Search results

Im not sure. They sent me a brand new valve that I put on but it's still doing it

I have 132 Hours on my machine, and a few months back I was using the backhoe and I started to get a high patch whining at 2000RPM. As soon as you move the loader stick it stops but comes back when you let it go. At this point I have disconnected all the lines reconnected everything made sure...

Update. I have 87 hours on machine and 3 leaks. 2 in the rear and the left front axle. Not to happy. Ive been dealing with the dealer for 2 months to get it fixed. Anybody else have leaking issues?

Update. Dealer sent me the part to replace. In the end the 25 dollar part didn’t fix the issue instead It cost me $4000. When I got finished I started the tractor and the backhoe Went right through the garage door. I Forgot to put the seat backdown for the backhoe, and the seat was pushing on...

I sold a kubota l6060 grand and it did the same thing. It was hard to turn tight if you had a load in the bucket at low rpm. When throttle up it was fine

Pretty much thats what I was told. Need to up the RPM when doing loader work

So dealer ended up swapping out the machine. Unfortunately the second machine was doing the same thing. At this point I was very frustrated but luckily when I contacted the dealer the engineers from Japan were already at his dealership for some kind of conference. After they got the first...

If it helps you i just came from a kubota L6060 grand to a yanmar yt359c. The tractor is so smooth running. Everthying about it seems to be top quality. Unfortunately I have an issue with mine right now and didn't get to put a lot of hours on it to really test it out.

Yes you are correct if you take your foot of the accelerator it does stop. But even if your in gear and flip the column shifter to neutral the tractor will roll.

Im new to the machine, But from what the dealer told me only use the Clutch when shitting from low-med-high gear. Then I also seen people say its just a dummy clutch for people that are so used to using it it's just like second nature to them. The owner manual says that when you let of the...

No dealer had one instock at the time. I think they said it left the shop at 0.9 .

I dont think the dealer new anything. The only reason i say they that because they are 12 hours away from me and thats a pretty big risk for them to take. Only thing that does have me scratching my head, is the dealer said on the sheet that follows the tractor they have it listed at like 0.9...

So yanmar has a list of stuff that need to be gone over. I guess after they install the third function kit they do pressure test. On the check list sheet the pressure test was good. From there it has it getting loaded on to the trailer to ship to my house. Yes im sticking with them. Should have...

The noise Was Heard from the passanger side front windsheild to the passanger side back windsheild underneath the machine. When you would put the loader up you would hear it. When you stopped the loader it would get louder. If you tapped the loader stick it would go away, but then when you would...

Rscotty, Stil makes the noise without the 4 and 1 attached and still makes it when the backhoe is unattached. Something internal. When they had the tech at my house they checked everthying. Three point hitch arms up and down, a hydraulic speed wheel thing underneath the seat they checked. Did...

D&D, No not at all. But if im paying $75000 for a tractor it better be right. I think most people would agree

Has the factory yanmar 3rd function. I just purchased a 4 and 1 bucket from wr long.

I do appreciate the dealer helping me, but on the other hand they sold me a defective machine. I'm not saying they sold it to me knowingly it was defective but it was still defective and somebody needs to be held responsible. We are not talking about $10000 machine. Now if I had 50 hours on it...

Well I got my new Yanmar YT359C TBL. Went to use tractor last week and loader was making a buzzing sound when using it. Sounded like it was coming from the passanger side of tractor. Long story short called dealer. They got in contact with yanmar and had a tech come out monday. They confirmed...

Thanks for the info. Ended up going with the YT359C TLB

Im looking at purchasing A YT359C. I seen this about the hydraulic flow rates between the 359/347 machines. " However, when it comes to hydraulic flow rates, the 347 exceeds the 359. The smaller tractor can move up to 10.1 gpm (38.3 l/min) for the PTO and 5.7 gpm (21.7 l/min) for the power...

You did luck out. I just ordered a l6060, dealer said a few months

Talking to dealer about ordering a L6060. They said time frame was about a year. Is that pretty Accurate? Thanks

Mite be a dumb question. The back vents need to be open or closed for recirculation? Thanks

My 5520 did about the same time for regen. Funny thing is mine started to have the belt Squeal after. Had to have the dealer Tighten it up.

