Search results

I enjoyed the trees up until I didn't. Most of the oaks around here are just old water oaks which is what most of these were. There were some white oaks sprinkled in. I just think I was short sighted by not removing the ones that needed to be when I had the chance to cut them down. Heck, I have...

Yes. I made a valiant attempt to save all of the oak trees around my house. Oaks shed tons of leaves which aren't very good on the roofing. They also drop tons of limbs which aren't very good on the roof. But the roots are the worse. They will tear up foundations. The limbs on my trees also...

I've learned my lesson about building permanent structures under "beautiful" oak trees. What a mistake.

I just made flat face to Pioneer changeover hoses about a foot long. I needed the extra length anyway. Since I did that I've bough two other implements that are FF.

Should be a wire on it. Pull the wire off and see if it blows the fuse. JDs are bad about the cold start thermistor going bad and it is wired into the FSO circuit.

Yea, typically they are part of the injector pump.

Sounds like maybe a shorted coil on the fuel shutoff but it could be a number of things. Not much info to go on.

I use one of these. I have one in my shop by the sink, one by the well pump and several in the house. They have large top openings that make drinking easy and I refill them from the sink or hose.

I really like my 1211. I looked at the Ferris diesel but the 1211 was a good bit less than half the Ferris price. That's as easy as picking Charles Barkley for your pickup basketball team.

On mine the brake disengages when the tractor is off. It's engaged when the PTO is off and the tractor is running.

Does it do it loaded and unloaded?

I'm guessing you bent those pushing material backward. The ones on my Hardee are bent like that and it had nothing to do with the sway bars. I adjust my sway bars so there's just a bit of side to side so I don't bind things up. One thing you could do after you get things straight is get some...

I have 3. Couldn't agree more. The 1066, 656 and 454 were the ones that were dominant in our area. A few farmers had 1466s. I have 3 140s.

Interesting voltage. I've never heard of 408 3 phase. My thoughts on the tractor driven gen is that if I'm outside cleaning up hurricane damage, I don't need to be running the gen. That's why I have a 25kW to run my whole house. Very cheap and no additional fuel. As far as the transfer switch...

Yea, when I saw that it was the first thing that popped in my head and then I read the thread.

When I shoot game birds or even deer with a shotgun I don't close an eye. My grand dad and dad taught me to shoot with both eyes open and just cover the target. Always seems to work.

You shoot depending on your eye dominance. I'm left eye dominant so I shoot left handed. I'm ambidextrous with pistols and many other things. I can write with either hand. But shooting is lefty. All of my guns that I use are left handed. Ordered or bought that way. Buy I can shoot any right...

I never knew Dickey and Cher were a thing. I know Greg married Cher but never knew about Dick.

Ah man. I hate that.

Texas is not a good place to be a rabbit I guess.

Is it rabbit season in Texas? I've never heard of rabbit hunting this time of year.

I put nitrogen to my corn yesterday. Still have one corn variety I want to plant. All the beans and peas are in the ground and coming up. Potatoes are up. Tomatoes, cabbage and broccoli are set. Turnips are planted but don't look like they are coming up. Pouring rain this morning.

How in the world do you find the time to do all the things you are involved in on a daily basis? I had no idea you fabbed custom parts for motorcycles and now I find out you drive trucks too. I had a class 3 CDL which is the same thing as that class 8 I think. I had all 8 endorsements. That...

So that makes it right? People that can't afford to pay their CC bill end up paying for Joe Shmoo's grapple from EA. That's my point.

I guess I'm lucky I'm not dead. I've been filling gas cans in the bed of my truck for over 50 years. I have NEVER heard of a static explosion with diesel nor have I ever seen the delivery guy run a static ground strap when he delivers my diesel. I've seen them run the ground strap on gas...

It was a sketchy purchase. Just because you didn't get bagged doesn't change the fact that you got taken advantage of by loaning Ted money and could have just as easily been a victim. You make a stupid purchase based on the premise that the CC company will refund your money if you get screwed...

