Search results

massyrider I have 4 Grandkids with busy parents. They know without telling them how to work the Grandparents. I am the most challenging of the 4 Grandparents (the others are pushovers) but they keep working at me. I think they enjoy the challenge. Sometimes I win and they are working in the...

Manipulated (RSKY) Just put this wording on your computer screensaver so you will learn to just accept it. Post the reality message in a prominent place. Grandparents So easy to operate even a child can do it

John that is good to hear of the run times you are seeing. I will get a battery Powerhead and some batteries soon I am sure just to see how they work out. The good thing is with the Stilh Kombi system the attachments can be used on either. Since I do not golf i can use those funds to buy more...

RjCorazza I will have to get Echo Speed Feed Head as I hear many including you suggesting the change. Our Redmax and Husqvarna Line Trimmers still have what there brand heads on them but I need to try the Echo Thanks

ArlyA That is a good point about the larger diameter line using more power. For light residential use I usually use 0.080 inch but do change to either 0.095 or 0.105 when in heavy weeds. Another good reason to get the largest displacement unit of the 3 Stihl Kombi Power Heads...

TractorTech Good to hear on your old equipment. I love keeping good equipment running forever. I typically use VP red 2 cycle synthetic oil at 45:1 (like to be conservative). I think it is a lower cost of Echo Red Armor. Usually get it at Walmart or other stors for $12.99 for 16 ounce...

Update. I did purchase the Stihl KM 131 (4Mix) Kombi powerhead. Just working through the first tank of fuel with the line trimmer attachment. It seems to have more power than will be need for trimming and even heavy weeds but did I get the Bed Re-definer attachment that will likely use more...

How many minutes will the blower run on the battery?

I also use them on mine. Does not seem to be an issue. The only people I see without the guard are the ones using long line to cut open areas.

We use only enough engine RPM to cut the grass/weeds. No need to throw the cutting debris on you or any nearby landscaping. With 4 cycle trimmer engines and electric that have a variable trigger control running slower RPM is no issue. The problem is with two cycle engines that will load up...

I still have some Makita gas powered equipment and it was always good equipment and would expect their battery equipment to be good as well. The key is you already have the 18V batteries and charger which is usually the high added cost item. Side note: Have you ever looked at CPC Outlet...

Sometimes we can be slow learners. I stumbled on old song that I sometimes play for the wife as a better option than arguing with her when she is clearly wrong. She usually leaves my presence so I do not get to see her laughing. I google it on the speaker when she thinks she is winning a...

I do like the sound of a nice running 2 cycle engine (with earplugs of course). Especially my 75cc Redmax EBZ8000 large backpack blower. Although I appreciate the less offensive 4 cycle quieter note when around others. The elderly retired lady sometimes calls me the noise maker if she is on...

John0829 and Keith Nice to know the Sthil 4 cycle (gas and oil pre-mix) can at least tolerate one tank of straight fuel and keep on running without destroying the engine. I worry about that when I have help sometimes. I do keep my fuel cans marked well. Keith (just kidding you 🤣) at least...

5030 I also was not happy that Sthil 4 cycle hand trimmers engines require pre-mix gas and oil. I had hoped they had an oil sump for engine lube not requiring fuel oil pre-mix. My "most liked" dedicated Line Trimmer is the Husqvarna 324L. The best feature is it has the Honda GX 25cc 4 cycle...

Everyone I appreciate the many responses with respect to the Sthil 4 cycle (4 mix) power heads. Pleased to hear the positive experiences from this group using this series and the older variants. So in summary, you each have empowered me to spend some money on the Sthil Kombisystem. I am...

Over the years we have had both and you will get used to either after awhile. When buying front or rear wheel drive walk behind mowers my take is it depends on you yard and if you bag the grass clippings. Level lawn with out bagging the front wheel drive is preferred to me. Easy to turn or...

Want to add a Commercial Line Trimmer and Blade Edger to my tool/toy list, so thinking about purchasing a Stihl Kombisystem where you can use one powerhead unit with a changeable line trimmer head and a blade edger head. With my yard, older retirees yards, and kids yards I maintain 5 yards one...

Good option for someone that cannot store a trailer onsite or does not use this size trailer often. The center ramp would also be good for moving older (now antique) tricycle front tractors. Likely have to understand how much weight each ramp can handle. Anyone have a guess what it would...

