Search results

I usually run napa filters

I usually buy Mobil delvac when its on sale , I try and use the same oil dos that make sense?

will be 400 tables of toys

yes i have several old toys from the 50's to the nineties

maybe not the right catergory, im going to Sioux Falls Sd , to set up at the farmtoy show hopei sell lots, might have to buy a few if your there stop by

i got a 5 gallon can that has a batterty pump on it works great

a dealer here sells tym , neighbor had one it was junk , no parts, service dealer is a joke they wont even answer the phone , now there selling hyundi construction equipment one day i assume it will be closed bunch of clowns that work there

she just went on a cruise , must be nice to rip people off and enjoy it oh well life goes on

I bought a 3320 jd used in 2016 has been a good tractor

ok im in northern North Dakota , neighbor had a tym lots of problems, no parts service , and didnt run well in the cold

what is the climate where you are ? Ive heard tym dont work well in the cold

too late now ,all done but i know not to hire them again

mom had this all setup, with them , someone said u should have hired this other lawyer in town hes cheaper , but he never getsanything done and has stolen from clients , still practicing though , how I dont know , warming up here today goin to be 35 woohoo

correct , seemed like they wanted to drag it out $$$ done now I know I'll never hire them again

not sure this lawyer is where the trust was done , I know if they call u talk for 3 mins its a half hour charge

A little over a million in assets

guess i should have been a lawyer $$$ , I did all the accounting stuff , oh well its done now

maybe off topic , my mom passed away a year ago , she had some land and a house all in a trust , i have two siblings the will said divide everything equally , went to settle everything yesterday at the law office , bill was $12,500 seems high but i dont know its done i guess

vintage sled site is good for info, lots of parts for sale there too

would be a nice one to restore

my english teachers hated me

I have bought and sold hundreds of them , most have been junkers , i got 40 off an old farm kept one sold the others made some cash , sad that most of them sat outside too far gone but good enough for a few parts

I have 15 of them , most are vintage

so sorry

my bad

thats cool

ok used yo have a nice trail here had a couple winters no snow and the club disbanded state shut down the trail sucks

are any of you into vintage snowmobiles ?

wont buy one of those from lowes again , the lt 160 it replaced was best mower ive ever had , sadly lost it in a building that caved in

bought a d 100 lawn tractor a few years ago , what a pos

where u located ? here ( north dakota ) frozen tundra sometimes i plant in april , sometimes its into may here red norlands are an early variety , vikings are later , I go to a fam]rmer and buy 100 lb sacks of seed, I tryed a purple variety this year they didnt yield very good it was dry this...

during cleapup week , i saw a kid wheeling a little dirt bike out of the garage, i said u throwing that , his dad said yeah its a pos and gave me some parts he had , took it home fixed the chain , fuel line puton marketplace sold for $600

that sucks , but not surprised these days

theres another station, they dont want to do anything , went in one day with a propane cylinder to fill gal at front said they were too busy , i said theres two guys back there doing nothing lol i blew up havent been there since

i sure miss the old days , used to a guy big jim worked at the gas station , if u had a flat { truck tire } he say give me a couple minutes and toss it on the machine get it fixed and roll it at u when done seems like not guys like this around anymore

ive owned 3 chevy impalas , changed oil , a few bulbs , brakes no other problems with an

i sure hope not

yeah hopefully

im stuck with this one now 4 awhile , cant win them all , miss my 90's chevys went forever ad cheap to work on

couple years ago I bought a 2012 f 150 had low miles , have 142.000 on it now just got out of the shop $4000 worht of repairs , timing chains and all the bs that goes with it anyone else had good bad experience with one ?

used too be a shop here they bought fleet semis cut and stretched them some were good once in awhile would be a bad one

my buddy had gmc generals they were beasts

the chevy dealer here years ago had 427 rebulids ready to go and mechanics on 24-7 during beet harvest didnt take them long to swap one out now hard to get anything done after 5 , evenduring normal hours went into the coop with a flat two guys standing around , guy at the coub]ter said they were...

was a ton of chevys around here , quite a few ford louievilles , all semis now

its a 366, was a tandem on the auction only bad thing 5+4 trans , those get spendy too work on i bid on it though had a 427 used to drive thoce 80 mph full when i was young and careless

dont have any pics atm

i bought a 75 chevy single axle grain truck on an auction , $1500 its in good shape no rust I thought i got a good deal

still working on it , sister was around for awhile wouldnt let me throw anything , goin to get another dumpster i filled up 3 this summer , sucks but you cant save everything, got some items too drop off at good will , someone broke in and stole a bunch of good stuff

I worked at a sugar factory , used to move all the rail cars across the road to the pull line , always picked up broken coupler pins to use for drawbar used to find all kinds of goodies laying out in the yard

best mower ever built , 318, 420 , 332 i want all of them

write to mr thinker - green magazine , u might get an answer or a smart remark

awesome

he hates olivers

thanks , Im goin to try a bobcat

im goin to demo a Case , maybe a Kubota keep trying all of them lol try before you buy

wow ive always wanted one , had a 300, 316, 317

any tractor guy followers ? millienial farmer ?