Most people use a CC because they don't have the money to buy what they are purchasing. Otherwise CC companies wouldn't be in business. I'm pretty sure I haven't made an ignorant statement about EA or Ted. You on the other hand totally miss the point of the conversation. When you bought...

LOL. Your reasoning and mine are polar opposite. So you believe that it's okay for someone to make a sketchy purchase for the sole reason that the CC company will take the hit for them? 🫣 Oh, and your reasoning is simply because they can afford it. SMH

The end game for me was to limit or eliminate the times I mount and dismount the tractor. I had to modify any of my stuff that didn't fit and make a hydraulic setup to operate the release levers on the QH. Now unless I'm attaching something with a PTO I never have to get out of the cab. That's...

So are you saying you can't get a better tire that fits those rims? Are the tires on my 1211 the same size as yours? You answered this in your last post. LOL

Any company that works on the premise of you pay us for it and then we will order the materials to build it and build it is obviously robbing Peter to pay Paul. When I was an HVAC contractor I was victim of that on several occasions. Anyone buying something from EA should have recognized that...

I'm sure you are correct.

I can't dispute anything about EA's attachments, I don't own any. But what I will say is that I bet my attachments are as good or better than EA. EA wasn't the end all, do all in tractor implements. We'll all get along just fine without them. I do hate so many people got snookered by a crook but...

What do you need another set for?

If it's not that then the clutch apparently went out.

I had a 283 years ago. I'm assuming it's the same tractor. You didn't happen to knock the range lever in neutral? That geared tractor should go. Have you tried all the gears in both ranges?

Oh! Gotcha. Yea. It's funny how something you say will trigger them.

Why does that sound so familiar? Meaning?

It must be an older machine. I don't know of anyone that still makes a four stick machine. Imagine being used to using a four stick machine and getting a two stick. That was a happy day.

Nope. My limit for handing over money to someone prior to what I'm buying shipping is a few hundred dollars at best and I would not buy something with the kind of lead times I have seen from them. Personally, I work too hard for my money to take a hit like some of EA's customers did. I have no...

You are obviously not aware of some of the things that were going on on other media sites. There were loyalists that were downright nasty to anyone that didn't agree EA was the best thing to arrive on the implement scene. They would have and probably would still follow Ted into quicksand and...

Yea, I've never seen a place with such a cult following as that place had. If Ted flew in without getting his cape wrapped around his neck I do believe most of these drones would fall right back in his wake without any reservations.

I'm surprised they aren't drilled for a through bolt. You could always wrap a bungee around them. They appear to be pretty tight though.

That's pretty slick. My property couldn't be any flatter than it is so weights and fluid filled tires are not a thing for me.

Kubota 10, 12, 15 and 16 series don't have wheel motors. They have full blown transaxles. Not sure about their other models. It's one of the reasons why I like them and bought a 1211. That said, after running it I can't tell the difference in the transaxle and the motor driven mowers. I still...

I've been all through my 25 kW Winco and never seen a diode. Mine is about 30 years old I would say. If you are spinning it and it's not producing voltage there maybe a bad connection, the gen may be bad or it may just need to be excited with a 6 or 12 volt battery at startup.

We have all four species of venomous snakes here in SC. In the rattlesnake family most of ours are diamond backs. Probably the largest population of Copperheads and Cottonmouths than anything.

I wish that one was closer to me.

You want to get good hooks too.

Does EA owe you a piece of equipment?

Also, you don't need multiple threads for the same thing.

There's a dude on here from Summit all the time pushing their wares. Hit him up.

I do use draft control on any implement I'm trying to level something with. The thing I don't use is a box blade for what you are trying to do. I use a landplane that I made. For me, a box is good for moving material around but not nearly as good for leveling. My LP doesn't have tines so when I...

That's what I just finished putting 8' fence around. The plan is to start selling some stuff when I quit work but for now the plan is to give away what we don't need.