You would need a light at the tube to see the vapors

Just got back from dealer. They said it was fine. Hard to believe since exhaust vapors blow out of it all the time.

I have the Exact same roof and color. I loved it tell the first big snow storm. My installer also used a Commercial snow breaker bar. let me tell you, When the snow comes of the roof it’s all in one shot. Im in Pa and this year was the worst ,since we built the house. I would open the front door...

On a 25 foot deckover gooseneck trailer, Where is the best place to position a larger compact tractor. I have no attachments or front bucket on , and the rear tires are loaded. From pictures I seen, seems like some people Position the rear tires In between the rear axles. Then i seen other...

Nope

I have about 75Hours on machine and noticed yesterday that the engine breather was coming out like exhaust. Is this normal to see anything coming out breather tube. At 50hr serviced and used mobile super 1300 15w-40.

On the rear axle, the shaft that comes out the side to the wheel leaks. Im no mechanic, so does anybody know if the rear of the tractor has to be all taken apart or is it a simple seal that just get popped in and out? Thanks

I have a new 5520ch. I live in pa. Everytime i start the machine cold the doowon injection pump is really noisy. As it warms up it go's away. I have clean fuel and treat it. Is this normal? Anybody else have issue? Thanks

well I have 33 hours on my 2020 5220ch. So far the shaft that comes out from the transmission for the 4wd leaks. Took it to the dealer for repairs, but stills leaks. Then yesterday the 3point with my brushmower attached got stuck up in the air and would not come down. Then to top it of it...

wanted to give everybody an update about the issue I had on my new machine. The machine was low on coolant after I just picked it up from the dealer. I was not happy, and spoke to brason about it. In the end they really made sure I was happy. The district manager called me directly and set up...

How would you guys handle this. I purchased brand new 5220ch loader backhoe. Went dealer yesterday picked machine up. Get home take machine off trailer drive around and noticed the coolant Gauge in the red. Quickly turn machine of. Look over everthting can't find anything. The over flow tank...

Can anybody tell me what the April incentives are on a 5220ch? I can稚 find them listed anywhere

Hopefully this is my last question. Have anybody ordered there machine with the brason third function installed? I have already had 2 wr-long kits before so I'm not sure I'll be happy going to a Diverter valve kit since I've been using the wrong kit for so long. I just like the fact I can order...

What kind of price are the 5220CH with backhoe go for? Thanks

I was looking at a 5220ch but the closest dealer to me is like a little under 3 hour away, which means if anything would happen I would be driving 3 hours to the dealer. I like the tractor, but not sure if it would be smarter get another brand that dealer closer. After the 50 hour service is it...

Looking at trading In a 2019 6075 for a 3650 hst. The 6075 is to big for my needs. I was wondering how is the power of the 3550 or 3650? I had a kioti nx6010 which was 60hp and it worked out good. I'm just wondering if the 49hp 3650 natural aspirated power ratio to weight feels. Feel strong...

On the 6075, do you fill the hydro up tell you see it in the site glass or check it were you fill up since there is a dip stick on the end?

I purchased a new 6075 powershuttle. With the powershuttle can you come to a stop and put it in neutral, and then put it back into forward or reverse with no clutch. I know you have to use the clutch for shifting gears.

I have a rotary tiller question? My new machine is 6.89 feet wide. Will a 7 footer be okay or should I go up to 8 footer. Im not sure if tillers are true to size or overall bigger then the size stated. Thanks

I was pretty close to purchasing a 6075. Then I was reading skipp 77 thread and seen another guy on YouTube having starting issues. Does anybody know if they got that valve issue resolved,that skip77 was having? Does anybody else on hear have 6075 and have no issue? Thanks for any info

I have a nx6010 cab. Is it normal for the check engine light to come on when it's cold out, but after about a min it goes out? Thanks

I have a nx6010 with the factory backhoe attachment. My sub frame has cracked twice. Is anybody else having this issue? Any suggestions on a more permanent welding fix? yt?

