Search results

Firmly push the brake pedals down and pull the orange lever shown above up to lock them in place The lever might go down to lock?? I can't remember. I do it so often it's just muscle memory

Air carbon arc cutting is what I would do. You can remove the weld and pull the part out without damaging the bucket I takes a little practice but it's easy and once you get good at it it moves quick

I posted a pic of her in this thread when she was a puppy. She's two now

Pelvis from a deer. I see them every winter

You talking about the two brothers? I watched it and the seal was dry. It should be oiled. All air filter seals should be greased or oiled. Anyone that thinks otherwise needs to educate themselves

The cover has a quick nut that locks it together. My 661 has the same setup and it seals just fine Here is a pic

Had a pilot error. Roof got in the way Glad I bought the insurance

I have a ranch. The highest gutter is 18 feet Just under 400 feet of gutter and I was done in about 90min. That included blowing the gutters, launching the drone and blowing out the bad spots a 2nd time

I have the same GenY and love it. Took a while for me to justify the cost but once I bought it I kicked myself for waiting The only issue is if when borrowing a trailer or renting equipment. The chains are never long enough so I have to use a standard setup. This past weekend I rented a boom...

These have been around forever. They are cheap, easy to use and they work

May be old but they don't get much easier to fix

I found a new Peddinghaus model 12 at an auction and got it for a little over $600 I had been looking for years but never found one worth what they were asking. I was actually looking for something else when I saw it. It's been sitting in my warehouse for a couple of years but it will soon be...

Buy the sit down version

This setup handles hills very well and most manufactures have this option now

Motion Pro makes excellent gauges that are accurate. Not cheap but it will last forever

I went to the bank early last weekend to withdraw some cash and these two beat me to it

Here is a movie you either get or you don't. No in-between You can watch the whole movie on youtube

Had the same issue with my 1750M except with mine it pushed up into the fuel tank cross over and dumped 5 gallons of diesel I bought new parts and replaced everything but I was not impressed with the 16 gauge 3 piece "skid plate". I plan on building an actual skid plate I had to replaced #1...

New Lodge on left old Griswold on right. The smooth Gris takes seasoning just fine

Your other thread got me wondering about my 1750M so I went and looked at it. I regularly hit roots with my blade that stops the tractor in its tracks but have not broken anything. My casting has supports on both sides. Keep us informed on your dealer/manufacture experience

Deere makes the 5100ML that is low profile

Do the oversized R1s really look like what the catalog shows?

The new Lambos are good looking tractors

Looks torn to me

It probably ripped apart sometime during use. No telling when This is what it looks like

Last year I was looking for an alternative to Roundup and found this. It works You can buy it by the gallon or all the way up to 275 gallon totes 2% Omri Listed Horticulture Vinegar Weed Killer

Nope. Same

Have not read the whole thread so this might have been posted I ride dirt bikes and the tanks are almost always black and seeing the fuel level is near impossible. These make it easy to see the fuel rise and they have never been a problem Gas Balls – Moto Hose

Like 3T said dual action sander My pans at home never performed like the old pans we have up at camp. Mine were always sticky and the camp pans were easy to cook on. I noticed how smooth the old Griswold pans were so I tried sanding mine before scrapping them. It doesnt take much and you dont...

Taken while running the dogs

My saws and installed bar length MS201T - 12 MS261 - 16 MS462 - 20 MS660 - 25 The only saw I swap longer bars on is the 660. The other saws started off longer when I bought them but I have settled on what I listed. If I need a longer bar I go with the bigger saw. The 462 can pull the 25 it...

20 gallon 13.7CFM and it is portable

CanAm makes quality machines. I owned a Commander for a few years with no issues and friends of mine have owned CanAm 4 wheelers for years with no problems. The Commander has a mid engine and the heat it generated was my only gripe. The Defender has a rear engine so the heat sin't an issue and...

The culprit? The announcement comes as scientists in China say the pangolin, a type of scaly anteater, could be a possible host for the coronavirus that has killed over 636 people and infected nearly 31,400 globally, according to a report by Reuters on Friday. Reuters reported the genome...