How much land are you talking about and what will the crop(s) be? Sharecropping used to be a thing around here when tobacco was our big cash crop. Nowadays we just rent/lease the land for row cropping. I can tell you this, if I were the farmer the land owner would get his % after bills were...

I've been wanting one for a while now. I keep seeing used ones on the equipment sales around here but haven't spotted one that I liked.

Yep, I have Halo cameras and monitor. I like the rear facing camera but I wouldn't ever take my mirrors off. I don't have much trouble with mine getting knocked around so I use the mirrors for spots I can't see with the cameras.

I live on 110 acres of farm land my dad and I bought in 1980 in South Carolina and I own all of now. I built my house in 1996 to 1998. Cut the trees of the place and sawed the lumber for the house. I have a large farmer friend that farms the row crop on about 30 acres of it. 4 acres I just...

Very true. Thieves don't work. If they did they wouldn't be stealing. I've said it a hundred times, it will be a bad day for a thief that I catch stealing something from me. I absolutely despise a thief.

s far as the lawsuit, I really don't have an opinion other than I think it's just a means to an end. They are going to have to end up in another conference somewhere. Why not the B1G.

I think he was talking about that gang disc.

Nice machine HD. Hopefully it's trouble free for several years. Show us the controls on it when you get a chance.

Batwings don't need float. At least not the 100 or so different ones that I've hooked up. Most of them only have a one way hydraulic cylinder to raise the deck and gravity down.

I'm open minded about it but when I think of it I too think of turpentine.

What's the weight limit on those Pats or euro hooks? They do look to be not very robust. Heck if I were going to use those I would just use my extendable draft links. They are just as easy as either of the two and much, much more robust. Kinda funny about the PTO links. I have no issues hooking...

😵‍💫:ROFLMAO::ROFLMAO: You are a hoot.

I had a horse years ago that came really close to eating her stall down. They love that glue in plywood and OSB. I tried all sorts of mineral blocks and additives but she preferred wood.

This is a debate that I guess will always be well....a debate. I just don't understand how having to interact with an implement while connecting is "much nicer than a QH thinks to be". Reaching back to pull a rope or string or align something is not an option for me with a cab. Also, with a QH...

Chapter 7 is a reset I believe. Chapter 11 is a restructure. I think I have those correct.

No real advantage there that I can see. You still have to get off the tractor to hook it up only now you may have to get off twice. Certainly not an option using a QH.

If you start checking on these shingle companies they will just change their name after so many years. Even the big ones like Owens Corning.

Shingle manufacturers have been pulling that stunt for years. A 25 or 30 year shingle is laughable. There's not a shingle company that's ever been around long enough to make good on very many warranty issues.

Just curious how this measures the remaining volume or level in a tank?

They are amazing. The tech has gotten 10 fold better in the last 10 years. I do the same things, hear something that I don't know what it is only to find out it is some everyday noise that I haven't heard in 30 years.

What kind of tires are you guys running? I'm guessing industrial or turf tires. I run ag tires and have zero issues with the mashing grass down.

I have one of those that I use on the back of my Ranger. It's a symmetrical tank so 1/2 level mark is easy as is the two 1/4 tank marks. That should be enough resolution for pretty much anything you are spraying. I just use mine for 2,4D/atrazine and Roundup/2,4D/atrazine. Mine sprays ~3.1 acres...

I have Phonaks and absolutely love them. Best aids I've ever had. I have very significant loss with completely different Hz loss in each ear. These hearing aids make hearing like I could 30 years ago. I can't use the rechargables so the biggest con for me is battery life. These things eat...

It will probably be really good if you get lots and lots of sugar in it and come up with something to get that pine taste out of it.

When you need the AC or heat does it matter? :ROFLMAO: :ROFLMAO:

For me it has plenty of power. I just think for you with a 72" deck and cutting grass on a more commercial level you will be disappointed. That said, I do have a mulching kit on mine which robs some HP. It would be really nice if you could run one and see how it performs for you. Too bad you...

