Search results

Several years ago, I too wanted a decent log splitter. The local farm type stores/lumber stores wanted $2k for a hydraulic splitter (no log lift). Splitter with log lift $8k+, order one and wait for it to be built. Kinetic splitter about $3k, what I chose, no lift but a 2 second cycle time...

Learned my lesson a few years ago, left mower deck on, locked in the "TOP" position when the under carriage filter froze up. Can't lower deck if 3pt can't be raised up, very limited space for a heat gun (lucky to be within 100' of an outlet). Just added extra hoses to move my filter.

https://www.bitchute.com/video/zD3FJE7GtiLf/

Propane tractors are/were gas tractors converted to run on propane. Diesels have greater low rpm torque, that's why gas engines fell out of the marketplace

Varies 6' to 10' wide, implement dependent. Stalls 8' deep. Once enclosed, may store extra lumber in the back of the stalls.

Might add a roof this year

My solution uses the grapple, needed for cleanup after the de-limbing https://www.orangetractortalks.com/forums/threads/found-new-job-for-root-grapple.46710/

I like the Danuser Intimidator. Thought it would be too much for Kubota B2650, went with Kubota STP25. Brush under 3/4", usually snaps it off. 1-2" FEL usually pulls it. 3" brush/trees, often have to be in 4wd and drive forward while pulling. Sometimes have to release tree and try from different...

After cleaning out my drainage ditches with a BX w/air filled tires. I bought a B2650 w/rim guard in rear tires and a ballat box filled with solid cement blocks. Something every tractor/loader manual advises against -- UNLEVEL GROUND

When you lower loader, push harder, FEL should have a float position. Bucket may have a level indicator on it, if not top of bucket should be parallel to the bottom. Mostly just a learning curve using the bucket.

Can't make gas, diesel or propane, then solar could be a solution. A large solar gen is basically just a battery. You can recharge it with solar or gas gen. I am using ecoflow equipment (need more solar panels). Their Delta solar gens can start/stop their gas gen to recharge the battery...

Survived my 4 day power outage using ECOFLOW equipment. Delta Pro, Delta Pro extra battery, Smart gas generator (recharges 48v batteries with DC power) and 1200w solar array. This equipment ran a window A/C, TV, Ice Maker and microwave. Used the Delta Pro to recharge smaller Delta 2's to run...

You might consider these, they also make battery powered units. 2k or less in cost.

Correct idea, the top link setting makes the blade dig in, tranport material or spread material. A hydraulic top link makes the tool work it's best.

Talk to sales, they order from whole goods (kit pricing), 2nd on telescopic links

When the tube starts leaking, the highly corrosive salt will rust out the rims. I would drain the fluid, remove the tires, clean tire & rim. Rim may need to be repainted before remounting tires with new tubes.

Road service for the "big rigs" use wd-40 to test for fuel/sensor problems for the computerized engines

modern day version http://www.hoelscherinc.com/prod_grgrader.htm

ton of sand on car roof? https://www.bitchute.com/search/?query=this%20guy%20thinks%20he%20is%20going%20to%20move%20a%20one%20ton%20bag%20of%20sand%20on%20top%20of%20his%20ford%20focus.%20%F0%9F%98%B3%F0%9F%98%86&kind=video

grain truck vs overpass https://ifunny.co/video/ReQuJ3yKA?s=cl

It's above the mower deck, in front of the hydro cooling fan. If you leave the mower on over the winter, most owners will rotate the mower height control to the TOP setting. If the filter gels up, motor dies, can't unlock mower deck if 3pt won't rise. You can do nothing and wait for warmer...

Here's my homemade bucking table https://www.orangetractortalks.com/forums/threads/processing-firewood-the-professional-redneck-way.57673/

http://www.hoelscherinc.com/prod_rbscraper.htm

You need about 7' of fuel line, splice and some decent clamps. keep relocated filter low - it' gravity feed from the tank.

If you know how to use an AC voltmeter, check the voltage at several outlets. If readings fluctuate or exceed 125 volts, contact power co. to check incoming lines for loose connections. Had a bad neutral connection once and lights would brighten and dim, fans change speed, ect as the loads on...

Part of the plan to force solar on us. The larger (not portable) solar generators can be programmed for 'time of day rates' Can power home for the 3pm to 7 pm rates and recharge from the grid when rates are lower. Solar panels not needed but, can lower power bill even more. Solar panel size and...

For members who don't knoe these exist https://www.azteccontainer.com/storage-container-40ft-full-side-open/

Diesel Gas in small metal shed with 4x8x16 solid cement blocks under plastic cans to help regulate the temp of the fuel.