I had a buddy find the picture of my broken cylinders on his phone. I do have a picture of the pile but i have to find somebody that has that one since I do not. Check it out let me know what you guys think. Dealer though it was weird they both broke like that. Thanks

Hey coobie, I don't have the pictures anymore but here's the receipt. Not sure why you would think somebody would lie or make something up like that. Hopefully this ease your mind. Also I sent over pictures of the latest issue with the fan chewing its self apart

I have a few acres I would like to start to plant on it. Ive been reading a lot of posts, But I'm not sure if its better to buy A plow and disc or plow or tiller or a cultivator. Im in Pa I have a kioti NX6010, Any help or suggestion would be appreciated

Looking at tradeing in my kioti tractor for a 3550 cab hst loader backhoe. What's a good price on this setup? Seems like most dealers in pa are around the 51-52 thousand mark. Also if you have one do you like it,what issues have you had with it? I seen some of the post with the heating up...

Asked before but need help with new trailer setup. Looking at getting a gooseneck tilt 22 or 24 footer or a gooseneck deckover with 20+5 hydraulic dove. Im hauling my kioti NX610 cab. Sometimes I mite have to put the backhoe on. The tilt and hydro dove are around the same price. Im still trying...

My NX6010 was taking a beating when I was using the root grappler. The hood and front grill are pretty smashed in. I got two pieces of expanded metal and made this. Wish I would have done this when the machine was new. I highly recommend doing this is using a root grappler

Has anybody ran into this yet on there kioti nx6010 or other NX models. The front axle bevel gear case leaking grease? Mine are and when I went to clean it today the rubber seal pulled out when I wiped it. Dealer told me don't worry about just keep greasing it.

I have a NX6010 Cab model. Why does the owners manuel say 11.9 gallon for the transmission fluid and replacing transmission fluid and filter it says 14.6 gallons. Which is the right one?

I have a nx6010. My owners manual list 10w-30 10w-40 and 15w-40 for oil, but has nothing about temperature range. I have scahffers 711 10w-30 that I use in my ford 6.7. Since the schaffers oil is pretty good you think it will be okay in my nx. I'm in pa so I have seasons. Also how many quarts...

I feel like I'm having luck like Eric. Today as I was brush cutting I Got out to see what happened to the level guide as it was just hanging on the side of the loader. Then I seen my fuel cap was missing. Im not sure how long it was off, But I'm not sure if I should drain the fuel replace the...

My wife and I purchased a farm that has been neglected. I have ran new electric service and gas service to the house. What the best attachment for trying to clean up yard of rocks and roots and leveling dirt out? Is there anything that does it all? thanks

You guys that have the 3550 Still having problems? I seen a few threads about some issues. Looking to maybe get one. Thanks

Looking at a 4460R any good dealers east cost side of Pennsylvanian or NJ? By Philly area? thanks

Today I went to pickup my new 1758. After I signed the papers I pulled it onto my trailer and it staled out. Cranked it a few times would not start. Finally got it to start and backed off my trailer drove it around, and then staled out again. Long story short I told them I didn't want it and the...

Any buddy ever purchase one? this is the specs SD model. I would like feedback thanks " NEW 72" SD ROOT GRAPPLE ATTACHMENT Universal Quick Attach - Fits Most Makes & Models New 72" SD Root Grapple Attachment Tractor Loader Bucket Rake Kubota Mahindra 6' | eBay "You are looking at a New...

massey 1700 series quick attach bucket like bobcat style?

Got a price on a 1758 Cab Loader backhoe for 53,500 before tax. That seem like a good price?

I have a 2009 Bobcat Ct450hst loader backhoe with 319 hours. I have the 72 inch front bucket and 18inch bucket with mechanical thumb backhoe,and rear work light. The machine is garage kept and waxed yearly. I changed the engine oil every 50 hours. Hydro oil was changed twice and I replace fuel...

Ive be looking at selling my 2009 Bobcat Ct450 loader backhoe. Dealers wants to much to install cab with heat and AC. I only have 319 hours on the machine but was looking to get into a kioti nx6010. After reading the threads from eric I started to think different. Im also looking at massey and...

is the 3500 series more of a commercial line? They seem pretty heavy vs the 2555 I was looking at. Also is it true the 3500 is a fully mahindra built machine vs the 2555 a different maker?