I personally don't think you will like the 1211. I have a 60" deck on mine and wouldn't want the 72". @browndog on here got rid of 2 1211s and got the 1511s.

Cool product but an expensive solution. I've seen some reviews on them and the guys that have them really like the system.

Sorry, I couldn't help myself.

Is Debaiting like taking the minnow off of your hook when you're done fishing?

Everywhere I go I see Ohio State bumper stickers. As you can imagine we really don't care for Ohio State in SC.

I replaced mine with a Baileigh. I really like it. I bought a cheap one but they have some really nice presses. Mine is variable with 5/8" chuck. I think it was around $1500 at the time.

All of Ohio seems to be moving to SC.

Pramitol. I use it in my ditches mixed with Roundup and 2,4 D. It's a soil sterilizer.

I'll have to take the word of all of you that know and think FD is the best thing since sliced bread. I won't be paying for one. Sure would like to try something freeze dried and see.

This thread started 3 days after Christmas. I had already heard about it by then, yet you ORDERED something on 1/22/24? Man if you haven't filed with your CC company you need to right now and hope like hell it's not too late. You will NOT be getting any merchandise from EA. They do not have your...

How much fertilizer do you use? We talking tons or a few hundred pounds?

All the parts houses around here make hoses. As far as remotes, I have 3, using all 3 right now. I always have my toplink on one, the other 2 are hooked up to my right and left booms on my sprayer. I have zero use for a tilt on my 3 PH otherwise I would need 4.

Hearing aids last until the technology runs out for me. The difference between my last pair and this pair was vastly different. These are so much better in terms of amplification and clarity. The Bluetooth technology has gotten so much better also. I typically use a set about 5 years but have...

Sounds like a similar path we went down with my Dad. Our Hospice experience was excellent. I sure do miss being able to ask him how to do things. He was an uneducated genius.

I have vastly different freq loss in each ear. has need to be tuned for this. I've never used Costco and probably never will. I get my Phonaks from a hearing center near me. Last pair was around 3K. They are truly amazing and I couldn't function in the real world without them.

It's been a few years since our kitchen remodel. Cabinets and floors are obviously the focal point of the kitchen build. After having worked at a cabinet manufacturing facility in the 80s I knew I didn't want anything to do with any kind of pre-manufactured cabinet. The first time around I...

Have y'all seen these tracked robot mowers? I saw one at the JD dealer the other day.

You guys must be psychic. I thought he was talking about a 5 foot landscape yard worker. Who knew?

I cultivate with one of these. 800930

A tiller is something that goes behind my tractor. I've done my fair share of wrestling a TB tiller and unless fortunes really turn on me I will never walk behind a tiller again.

:ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO:

I can't hear you Fuddy. :ROFLMAO: :ROFLMAO: :ROFLMAO:

It's a tiller, not a bottom plow. If you want something better than what you have you need to buy something different. That looks pretty good if you ask me. Except those ditches you dug when you dropped the tiller. You need to learn to roll the tractor and lower the tiller at the same time. I...

We do try but it's hard sometimes. Congrats on your latest acquisition. I must admit, I'm a bit envious. I really like those tractors.

I'll be curious to know how that blue cap eraser works out. When the day comes I have issues with mine that's going to happen.

Whatever you say. We've used straight gas for forestry burns for as long as I can remember.

I want to do that on my loader and on my QH.

What type of hookup is it? Global? Tell us something about what you are doing and what that kit is. I can't read that booklet.

What is that wired remote for? Controlling the 3rd function? Never seen anything like that setup before. I couldn't use a separate control like that for mine. It would have to be a button on the joy stick.

I've been looking around here. I don't see much in the way of used grapples in my area of SC. How big do you want?

What is this push mower you speak of?

What's wrong with that ratio? Better to put it to use than throw it away.

Burn pile.

Now you're thinking. See, now you have to go buy a tractor to pull your new chisel plow. You need at least 100 HP. I pull a 7 point that has longer shanks with my 100 HP and it's all it wants. You don't have anything listed up there that can even touch that thing.