Having a facet drip or trickle may not prevent pipes from freezing but can prevent them from bursting. Good This Old House video explaining it.

I'm thinking yes. You may have to replace starter solenoid. Ford and others have a 4 terminal solenoid. S terminal goes to keyswitch. I terminal goes to ignition coil for a hotter spark during starter.

You'll love it. Many think about using down pressure on auger. Mistake, if not careful you will lift the front axle off ground. Tractor can rotate right or left. Then you have to realign auger with hole to finish drilling. If tractor starts rocking (hopefully a tree root) take FEL out of float...

I'm interested in this for a rock screener https://www.flipscreen.net/mini-skid-steers-0-1-5t/

If your neighbors have 2wd lawn mowers with turf tires, try this prank during "spring fever" season. They'll fill up their rollers and get stuck in the first wet spot they encounter 😁

Have ballast & filled tires, rocking back & forth can lift rear axle off the ground. Slowly pull forward - can envision breaking tractor when I get too aggressive. Clamping a little higher up and curling down while driving forward applies twisting forces on roots. Sometimes pull again at...

Something to consider http://www.hoelscherinc.com/prod_rbscraper.htm http://www.hoelscherinc.com/prod_grgrader.htm

Can't recommend solar as a solution. However Ecoflow delta2 has LiFePo4 battery chemistry, 1800w inverter, 1024wh battery (about $1k) 1800w gas gen (dual fuel) about $1400, runs on gas or propane. The solar gen can start/stop gas gen to recharge battery. Downside special charge cable is 16'...

Solar generators are newer, better solutions for backup power. 2 things you need to know running watts & starting watts (watts = volts x amps). Look at Ecoflow Delta2 or larger unit. Other portable solutions include Bluetti, Zendure, Jackery. Small gas generator better choice to recharge...

This old house (PBS) demo'ed this, closed off water valves cause this, nowhere for excess pressure to bleed off. If you have a yard hydrant, make a water hose to air hose adaptor. Water pressure usually 60psi. I open water valves and use 100spi air, never hits 100 with valves open. Flush...

get one with piloted check valve, it will stay where you set it this is what I used on a Kubota B2650 https://www.agristoreusa.com/collections/category-1-hydraulic-top-links/products/category-1-hydraulic-top-link-18-1-8-26-3-8

call small engine warehouse, they may have a direct replacement engine https://www.smallenginewarehouse.com/

Used this for well, gen cord plugs into it and need to flip swith from line to gen. https://www.amazon.com/gp/product/B000K2CV00/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

https://www.spartanequipment.com/products/auger-stump-grinder-style-planer-bit-10-dia-with-2-hex-collar.html Pay attention to the cutting sequence drawing. Small tractor with low oil flow, the auger can screw in and take too large of a bite. Reverse auger 1/2 turn, lift FEL to reduce down...

You may want to consider a SSQA auger. Easier to connect, no neck strain, can reverse if you hit something solid, may be tax deducable if starting tree farm. Using planning auger to remove tree stump

Here is an electricity-free pellet stove...

OLD SCHOOL: I have several 1500VA APC UPS units. All are 10 yrs old or more. All of them are modified sine wave, use sealed lead acid batteries. AC motors want pure AC sine waves. Batteries need replaced 3-4 years. UPS only runs about 15 minutes, just long enough to properly shut down computer...

Hopefully, the rest of my life. Heating with a pellet stove with solar & gas backup generators. Can heat with wood as last resort.

The shed I built and stocked this summer my processing setup how I built the bucking table https://www.orangetractortalks.com/forums/threads/processing-firewood-the-professional-redneck-way.57673/

The BX's have a fuel filter in front of the hydro cooling fan. Had same problem as landrand with mower deck locked into TOP position. Real hard to get heat gun on filter. Bought 6' of fuel line, clamps and a splice to mover lower filter in front of FEL mount and use power service on a 50gal tank

How much inconvenience can you tolerate? Everything must work = total home backup generator. Must have heat, candles & flashlights Ok -- small generator, recommend inverter type (60hz A/C x 60sec/min = 3600RPM engine speed. Inverters can run slower, saving fuel $) How long of a power...

look into NEVER WET or SUPER ULTA DRY https://www.youtube.com/channel/UC9jSKuBlBpkp47-Kis89jXQ https://www.bing.com/videos/search?q=super+ultra+dry&view=detail&mid=AD198AD12B4205F460A3AD198AD12B4205F460A3&FORM=VIRE