Any good dealer around Lehigh Valley region of the eastern portion of Pennsylvania? Thank you

Whats the difference between the 2700E VS 1700 premium compact series? They list the 2700E as utility but when you read about it ,says its in line with a compact tractor?

I have a 2010 Ct450 with around 318hours. My unit is hydro. Is it normal if you have the machine throttle up and pull forwards the rpms drop a little tell you get moving and come back up? I haven't taken it out in a little bit can't remember if it always did that. If its not normal what could be...

I posted a few weeks ago about selling my deckover gooseneck and getting a deckover gooseneck tilt trailer to move my bobcat ct450 loader backhoe around. The issues I was having is unloading. The way the trailer sat everything was maxed Out and the trailer was high in the front, So i could never...

What are you guys paying for a 1538 hydro Loader backhoe setup and the 1533 setup with loader backhoe thanks.

Need some help Figure out what to do. So I just purchased a new suretrac 25 deck over gooseneck trailer to move my bobcat CT450 loader backhoe around. Problem is I find that I have to park on a very flat surface to get the ramps down. If I have to pull on to grass or anything thats a little...

Looking at ordering a new 2016 super duty. Dealer told me up to 18 weeks if i order. Anybody else order one with in the past month and was told the same?

I want to get insurance on my gooseneck trailer. Who do you guys use? Any company that specializes in trailer insurance

Okay Some pics of my truck with trailer. As you can see it does not squat to much. I also posted my weight tickets. 1-Truck, 2-Truck with trailer, 3-Truck trailer and machine. Can somebody tell me how to figure the pin weight out from these? thanks thanks

Im looking at getting a new truck. I have 2 gooseneck trailer one a 14ft dump and the other 25 deckover gooseneck. With trailer and what I tow I'm around 13,000. Im thinking of just getting another ram 2500 vs the 3500. I really liked the coil spring setup on the Ram. They have the same tow...

Just got a new BigTex goosneck Dump trailer. I was going over everything and seen this with the scissors lift. Its not effecting it going up and down, But it looks like it hits one side when its down Is this normal? As you can see by the pics the left side has space and the right is smashed up...

Im looking at getting A PJ dump trailer. Is it worth it to have the inside line-x or something better or just leave it go? I figured when not using the trailer i can spray the inside down with fluid film help stop rust over winter time

Anybody with a new chevy or ram with integrated brake controller have any problems with the dexter electric over hydraulic disc brake? Going to order new trailer and would like to get this setup, but was told by dexter that there system don't work well with the factory brake controller. Thanks

Has anybody had issues with part number not matching up. I just got done dealing with grease fittings. The part number for them are wrong and they can't find the correct ones for my machine. Yesterday I just had another problem. They ordered me a New pressure cap part# 7002330 straight out of...

Replace coolant On CT450 I drained out cleaned reservoir tank. How much to you put back in and do you fill the main tank first?

Im In Pa and I'm looking at getting a new truck and trailer. Problem is if I go up to a single rear wheel 3500 vs 2500 I'm at 11,500 gvwr vs 10,000gvwr. Then add in a 25 gooseneck, and most company today rate them at 15-16 GVWR, You are over the combined weight rating of the truck. I see people...

Okay I have a 2014 Ram 2500 with the Diesel in it. My truck Is registered at 25,000 combined weight. I have a cornpro 25 gooseneck deckover with 7,000 axle 14,000. They rate the payload at 12,300 thats with 20% over truck axle. My machine Is a Bobcat CT450 with loader and backhoe. Im not sure...

Finally had the trailer breaks checked out. All four are shot and covered in grease. Good news they are getting replaced under warranty. Bad new why did this happen, and will it happen again.