I got tired of rebuilding carbs on hand held 2 cycle and 4 cycle single cylinder engines (up to 9 HP) with carbs so started using ethanol free (called REC 89 fuel here) and have not had to rebuild/clean any carbs in last 5 years. The REC 89 normally sells for 0.80 to 1.10 US dollars over normal...

Years ago one summer evening I was on I-270 Beltway around Columbus Ohio in my pickup when 3 motorcyclist pass me by at an estimated speed of 80+ MPH. Each of the 3 bikers with the front wheel up (wheelie). They continued with the front wheel up until I could not longer see them. I was...

RSKY Interesting that they dry up and no smell. I was always concerned that the rotting mouse would smell. Spanky

CliffordK Usually cats are great at keeping mice down but I have a funny repeating experience to tell. I have to laugh as in Texas we have a great indoor/outdoor cat that is good at keeping the small critters away out of the garage. We have a cat door into the house so he can come and go at...

mikester's post was what I found years back on our ranch style home. We had mice in the attic and could hear them at night on the ceiling drywall under the insulation. I put spring mice traps (wood base Victor) either duct taped or wood screwed onto cardboard which I laid on top of the attic...

plowhog As suggested by Hughman flat towing is a clear option with a vehicle that can be flat towed. Plus you save the weight of the trailer that will be a great help pulling your long grades. The trailer is only necessary if you want the trailer for other uses which sounds like you might...

(hope I do not offend any one with my following boyish thoughts below 🤣) 5030 Your dumping the consumed hamburger with drink over the bridge is an experience most will never have the honor of completing. Glad the riding suit stayed clean and you had the courtesy to pick a time when no "Lakers"...

bmaverick Running the bridge is quite a "Bucket List" accomplishment. That must have been a great experience and I envy that. My best running days are in the past and I now try to use a 3+ MPH walk pace including grades. The runners start before the walkers as I recall. The Labor Day...

5030 Great post with caution from your experience while riding a motorcycle on the bridge. I think the tractors crossing use the solid lane and not the grate side. I have driven across it in cars and trucks (in both lanes) and never thought much about it (except recalling each time as I...

bmaverick Great details on the rebuild that they go thru. Your 2014 price for the sweet YM2610 is envious form todays inflation increased prices. Thanks Spanky

careyo63 Thanks for the post and great pictures. 945 hours of work/play. (I always tell my wife her Kioti tractor is for work but she knows it is more of a toy) I bought it for her but she keeps reminding me that after about (from memory) 12 or 14 years she has never used it and it is...

ponytug It has been on my bucket list for awhile and not getting any younger so time to proceed with further planning. I have always liked the classic Yanmar tractors and have not seen them in parades so will combine getting a pre-1982 Yanmar for parades and making the bridge crossing. When...

bmaverick Thanks for the information on Yanmar Tractors Owners Group (YTOG) and keeping the past information and group going. I will join. Agree the Fredricks is a good way to proceed. Will have to make plans to visit them. Best regards Spanky

bmaverick and winston1 Thanks for your leveraged reply. I am thinking that there is a suitable Classic Yanmar for my (work) and play. Should I join the Yanmar Tractor Owners Group (YTOG)? Thanks again for the great information and quick responses. Best regards Spanky

Nice restored tractor you have including the added ROPS. I like that Fredricks adds that safety item. You have maintained it in show condition. Appreciate the other pictures and agree that a -10 or -20 power shift series is a great choice for the stop and go in the parade line. The...

winston1 Thanks for your information. Spanky

I am considering getting a Parade Tractor that will also be used for group drive events with tractor clubs on paved country roads. Distances for the road group travel events can be up to 15 miles. Most of the clubs i know target a maintainable road speed minimum of 10 Miles Per Hour (MPH)...

Eddie I would suggest leaving excess length wires with a cover plate over it in the metal box where the charger is to mounted. This way if you get an EV you can either install a NEMA receptacle in the box or direct wire to the charger. In our case the steel box (i think 4 inches square) is...

ning is correct for level 2 direct wired chargers supplying 11.5 kW/48A charge rate max (220Vac) use at least a 60 amp breaker and associated circuit wiring. The National Electric Code (NEC) requires that dedicated breakers supplying EV Chargers be rated for at least 125 percent of the...

Ruffdog Thanks for your initial question in the trailer post series and the link from my question on what fork pockets are. I had never seen this option on a trailer. It is a great option that I will want to include on my implement trailer. I learned something new today about a useful...