Kinetic splitters are scary fast, around $3k. Built a "bucking table" so there isn't any bending & lifting rounds https://www.orangetractortalks.com/forums/threads/processing-firewood-the-professional-redneck-way.57673/

https://www.orangetractortalks.com/forums/threads/lp-sa-20-hydro-auger-stand.60065/

something like pto link & QH for the tiller

https://www.amazon.com/Electricity-Monitor-Voltage-Overload-Protection/dp/B07DPJ3RGB/ref=sr_1_1_sspa?crid=1JSF3MJJVXRUY&keywords=killawatt+meter&qid=1670614306&sprefix=killa%2Caps%2C630&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFWMjEwSFBRUldVOTAmZW5jcnlwdGVkSWQ9QTA5MzI2MTAyQzdJRE5YTVhVTzF...

https://www.flipscreen.net/mini-skid-steers-0-1-5t/ flipscreen link -came up with weird name

Was using 1500VA APC unit, it wasn't pure AC sinewave UPS. Motors sounded funny running on it. Would power stove 12min or so, beeps when AC fails. Gave me time to drag out 1000i HONDA generator (runs about 7 hours/tank of gas) Abou $200 for UPS, $1000 for Honda. Used the APC unit 6-7 years...

Depending on how it's routed, BH needs the correct length of hose. Now on my grapple, extra length is not an issue. I use 4' NPT hoses from TSC. The adaptors and fittings don't wear out and can be reused. Extra hose, only $20, faster and cheaper than an emergency trip to town.

Electric heaters pull a lot of amps. You may have to put in a 60amp or bigger alternator. 2nd the suggestion to go with water based heater, the fan would need power, current dynamo or alternator should handle it. Adding electrical stuff, some of mt posts...

No red flags needed

Contact split fire, they might be able to adapt an excavator model to backhoe. https://split-fire.com/us/excavator-wood-splitter-3209-us/ I made a bucking table to make the job easier for me https://www.orangetractortalks.com/forums/threads/processing-firewood-the-professional-redneck-way.57673/

A roof & 3 sides are a project for next year. Working solo I've built a bucking table, woodshed & stocked it and started the Kubota toybox

Don't know if it's an affordable option, but these are available https://www.alibaba.com/showroom/plastic-driveway-grid.html

My solution https://www.orangetractortalks.com/forums/threads/lp-sa-20-hydro-auger-stand.60065/

Store the implements on stacked up pallets of build an elevated shelf

Have a pair of these, one of the best investments I've made. https://www.rockler.com/kreg-kws500-track-horse Makes a good assembly/work platform - better than forks, no FEL leak down

States with soft sandy soil, in a hurricane zone. the tanks can pop out of the ground. If you have a buried tank and expect a hurricane land fall, you want to make sure tank is filled.

o_O how do they install the cable

Only problem I see is the sawmill. For firewood, you can cut shorter logs. 25hp "B" here, they're "LX" now. Real "L" has more lift capacity. https://www.orangetractortalks.com/forums/threads/maxed-out-b2650-fel-lift-capacity.53711/#post-492208

https://www.tractorbynet.com/forums/threads/adding-electrical-devices-to-tractor.425790/ If I were going to do it again, I'd consider using this inside a waterproof box...

B2650. Brush under 3/4" may pull, usually snaps off where it's clamped. 1-2" FEL usually pulls it. 3" stuff, clamp it and drive forward. Cut top off 4-5" spruce tree. A few months later decided to pull it. Tractor has rimguard in rears, using 4wd. Had to rock tractor back & forth about 20x...

The Kubota/landpride version

Plan to add roof and sides to "Kubota Toybox" next year Elevated shelves for SSQA attachments are awesome

Several likes on post 21,099, adding link to my bucking table build. https://www.orangetractortalks.com/forums/threads/processing-firewood-the-professional-redneck-way.57673/ If you use it in youtube videos, would appreciate link to OTT post.

My firewood processing setup

Went from this To this Plan to put roof and sides on the "Kubota Toybox" next year. Connecting SSQA implements- super easy from elevted platforms

Don't under-estimate a rear blade that can swing and angle.

Found my LP SA20 auger at a Kubota dealer that also sells construction equipment. Has the medium flow motor, it's slow (way faster than hand digging), never had to drill new hole because of striking tree root. FEL has enough weight to use float for down pressure. When tractor starts to rock...