I have to haul my buddy truck on like a 2 hour ride. Can anybody tell me if the tire ratchet straps are any good vs chaining and binder off the frame? thanks

My Ct450 hydro wont go into high gear. It pops out and grinds. It feels like that rubber stop pad was out of the way it would go in. Anything to look for before I take it to the dealer? thanks

Need some help. I have A 2014 Cornpro 25FT deckover with electric brakes. My brakes never seem to work well. Can somebody help me understand how trailer brakes are supposed to work. Should the trailer brakes alone be able to stop truck and trailer? I just had trailer inspected and brakes adjust...

Im up in the air about getting a pto generator for my bobcat ct450. Can somebody tell me if its safe to run the pto and tractor for a few days at a tiem if need be? Also any suggestions on who makes go pto generator? Thanks

I wanted to find out if anybody could help me out. Im looking at getting easier a Bobcat 3400 UTV or yamaha viking. Im having a hard time deciding between the 2. On the bobcat does anybody know if it comes with power steering? Also is it worth getting the diesel vs the gas? My land and house are...

Just Picked up A new CornPro. Pretty much going to haul around my bobcat CT450 Loader backhoe. Alittle overkill but I figured wife will never let me get another trailer again so better go big.

I have a CT450 WITH backhoe. Today I noticed If I have the Hydraulic on For my backhoe, I cant move the three point hitch up or down tell I turn the hydraulic of to the backhoe Is this normal?

Does anybody have the part number for the bobcat front hydraulic line kit? Does it come with everything to mount them to the front and also what controls the front lines once they are hooked up? My local dealer cant find anything on them. Also if anybody has pics of it hooked up. thanks

Just ordered a tractor supply county line 7f rear professional blade for my BOBCAT CT450. I was wondering whats the different between the standard and professional model? They didn't have any specs on it like weight or steel size. I was hoping its alittle better then then standard stuff. thanks

I have a CT450 what's the best size box blade to get? I was looking at 6 or 7 footers thanks

On my ct450 Its hard to go around turns and when I drive into a pile of stone I see both back wheels driving at the same time. Is my diff lock broke or is that normal?

Just got a new fuel filter for my machine. I see it has 2 o-rings but the new filter did not come with them. Do you need to order them or can i reuse them? thanks

I have a ct450 with the backhoe on it. Anybody know how to take the backhoe of. I have the bobcat backhoe

I have a ct450 I drained the front axle for 2 days. When i filled it back it took 5 quarts, and the ball was at the top of the sight glass. Drove around for 5min and the ball never moved. What's the deal the book says 8 quarts.

Im looking at selling my bobcat ct450 and purchasing a mahindra. What model would be comparable to the bobcat CT450 which 49hp? Thank

How much did the prices drop of across the board on the bobcat tractors? I have a 2009 CT450 HST With industrial tires 9TL Loader with 72-inch bobtach bucket and bolt on cutting edge. Also have 8TB backhoe with 18inch bucket and weld on thumb. I have the work light installed in the back and...

I just purchased a used proline 118. It was working good but i think something in the engine went. Does anybody know of somebody that rebuilds the Kohler M18QS-24657? Thanks

Anybody purchase the bobcat 3PT Rotary Cutter, 72" Slip Clutch? What was the price you paid. Also any-better cheap alternatives to the bobcat brush cutter. thanks

Has anybody ever made a skid plate for there tractor? Seems to me most problems are caused by tree limbs getting stuck underneath or hitting rocks. At least for me. I wonder if i make a skid plate if it will void my warranty. What you guys think?

When you guys top of the hydro oil do you bring it to the top of the line or keep it in the middle on the dip stick. Mine is pretty much at the very top of the line. I dont know if that good or not. Also you check the top of the dip stick not the back side? thanks

I spoke to kioti, and as of last week they have updated some fluid info that will reflex in the owner manual which will show the following example of fluid to use. Figured I would pass them on. Engine Oil Recommendations: Choose an oil with an SAE rating of CC, CD or higher. Below 32 degrees...

Im going to change out my hydro oil on my CT450 HST. I have a friend that can get a good deal on Kendall Hyken 052. Will this be ok to use? Kendall Hyken 052 "Multipurpose Hydraulic/Transmission/Final Drive Fluid For Farm Tractors. Kendallｮ Hyken 052 is a multifunctional fluid specially...