Is removing your drawbar difficult? Why even take a chance. You should always remove the drawbar when you are running a PTO shaft. My drawbar comes out with one captive pin. Takes all of 10 seconds.

Maybe buy one with JDQA and change it over. I have a bucket grapple on my tractor so that and the forks are all I have and need. When I bought the SS PHD I bought the adapter plate for it.

How deep do you need to dig?

The top of a global attachment is similar to JDQA, a round solid piece probably 1.5 to 2" running across the loader frame. There are guides where the implement hooks catch the round receiver to help alignment. The implements have two very beefy hooks that hook on round catch on each side of the...

I hope you've scheduled vacation so you can keep up with this thread.

I'm not sure you have noticed this yet but there's not a soul talking tech with you and as far as the adult comment, I think you are a bit skewed on that Looks like the rest of us are the adults in the room. Not sure what you refer to as a fanboy in this particular case. I'm not a fanboy of...

You are an ADHD conspiracy theorist. You remind me of that little dog that used to run around Spike and want his attention in the cartoons.

No. They are nothing like those two woods. The wood burns hot and generates a ton of coals. They will get pretty large but like Lineman says they have shallow roots so when they get big usually wet and a good wind will blow them over. That's when they turn into pork.

Nope, a rat. People run like a school girl from a rat.

They are similar to a Live Oak. Most of the oaks we have in the Pee Dee area of SC are water oaks. I use the wood from them to BBQ hogs.

Typically it's just the shaft and the JD units we had you pulled the shaft and turned it around. One way was 540 the other was 1000. Personally if it were me I would get an adapter for the 1000 RPM spline the 540 and run my mowers on the 1000 at a lower engine RPM. You may have to use some sort...

That's pretty sweet.

Probably not beyond repairing the hydraulic lines that broke. I've never felt comfortable with that SS attach. I can see how that can easily happen. You would never see the global attach do that.

The most important question is what does the guy want for it?

Yea, I was just wondering what the name was. There are several varieties now, the bet one being Obsession II. At least the ones I've heard about..

What is the roundup ready corn you are planting?

It hurts to sleep.

I don't think you will build one like the one in that video for less than 5K.

You can buy those things for less than 5K on the farm auctions around here. New, probably China. I was at a sale a week ago and I bet they had a dozen of them.

You can only get Leaf Filter from Eddie Munster. :ROFLMAO: :ROFLMAO:

That guy that owns Leaf Filter, Matt Kaulig.

A good hurricane will handle them for you. They always fall on your house.

That dude looks like Eddie Munster and zero personality, even less acting ability. That alone knocks me out but I've heard those things are really expensive and I just can't see why that would be.

I also wouldn't have my lift in a drive through configuration like you have drawn. The wall in front of your vehicle is where the tool boxes and work bench need to go.

I personally think it takes a shop bigger than 40 x 60 to have a 4 and a 2 post lift. But then I think everyone needs a 80 x 100 shop anyway. I have a 30 x 50 shop and a 40 x 60 equipment building and they are both way too small.

I've never touched mine other than installing the mulch kit on it. I don't have scalp issues with it. I love the deck adjustment and the pedal deck lift. but the mulching capability is the thing it does the best.

I've had bluetooth aids for 10 years or so. Of course the latest set is the most advanced both in sound quality and technology.

Where is the Heart of Dixie? You must be my neighbor. Welcome.

I have never tried them. I've always been told that the Phonaks would get 8 to 12 hours from a charge and that's just not a chance I can take. At home that would be fine but not when I'm working. I do use mine all the time for the phone and TV. That really eats battery life. I spend maybe $15 a...

Nice mower. I really like the deck raise and lower pedals. I also like the pivoting front end and the built in jack. JD mowers have none of the above.

BTW, if you have a loader on the tractor you don't even have to get the jack out.

Exactly what I do. Works every time.