thanks for the info

my bad

where are you located? gets darn cold here in North Dakota , been a goog tractor though

no cab on mine gets cold but nice for getting on n off in the summer , next one i get will have a cab

thanks

just had mine repaired , one side , is there a vented dipstick ?

sorry about the repeat reply , kept saying invalid msg

no i dont

i dont

I dont

ive owned a 3320 for 8 years never had any issues , only thing is there light on the back end i weighted ti down

Ive never done it but around here u can get ash fines from the beet factory hve heard it really packs down , might try a semi load

I think im goin to demo a bobcat , deere , case see what works best

thanks , theres a hyundai dealer just down the road been told they are no good

good ? ill check

looks good

good point , I know a guy the machine quit had bucket up had too kick window out

what is your favorite skid steer ? i rented a cat too clean up a few things , plenty of power , i might buy it , last one i used was a melroe , maybe i should demo a couple different ones before i buy, sure has been nice in the ac on hot days

wasted part of day yesterday at an auction , couldnt believe all the hoses , hangig from rafters in a lean too , tires four huge totes full of rotten fan belts etc , 5 semi van trailers full of sh*t , trailers were 70's models went 1500 , remember when they almost gave them away ? 50 miles from...

people who pass you then slow down

Todays nightmare , bought a melroe multiweeder on an online auction , in the pics didnt show main frame tire was shot ! was a lot of f%%king around got it home though, was a couple trucke i bid on after lokking at them glad i didnt get them went over to look before sale some dude as there said...

does anyone follow him wheres he from? another guy on facebook fun to listen to forgrt what he goes by , tg hatws olivers

I have some 185 ih planter units would like to make a pull type atv plot planter , anyone have one i can copy?

exactly , i cut my mowing time in half

old John Deere was getting harder to turn

have lots of trees to go around

its a gamble , i wasted a day , but saw a fellow bidding on an item i have he lost out , so i sold him an old disc that was sitting rotting away

I have an old remington lol its heavy

must have been the cheapest got at tsc , shouldve went a few blocks farther and got a stihl

needed a chainsaw fast bought a husquvarna what a POS

sometimes i sell junk and buy more lol

there was a zero maintenance program on this farm , and anything that could be bent broken or twisted was , and when done with it pushed in the trees

was some chevy tandems , $500-1000, if they would have had them running could have got more most of the tillage stuff was dirt cheap ,in the shop huge pallet racks full of stuff , sold in sections , I would assume some of the equipment would run , i guess they didnt want to screw around putting...

yep its bs! and too top it off there was a lunch wagon there would have been $21 for a meal so i skipped that , hardly any live auctions anymore so was a good waste of my day

I understand but I overheard him and auctioneer talking and he was just running up the bids , it is what it is

and a lot of things will stay there family member bidding stuff up and people caught on , he tryed selling me item he outbid me on , no thanks

went to an auction yesterday bought a few things , they didnt start anything combines tractors trucks , mowers , pickups, stuff was rough , estate sale , stuff brings more when it runs , i bought a trailer load of junk lol, boxcar magnum 7120 showed 11.390 hours , looked used and abused was the...

k

soil is sandy on a gravel ridge , hopefully can have my renter dip rip this fall that should help , i have access to lime if that would help?

just had some stumps ground at my moms , that will work thanks

manure ?

ok thanks, what should i mix in there ?

when i was a kid worked for a neighbor 1800 rpm , nothing more, he caught me i had the throttle pegged in a versatile 895, when he retired another neighbor bought it , stillgoing theres 13,000 hours on it , dont think much has been done to it

thanks ill get some grass clippings anything else i can get and mix them in , wont make this mistake again

nice

ive been digging it trying to air it out , its like quicksand

I bought a Jd lx 280 about four years ago from an older man , was in nice shape , i maintained it well , decided to try a zero turn , i bought it for $500 , sold for $1500 so was a nice profit , they said they would give me $300 on trade lol

RR , usually one working four standing watching

neighbor buried a versatile one time , i could reach the radiator cap standing on the ground , a few broken cables two 4wds a trackhoe got it out

thanks , looking to bury and bust up the stalks , looking for ideas to build a mini ripper

wet here , although one neighbor likes it never gets anything done and will f&&k around until he can pp and collect

glad i mowed last night , its pouring now

mowed last nite , first time no bumps or bruises on the mower hope it stays that way , that kawasaki has some power , now my Jd lx 280 is going down the road

thanks , too small i have 620 Jd , M ih , and 3320 Jd

I have a small garden patch, an old disk some chisel plow shanks plenty of iron would be nice to make a ripper , one day , i plowed ny corn ground last year worked ok nice to get those stalks buried

bought a toro , titan thanks , thanks thank you for your valuable time

thanks

so im a hobby farmer , neighbors terra gator blew up last year full of fertilizer, we emptied it out i put some in some old chemical totes , the rest i dumped on my plot , i covered it until fall when i spread it , nitrogen, where i had the pile the soil has turned to muck , maybe this fall...

thamks everyone for the info

lookking to buy a zero turn , what should i get , what should i stay away from