. Traded it for a BX2200. Did not like the mower. It did not cut evenly. Dealer, regional man and factory rep all got involved...