I need to change the oil on my CT450. What weight oil are you guys using? I dont know if i should go with 5w-40 or 15w-40 Im in Pa. thanks

I have a 2009 CT450 HST With 103 hours 9TL Front loader and 8TB Backhoe w/18 bucket. I also have a thumb installed and a rear light for working at night. Grill guard . I also have a wood weight box. What is this setup worth?

Do you guys with CT450 go through alot of fuel? My machines seems to drink it like no tomorrow. I have a backhoe setup so i know the machines weights more to move around, But Im going through 4-gallon every 2 hours it seems. That is running almost full throttle and driving around and stopping...

Need some help. I just purchased a lowboy gooseneck. It needs new tire's. On the plate on the trailer it says 750x16 for the tire size. My ? is can i go to a ST235/85R16 As long as it meets the 14,000 gvwr rating of the trailer, or do i have to stick with the 750x16 to pass inspection?

Does anybody know what's the total weight of the bobcat CT450 HST with loader with bobtach and backhoe and fluids. The book listed it as: HST-3935 Backhoe weight with 12in bucket 1118 i have an 18inch bucket so I'm going to say 1300 9TL- 1312 I have a 72 with the bobtach so i dont know what...

I just wanted to say I purchased a Bobcat CT450 loader backhoe from Wallace Tractor and highly recommend them to anybody looking to make a purchase. Rick is a great guy and very helpful. He will take his time to explain anything you ask. Good example a few days ago after not getting any good...

I hope somebody can help me with this. I live In Pa, and was looking at getting a gooseneck to pull my bobcat. My truck GVW is 9,200 and unladen weight of truck is 6,249. The trailer I was looking at is a GVW of 14,000 and unladen weight of 5,200. My bobcat is around 6,600. Do I need to have...

I just purchased a bobcat Ct450 with 26 hours. When I start it for the first time it blows out alot of black smoke followed by white smoke and alot of shuttering then it clears out and runs fine. Also the coil light goes out then i start it then it comes back on when its shuttering and after a...

What kind of price would I be looking at for a massey ferguson 1643 hydro with loader backhoe deal. Any dealer can also PM me a price. thanks

Im shopping around for a EX3200 loader backhoe. What time of the year do you think they will give the best deal. Also what kind of prices are you getting on them thanks .

Will a deckover gooseneck be ok to load a skid steer on and off or a lowboy be better

I was looking at getting a gooseneck deckover to pull a cub cadet ex3200 with loader backhoe and sometimes a john deer 3320 with loader backhoe, and have a few question. I can get a pretty good deal on a 20ft 96 width and a 24ft 96 width trailer. I was wondering is it better to stick with the...

Can somebody tell me what the full length of a DK-40 OR 45 hydro with loader and backhoe is? I知 just looking for the measurement of the tractor as if it was on a trailer. I知 trying to figure out what trailer size I will need. Thanks

I知 going to purchase a KIOTI DK-40, 45 hydro with loader and bucket. I have a 16ft heavy-duty landscape trailer rated at 10,000. I can haul my buddy痴 John Deer 3320 with loader and backhoe just fine. The only thing is the backhoe bucket hangs over the tailgate because it a full gate and not...

Whats the better choice to get the DK-40SE HST or DK-45SE HST. The Dk-40 has less horsepower and the overall width is less. Its seems like eveybody thinks the DK-40 is the best bet but i just cant make up my mind. If it not that much more for the DK-45 i feel that would be the way to go. Any...

Ok I知 trying to deicide between a Case DX-40 HYDRO loader and backhoe, or a kioti DK-40 HYDRO with loader and backhoe. I like both but they both have their advantage and disadvantage. Case DX-40 Lighter then the kiotie 1,700 lighter Power train made in Japan and everything else in USA PTO is...

What kind of price would i be looking at for a new case Dx40 HYDROSTATIC TRANSMISSION BHX1102 BACKHOE LX116 LOADER package. Thanks

Hey everyone, Im new to the forum and had a few question about a Montana 3940 vs. the farmtrac 390. I already owned a farmtrac 360 a few years ago and loved it, powerful and could work all-day great machine. Since looking at the two and reading, it seems that they are the same tractor, but...