You can opt for that type of insurance on any hearing aids. I have that on mine. I would obviously have to see and try the Jabra aids to determine their level of technology. When I was fitted for my latest pair there was an issue that the audiologist was not comfortable with so she referred me...

I would never purchase OTCs for 2 grand whan you can get Sharkey or Phonak for 3 grand from a hearing specialist. My Phonak's have changed my life. I can't be productive without them. No way I could still be working without them. I've never run across an OTC that came anywhere close to my Phonaks.

It's part of selling products months before you can deliver them. It's just a bad business model.

I just can't get my head around that type of behavior. I know there are 3 sides to every story and I try to take that into account. I'm just not wired like your siblings nor is my sister thank goodness. I can't help but detect a bit of selfishness and greed in what you say about them.

Maybe in their mind they think your going against their superior judgement to move her to a facility and keep her at home was a ploy for you to get sole ownership of her estate.

Is this a democracy? Or is it your decision? Your opinion is worth as much as theirs but if it's a democracy and they agree then you're screwed.

You can still order and pay for a grapple from EA. Their website was up and running unless it's been shutdown in the last few days.

You should have gotten your mom to change the will back when they didn't want to help take care of her. I think now you are backed in a corner. I'm thankful every day that I have the sister I do. We never crossed words over what was left and how to split it up.

All of the asphalt driveways around here just don't hold up. I have asphalt now. It probably needs to be resurfaced or something done but I'm just not going to put anymore money in temporary fixes.

One of the very first things I did with mine was bog it down to the frame. I had to get my buddy and his 8 series to come pull me out.

Cell phones are a vice for the majority of the people that have them plain and simple. Admittedly, it is a very useful tool in my business but I'm most certain we could come up with a way around it if need be. I ran a business full time before we had cell phones. I didn't get one until 1989 or...

Ah, the weekend warriors. He would curl up in a corner if he saw my tractor right now.

I have asphalt now. Would never pay for it again. We are about to concrete our 1000 feet.

How did you get it apart if the wire was short enough?

I wish they would all go down and not come back. Nothing more annoying than an Apple cell phone.

Inventory???? All the fanboys on this thread said EA was a "custom" or "build to order" company. There should be no inventory in that case.

They got Possum Helper too?

If you don't read those threads you might miss something. I think blocking threads is counterintuitive to what a forum is here for.

EA/Ted fanboys will support him and his actions to the bitter end, which will very likely be a concrete cell. It just amazes me the different ways they have come up with to condone his actions.

Ted's in a pickle and a bunch of customers are out a lot of money. Amazingly their website is still up and running. It appears one could still place an order, I don't know that for sure but it looks that way. But....they sure do make the best tractor implements.

No, don't adjust them. You have a pre-saved program and you just switch to that when you get in the truck or noisy situation.

Sig, you can adjust them so that you block out most of the background noise. There are preset programs that will do that as well. I think the restaurant program is one of them.

If you have a box blade you might be able to knock it down with that.

But....he makes some top quality tractor implements.

The worse that happened is you bought from Vevor. It's a stolen knockoff of something designed in the US and built with child labor.

I've thought the same thing about the 331s that I have seen. They are much beefier than my 1211.

I have a 1211. I think the 1511 replaced the 331. The 1211 is 24.9 HP which means no emissions stuff. The 1511 has a DPF. Not real sure about the 326. It's over 25HP so I'm not sure what it's deal is. I really like my 1211.

Tractor Porno

Nice adaptation.

I really like the Italian and other European flails. I have a Maschio 10' flail.

I would find it hard to believe that anyone is buying that land for farming. Maybe add-on property for protection from developing but if that's the case they would have to have deep pockets.

Is that the deck you use for cutting grass? I don't see the gear box for the blade drive.

Trouble has been brewing since they started taking orders for delivery 6 months out.

I completely understand that and agree with it for the most part. I just fail to see how a speed multiplier is any different from EPTO form a tiller and HP perspective. Very, very seldom do we need our full PTO HP. I pull a 21' Frontier FM and a 10' Maschio flail mower in EPTO and notice no HP...

