Search results

I’ll have to take a look. I think the wire I found on the front left (if you’re in the seat) might be for a 3rd function power? Not quite sure. Maybe I’ll just go to basic rocket switches and ditch the 6 panel switch.

CK2610. I have the factory bullet connectors but I need a hot wire to plug the switch panel accessory wire into that’s keyed. Maybe I need to ditch the 6 panel switch but thought it would be nice.

I was recycling some old parts pods I never got around to installing on my SxS and light bars that I have since upgraded. I was digging around for a hot wire to tap into for the accessory for my fuse panel. And I found this wire on the front left side (if you’re sitting in the seat). Anyone...

THANK YOU. I truly appreciate the help!

I’ve made a few posts about getting my fluid and filters changed and received a ton of help, so thank you kind internet strangers. Well now I’m finally ready to put the tractor to work and unfortunately I have to fold the ROPs down to fit into our garage. I bought it from a gentleman, not a...

Yeah, mostly like bucket work, leveling a few spots off for IBC totes. I only have a bucket and forks so far, so no tiller or anything else. Strictly bucket to level some ground and store IBC totes of firewood

KIOTI Ck2610 - doing dirt work and lifting ibc totes of wood, what type of RPMs should I be looking at?

I'm In South Western PA, so pretty neutral climate, no major winters or scorching hot summers.. After looking at the API rating and temperature charts, I think I'm good. Only confusion is the manual I have says "Engine Oil: tier 2 or 3 - API CH grade or above Tier 4 API CJ grade above. Oil...

Ahh that was my thought process, maybe I just bite the bullet and dump it on a portion of the driveway with a tarp.

Much appreciated! I was worried after reading the book I may have gotten the wrong oil. I truly appreciate all of the advice and knowledge! thank you, hopefully this thread can help other new tractor owners in the future! Yupp, I keep the used oil for fire starter around the property.

Thank you so much! Primed the fuel filter and she fired up! Any chance you know if that oil I used is within spec? Or do I need to dump it?

Think that’s an Amazon link or at least that’s what I’m getting. But looks like open the vent a bit and pump, close vent and pump.

Never worked on a diesel mostly just my lawn mower and small stuff. How many times do I need to push the primer? Can I overdo it?

Alright, finally performed the service this weekend and now she won't start up... Please help a very not mechanically inclined guy out.. Is the oil the wrong kind and if so, did I just nuke my engine or can I simply drain and refill with correct oil? I changed the engine oil + filter, air...

Noobie here, literally have maybe 1-2 hours on our new to us tractor. We've had a dump trailer for hauling stone, firewood, mulch, etc. but we need to replenish some of our landscaping stone around the house. We have black granite, so it's a bit bigger than your normal 3/4" rock. What's my best...

No luck around here. 2 auto zones and a Napa. Maybe those aren’t the best places to look?

Where do you find this? I couldn’t find the rating in my manual.

I couldn’t find any Mobil 424 fluid. Picked this up but feel like it’s not good for the hydraulics. I know they don’t need changed but I just wanted to change all the fluid and filters. https://www.lucasoil.com/pdf/10_Hydraulics_Universal%20Hydraulic%20Transmission%20Fluid_PDS.pdf

Thanks everyone! I got filters coming in tomorrow and I'll be picking up the following: SAE 15W-40 Rotella T5 - Engine Oil Mobil 424 Hydraulic Fluid - Hydraulic system SAE 80W-90 Gear Oil - Front Axle 3-4 tubes of Red n Tacky for greasing the loader. Anything else I'm missing?

Hi, I made a post about purchasing a 2610 and we finally agreed upon a price and brought it home this past weekend. Any good recommendations for fluids? I wanted to change all of the filters and fluids to start off on the right foot. It has about 106 hours and I wanted to give it the 50/100...

Looks like his dealer marked them with paint pen and everything looked right but I’ll give it a good check once I get it back home.

So we just settled on a price and he still has a loan so we have to figure out how to make that work where both parties feel comfortable before giving up finances before tractor and vice versa. Thanks for the helpful information on the service, it’ll be the first thing I do once I have it...

Thanks for the advice everyone. I was mostly going to take it to the dealer to give it a good check over since I’ve never owned a tractor before. Most of my “wrenching” has been on my atv but very minor like winch install, brake pads, calipers, and new rotors. And to get a 3rd valve installed...

Cheers! I didn’t think it was a huge deal. Now if it was at 300 hours, I’d be a little more skeptical.

Hi, New guy here. Just looked at my first tractor from a private seller. It’s a CK2610 and has 99 hours on it so it’s due for its 100 hour service. Owner said he never changed the fluids and filters at 50 hours but everything looks dang near new. Would you be skeptical of purchasing a tractor...