If buying 2nd hand implements, farm auction stuff, ect. Most implements just need minor mods to make them work with QH. Really helps if you know a welder. https://www.orangetractortalks.com/forums/threads/ideas-to-make-implements-qh-compatible.46448/

LandPride sgc 0660 has a strong grip 26hp Kubota B series

thinking about one of these for on saw sharpening https://timberlinesharpener.com/

Have an APC 1500VA UPS on a pellet stove. When the power fails it starts beeping, have 10-15 minutes to get a Honda 1000w inverter generator out, running and plugged into stove. The APC UPS produces a modified sine wave (stair stepped) and the AC motors growl as they try to speed up and slow...

Recently purchased a Power King and pleased with it. https://www.logsplittersdirect.com/Power-King-PK0342-Log-Splitter/p97062.html Built a "bucking" table to go with it. https://www.orangetractortalks.com/forums/threads/processing-firewood-the-professional-redneck-way.57673/

Cab for head, when you can't add cab to tractor https://www.amazon.com/TREND-AIR-PRO-Airshield-Faceshield/dp/B002Q0Y5IU

It's called a beaver blade https://www.drpower.com/Power-Equipment/Trimmer-Mowers/Trimmer-Mower-Accessories/Blades/12%22-Replacement-Beaver-Blade/p/A0000146148

Pretty sure OSHA killed it. Toru once made a 2 cycle push mower that had a disk with 4 sickle bar points for the blades. You could push the handle down to angle mower deck and walk thru waist height weeds.

Recommend a drawbar implement, stays on the ground as tractor bounces over ruts. Old fashion disk would smooth out plowed fields (old school farming tools) some newer fancier stuff http://www.hoelscherinc.com/indexdirt.htm

Since no one else mentioned it, a power washer. Went to gravel pit where they had a fire hose/water cannon at their washout bay, fun to use

I used concrete filler, no annual fill/empty hassels. Add an automotive style coupler and a 3pt trailer mover.

assembly instruction & photos

I just shear them off

Check Menards, approx same price, has lifting loop on top of machine - useful with boom pole or lifting hooks on bucket. Best part it's not HF

Have several routers, the 3 Hp router is best used with a table & lift kit. None of the big box stores tables on display seemed very sturdy to me. Kreg (the pocket jig company) sells a $10 dvd with plans (using pocket screws, of course) to build a plywood table. Used cedar on my drawer fronts.

Have an electric 2,000psi unit that says snapon on the front, really more trouble than it's worth for small jobs. I purchased a 20v DeWalt washer about 500psi only needs water hose. Also comes with a siphon hose you can drop into 5gal bucket. Heavier than a PW spray nozzle since your holding...

NOPE, no welding skills

tractor recovery when a wrecker can't access the area (ex. dumping fill into ravine, front wheels sink into soft surface and bucket is hanging over ravine) Tractors can go places where recovery vehicle can't. Once drove over hill to deliver stuff in bucket. 2wd ford using diff lock & bucket...

3 good uses are: 1. tractor won't run, it can winch itself onto a trailer 2. tight spaces, tractor can winch something on trailer, deliver trailer to tow vehicle 3. tractor recovery when a wrecker can't access the area (ex. dumping fill into ravine, front wheels sink into soft surface and bucket...

top links with check valves have a hose connection block that can be rotated to the left or right https://www.agristoreusa.com/collections/category-1-hydraulic-top-links/products/category-1-hydraulic-top-link-18-1-8-26-3-8

QH won't require longer toplink, longer pto shaft maybe

Measure your current top link both retracted and extended. Try to find cylinder that comes closest to these measurements. Cat 1 top link pins are 3/4". Fittings and hose lengths depend on what cylinder and hydraulic couplers need. Since you want to be able to make small adjustments 1/4" hoses or...

This one doesn't make/use electricity https://www.bitchute.com/video/3vILtoaWFQU/

If the ground is that soft, it's a good time to roll it

Is there a small lever on the side of the transmission? If so it switches 3pt between draft and positional control. The problem you describe sounds like it's in daft control now.

rachet straps, bungie cords, hand tools, wire cutters if using mower deck

https://www.youtube.com/results?search_query=40+Incredible+Road+Moments+Caught+on+Camera

https://www.orangetractortalks.com/forums/threads/found-new-job-for-root-grapple.46710/

Aluminum tank is 2x the cost, doesn't rust and is extremely light when filled https://www.harborfreight.com/air-tools-compressors/air-compressors-tanks/portable-air-tanks/7-gallon-aluminum-air-tank-94801.html

If you like unusual engines look at Duke http://www.dukeengines.com/

I'd recommend some thing like this -- pointed edges https://www.rei.com/product/806475/yaktrax-icetrekkers-diamond-grip-traction-system

The bracket clamps onto the female's locking ring making it a break away connection. you have to pull the tractor hose reward to plug in the male coupler.