I'm just curious, what is the difference in a speed multiplier and EPTO? From a tiller perspective? I understand fooling with the belts is probably not a good idea. I never take my tractor out of EPTO no matter which implement I have attached, including my tiller.

I searched their website and I don't see anything regarding "made to order" or "custom". I could have missed it. I don't think this is the intent of their business. I believe they intend to have a stock of the high volume implements on hand but because of their recent business model that has...

They didn't handcraft things specifically for anyone. they made the same item for anyone who ordered it. The reason it was "handcrafted specifically for you" is because they were 6 months behind on manufacturing and when an item was made it shipped out to the customer. If you can do that and get...

I would speculate that there are very, very few $5K items that you or anyone else orders and pays up front for. Most everything I order charges my card when it ships. And by the way, I don't think Ted made custom implements. So if someone reneged, next man up. Ted's downfall was that he had...

These companies running these Ponzi schemes typically don't go south at this point in their game. His business was gang busters. Most times they make it on down the road quite a ways before things finally catch up to them. The new building debacle is what brought ole Ted down. Make no mistake...

I'm not familiar with Landpride cutters. I know the Rhino's are good. I've owned one of them. I'm still in the camp of looking at the JD. That's what all the commercial guys here in SC pull for highway maintenance.

I personally thing that on flat land like that you will be fine with the 15 FT batwing. I do agree with HD that I would buy the JD instead of the LP. I saw 2 of those sell on the farm eq auction I was at yesterday. They brought 5 grand each. In fairly good condition.

The other question would be does that tractor have the economy PTO option and do you plan on using it? I pull a 21' Frontier finish mower with mine and run it in EPTO. My tractor stays in EPTO all the time. I pulled that same mower with my old 5310(55HP) prior to this tractor and in EPTO as well.

I have magnetic, wireless cameras. Attach one to the brush guard on the tractor and I can see everything.

I challenge anyone to attempt to manufacture pretty much anything with 100% sourced US made products. At best it's very difficult at worse it's impossible. I would venture to say that some of EA's implements had foreign made components on them. Be it hydraulic hoses, fittings, pins, grease...

Small is 2 kW. I bought it to run power tools for working remotely on the farm. I have a 25 kW PTO gen that I could use if I need to. The 2 kW should run it. It will run off of a 20 amp circuit just fine. I'm not at home to test run the compressor right now but that's obviously how that will go...

The pneumatic wouldn't be too bad but I don't know if my little gen will run my little compressor.

It's dead flat land. Only 4 rolls of wire. I think the longest single pulls are 2 of about 270 feet. The wire will be here Monday. I have a way to unroll it upright I'm thinking about using some Tposts to sandwich the wire between it and the wood posts and hold it upright. I sure as heck hope I...

Maybe he did and the refund was denied. I'm sure the CC companies have gotten wise to the EA debacle. I still don't get why this is bashing EA when they chose to run their business in the ground paying forward. If that weren't bad enough they still made it possible to place an order on an item...

I'm sure EA was a pimple on the butt of tractor implement sales. Losing them will not be an economic factor.

Maybe he is one of the unlucky ones that what was EA is holding(spent) his money.

I am about to put up some 8' fixed knot field fence. I've done a lot of things and even a bit of fencing back when I was young and had horses but it's been a while. I have all of my gates, corners and H sections up and ready for the fencing. I will have to come back and install some 10' T posts...

I think the dead horse that's being beaten is this redundant thread. I believe what you are interested in is if the fat lady has sung or not. If she hasn't, she is damn sure warming up.

The guy that cuts my yard for me some when I'm traveling for work has one along with a Dixie Chopper. The BB is a decent enough looking mower but he says he likes the Chopper hands down over the BB. Neither are diesel so they would be a no go for me. I like my ZD1211.

I live about 30 mins from Shaw. Tell him if he ever misses the farm life he's welcome to come by. I can find something for him to do. LOL.