Xfaxman Thanks for the great pictures. I had never seen this option but will include on my trailer.

anyone have pictures of "fork pockets". Not sure what they are.

Nice looking tractor. Enjoy it. Thanks for the detailed write up and pictures. Keep us updated as you build hours on the tractor. I am starting to look for my wife's next tractor and think she deserves a cab. Been looking at Kioti and TYM and will now add Massey to the list. I like the...

George Thanks for the pictures of your tilt trailer. I looked at some trailers this morning (car trailers, implement trailers, and tilt trailers). The tilt trailer was nice without have to mess with the ramps. I agree with your input as I am now getting mature myself and the lifting is not...

Dodge man Thanks for the picture. Nice looking trailer, truck, tractor, and land with the snow. Looks like the trailer ramps are plenty long so not too much of an incline for a tractor. My Kioti CK27 HST might be a slight bit larger than your JD 2025 R but I bet they are pretty close. From...

diselscout80 thanks for the picture as it points our an 18 foot tailer leaving no space for adjustment

Clifford I did not say as I was self conscious to say it is the 2.7 turbo 4 they now call "Turbo Max". Torque and HP are pretty comparable to the 5.3 V8 but I am old school and I like the V8 gas and diesels. I have a friend that has a 20 foot 10,000 pound aluminum open car hauler that he...

That is a great point about many of the equipment trailers having the whees too far back. I suspect since most heavy trailers are pulled with 3/4 and one ton trucks it is not a concern although I would think the rule on thumb (that I recall) for a conventional tow trailers is still the 10 to 12...

Dodge Man Good point with the 1500 series and to consider a lighter trailer option. With my limited yearly towing it is a potential option. Over the last 20 plus years I have had 3/4 ton and 1 ton pickups but for the last truck purchase my wife said she would drive a 1500 pickup but not a...

George2615 Great info. Do you prefer the tilt bed trailer over non-tilt with ramps? My thinking for a tilt bed is incase I ever need to trailer a car or another trailer I could winch it up on the tilt bed easier than use ramps designed for equipment. Plus with tilt trailer would not have to...

Looking for help in selecting a trailer type to purchase with the following inputs - Current Tractor Kioti CK27HST with FEL (tires not loaded estimated tractor and FEL weight 3800 pounds) and 65 inch 3 point mount Flail Mower (900 pounds) = total weight 4700 pounds for tractor/FEL/Flail mower...

Robin great information. I have been using the Battery Tender Brand on all our battery start equipment and toys that do not get used weekly throughout the 4 seasons. 1 Auto, 1 Tractor, 2 PWCs, 1 Motorcycle, 1 Diesel Generator, and a 1 ZTR Mower. Fit all with quick connect fused lead to...

Digityman Just curious. Why did you initiate a manual DPF regen at 50 hours if system had not requested regen? My possible thoughts are 1) checking to see if system works as expected 2) wanting to learn firsthand 3) possible performance loss from exhaust back pressure to do DPF loading Thanks...

4570 We need the details behind the windshield damage. I Like to learn from others if I can. Sorry to see though.

Shouldibuy YES you have convinced this group beyond a doubt that you can justify a small tractor and front end loader. We like helping you spend money wisely. Always remember - As you get older your WANTS can be reclassified as NEEDS. Useful toys (work equipment and tools) also make...

tallyho8 So far she has not used my tactics to buy what I want for her Birthdays and Anniversaries. If it changes I could be in trouble. One year she did remark that that was not really what she wanted and went out and bought something to her liking. I was smart enough to say that is nice...

Thanks Gentlemen. Reading these post make me want one (for my wife of course). Her birthday is a great opportunity. Well probably less expensive then then the diesel side by side I was working up to. But I will need the fancy larger chrome wheels, lift kit, sun canopy, with the US Flag...

grsthegreat Question what front axle fluid do you use (gear oil 90w or Hydraulic/UTF or other? I ask as my CK 27 shows either a heavy gear oil or many Hydraulic/UTF are acceptable for front axle. Some suggest if using tractor in cold climates to use the lighter Hydraulic/UTF instead of...

Saw YouTube video where they were using it as fertilizer so your thought is on track. They showed the application rate as well. Likely when you reference box it is the 2.5 gallon size so not huge amount. I have to ask -- how past the expiration date? I might consider using it if not too old...