Sorry, must disagree. Sodium chloride also known as table salt is the cheapest and way less corrosive than Calcium. Salt good to about 17 degrees, magnesium blends -20 to -25, calcium down to -40. Calcium draws moisture from the air and controls dust by keeping it damp.

2 of these with covered storage in the middle would make an awesome barn or storage shed https://www.azteccontainer.com/storage-container-40ft-full-side-open/

https://www.amazon.com/MixKwik-MT16-Tool/dp/B0055S7DJS/ref=sr_1_4?crid=1CNODQJLM3ZGN&keywords=paint+can+shaker&qid=1641764923&sprefix=paint+can+shaker%2Caps%2C661&sr=8-4 When you don't want to look silly

Get one designed for salt. Went cheap, got a dry material spreader. Had to add top to keep salt in hopper. Added cat food bags to sides to keep salt in drive . Have to use blower or compressed air to remove the excess after using. Every 2-3 years, dismantle, remove rust and blistered paint...

https://www.orangetractortalks.com/forums/threads/daily-chuckle.19013/

Is it just me or does deer season keep getting longer?

or controlled by another switch in house?

All relays have a power terminal and a load terminal. if the 3rd terminal has power (hot) then it has to be grounded to work. Personally I'd use a 4 or 5 terminal relay

If it looks like this Tuff Stuff 7629-1 Hot Start Starter Solenoid, Universal Ford{match_type}&utm_source=bing&utm_medium=cpc&utm_campaign=SMI%20-%20Shopping%20(CSE)%20(Bing)&utm_term=4577404346894511&utm_content=All%20Products%20(Feb28_2020) the wire from the "I" terminal will go to the...

https://www.amazon.com/GOLDENROD-496-3-WATER-BLOCK-FILTER-Filter/dp/B0000AXE6C I use the goldenrod waterblock filter, drain on the bottom, if algae starts to grow - early warning to add algaecide.

Hey, have you heard about the latest anonymous sperm bank being established by the State of Indiana? It will be called "Hoosier Daddy!"

2nd that

Pretty nice neighborhood for a redneck

The drum holds 109 gal, when I bought it diesel was 4.50, cheap hydro 5.00. Didn't know if drum ever had water in it, oil seemed like a good idea. Yes, if the lawn needs mowed and more rain is in forecast, why not.

Here's a simple 1 cylinder diesel with 4 moving parts piston, rod crankshaft and throttle https://www.bing.com/videos/search?q=rc+diesel+engine+conversion&docid=608047556894015877&mid=872FE12FBCAA279B754A872FE12FBCAA279B754A&view=detail&FORM=VIRE

It's the 6 footer, depends on job, can pull it with BX, B or ford 4000. Has 40 gal of hydro oil in drum as rust retardant. Some wet early springs I pop BX into 4wd and mow thru standing water, yes it makes ruts. 3-5 days later I can roll lawn. When I use it neighbors get their 2wd turf tired...

Old enough to remember dialing a phone number just to find out the time.

The Reverend Francis Norton woke up Sunday morning and realizing it was an exceptionally beautiful and sunny early spring day, decided he just had to play golf. So... he told the Associate Pastor that he was feeling sick and convinced him to say Mass for him that day. As soon as the Associate...

http://www.hoelscherinc.com/prod_rbscraper.htm

Running over lawn in 4wd can rut up lawn worse than loaded tires. The cure for lawn ruts

No, gravity feed engines don't need it. A low mounted tank uses a lift pump to get fuel to the injection (high pressure) pump. The low pressure return helps to purge air from fuel lines. Truckers in the winter will run a high idle so the warmer return fuel helps to prevent fuel gelling. Diesels...

A man was watching TV and enjoying a beer. "Don't go," he yelled at the screen. "Do not enter that building. Walk away. Argh, you stupid man!" His wife called from the kitchen, "What on earth are you watching?" "Our wedding video."

A man went to his lawyer and said "I would like to make a will but I don't know exactly how to go about it." The lawyer says "No problem, leave it all to me". The man looks somewhat upset ... "Well I knew you were going to take the biggest slice, but I'd like to leave a little to my children too!

Interesting, I always thought it was "Alice, pull my finger"

Modern day tractors are two light duty, needing additional iron (sub frames) to handle backhoe. tractors in the 50's - 70's didn't have sub frame hoes. I have a ford4000 with extendable lift arms for my 1200# backhoe. Somtimes you can connect it in 15 min. next time almost an hour. Several tube...

Sometimes an implement striking objects behind you can distract you in dangerous operations/situations

How to mess up your children