Here is a pic of it all cleaned up with the wheel center caps in place

I ordered one back in November and it came in today. Picking it up tomorrow :)

While taking the dogs for a run last fall

Trying the resize method described above and keeping with the "Where's Wally?" theme

Here are some pics from our trip to Colorado

I bought a Woodland Mills WC68 about 6 months ago and have no complaints. It's taken everything I could stuff down it's thought with the exception of one bent and knotted piece of oak and I found that it loves hickory

This guy was a regular visitor last summer. He would hang out when I was grilling

You can buy these on amazon

219 Tractor Christmas Light Show by Messicks & Kubota - YouTube

I have seen plenty of UTVs with BFG mud or all terrain tires mounted

I was in the same boat although EA was almost 4 months out when I called them. I did some shopping around and didn’t like the feedback I got from some of the manufacturers so I called EA again....customer service was great They told me about the owners brother that owns Construction Attachments...

I think tractors need to catch up

Nothing progresses like it should 1989 Ford 2019 Ford

I bought the WG24 a few months ago and have ground around 60 to 70 stumps now. I'm really impressed by the ease of use and how quickly it will grind. I've ground oak, cherry and elm with a few hickory mixed in. The grinder makes quick work of anything under 10". The larger stumps take some time...

I punched a hole in the tank two weeks ago. I followed the diesel trail and found a short log jammed into the dirt. Front tire must have lifted it up and it wedged itself onto the left tank. The useless skid plate isn't even a 1/16" thick

1000cc gas so HP should not be a problem......tracks optional

Malamute. Here is a pic from maybe a month ago of her curled up with my wirehair. He's 64lbs

Our somewhat new addition. She is 12 months now

I gave up on the plastic gas cans and bought three justrite steel cans. Two 5's and a 2 gallon. I've had them for years and they don't leak and no mess unless I over fill the lawn mower. The jerry cans are also a good option They may cost more but they last forever and eliminate a lot of hassle

Been clearing a lot for our new home. Lots of nice oak with a few rocks mixed in

One of our dogs tangled with a skunk twice last year and was sprayed from a distance three other times.... trust me you can tell I tried every concoction I could find on the internet and multiple store bought products but the one that worked the best was this. I told my wife it will never work...

I bought one of these a few weeks ago. I was skeptical but thought it would be good for touching up the chain in the woods. It works great and takes only a few minutes so I bought another one for my 3/8 chains

This looks a lot like one to me

I tracks? No mouse? No peanut butter? Traps still set? More holes? You need this

I know this has already been discussed but this video is informative

We bought some wooded property a year ago and it has some of the biggest wild grape vines I've ever seen. The vines are tangled up in the canopy about 70 feet up so I went around with a hatchet cutting them at the base last summer. Most fell to the ground over the winter and the rest are ready...

Did you see this?

The steel will rust at the scratch...nothing can help that...but the water will not get under the coating. As the part continues to rust the metal will scratch will continue to widen but you should not see powder failure until several hundred hours of constant exposure Here are some steel parts...

We buy a lot of supplies from Amazon for work and we often see prices for the same item costing less on different computers here in the office. One guy will send me a link asking for mew to order and the price on my computer is different than it is on his These filters have been in our saved...

I went with a deck over. Loading skids and other material is much easier without fenders

You should have a line indicating the rpm required for 540 PTO rpm

The wheelbase for the 1740 is listed as being 1-3/8" longer. I have no idea why it would be longer since the everything but the HP is the same. Maybe a larger front axle???

Brakes are on the right above the treadle

My truck has 95k miles on it and I plugged it in for the first time last night. It still protested this morning

The Village of McLean solved the problem

Probably the Mexican Gray Wolf seeing as you are in Texas The ears and coloring are right and they have long fur

This stuff works great. I use it on everything including my pole saw It dries fast with no film and lasts a long time

I did order my Massey with the HD bucket which is just a skid steer bucket. Even says "Type: SKID STEER" on the label

This is the only deterrent I have found to work and trapping works better than shooting. We have property up north and have been battling beavers for years One beaver can be a destructive rodent

Had the same problem about a year after we bought a new washer even though the plumbing had anti hammer fittings. Talked to a buddy and this solved it Hammerstop is the brand

This unit will maintain both batteries. You can find it for less than $90 online 22-165-DL-WH

My 1750M was delivered today

My new 1750M was delivered today and all went well. I decided to crack open the manual when I got home and had a hard time deciphering it :confused2: Does anyone know if the dealer can send me the English manual as a PDF?

Looks to me like carpenter bees. They make perfectly round holes and love old dry wood