3rd Coast Glad to hear you have your Father's PT at your home and are making progress with getting the engine issues sorted out. This very helpful group will help you get it running well over time. The worst case would be a engine change/upgrade. Sounds like the PT-422 would fit your needs...

15W-40 HDEO year round for your location. Ok for cold starts and hot weather use. Better oil capability then the engine was ever designed to. Lowest cost and likely available. How many hours will you use the tractor per year? If under 100 hours just change oil one time per year and do not...

On 27DE21 son had 398 gallons added to his LP tank at 1.89USD per gallon. He owns the tank so not sure if that influences the price per gallon. He calls each time he wants added LP and they come next business day (M-F). Location is eastern side of Michigan's Upper Peninsula

ponytug Appreciate your broad input. Agree I need to contact PowerTrac and get their input for the various PT Products slope capability. Additionally I need to take a trip to see the equipment first hand in the PT yard. Reflecting on your special use. Most of my use is rough mowing with...

MossRoad Great use of changing the FEL position control from float to raise to transfer the implement weight onto the front wheels for additional traction when needed. Much experience in this group. Thanks Spanky

M5040 My typical Power Trac use would be field type "brush hog" cutting. I did not know the 1430 and larger have draft control to transfer mower weight to the front tires. That would be a benefit I would think for slopes. I like the PT425 for small dirt close work around the buildings but...

MossRoads Thanks for the specific engine information from Kohler. powering your PT I have an Exmark ZTR with a Kohler Command Pro. Exmark shows the mower capable at 15 degrees max. Will look at the Kohler manual to see what the engine limit is.

Power Trac Maximum Slope Capability Questions The PT website shows the PT 1850 and PT 1845 as "slope capable mowers" with the PT 1850 capable of 45 degrees and the PT 1845 capable of 40 degrees. What is the expected maximum slope capability for some of the other PT Products for mowing dry...

ljjhouser Interesting point that in addition to added weight for traction you need to keep the weight low for stability on the hills/grades. So I see why the 40 percent fill is recommended. That is a great point. I like the others (likely flatlanders) see the 75 to 80 percent fill...

KennyG I generate like you a small amount of waste oil (about 30 gallons per year). Sounds like for sure not enough to purchase a commercial supplied heater. I asked a friend that is a weekend crew chief for a small family sprint car racing team what they used to heat their shop with. His...

wdchyd Thanks for your information. I see the same around here with huge garages that have a large supply of drain oil using high cost purchased waste oil furnaces. I will look at the YouTube videos. Looks like for my small use the kerosene heater will be the choice.

Anyone using a waste oil heater or know of a reasonable cost small waste oil heater? It would ne nice to use my drain oil and not have to take it to the recycling centers.

I used EXXON Mobilfluid 424 for first change and will continue to use it as it is on Kioti recommended list plus is available many places. Watch for it to go on sale. I found it at Family Farm and Home last time for IIRC 39.99 USD for 5 gallon pails.

Fully agree. I live (summer time) in between the Ann Arbor MI Dealer and the Morrice MI Dealer. Bought our Kioti from MichiganIron in Morrice. Great dealership that treats me fair every time I go back for filters or other items. If you are close enough to them, do yourself a favor and take...

My first rodeo (as a spectator never been a participant it too rough for me) from memory was the Mesquite Rodeo south of Dallas. Great experience and enjoyed each of the events but my favorite was "Cowboy Poker". Once they let the bull(s) in the arena the Cowboys were looking over their...

The 100 percent gasoline here is called "REC 89". It is 89 (R+M) octane and does include taxes for road use. Last night it was 1.00 dollar more per gallon (4.299 versus 3.299) then 87 Octane "Regular" gasoline with 10 percent ethanol. I use it for all my 2 cycle equipment and my gasoline...

cqaigy2 and MossRoad I agree with both thoughts "BTW i still think tractors are cool looking." "I'd much rather drive an old tractor in a parade than my PT425. 🤣" Similar thought - a PowerTrac is like riding a Scooter. It is a lot of fun as long as your Motorcycle buddies...

Goose Glad your son is safe. He has received an early life learning lesson he will likely not forget at your loss of the Tahoe. Tahoe's will run forever with low cost parts until a major issue that is not worth repairing. I too have experienced that with my son. The phone to dad call was...

MossRoad Great advice that I will follow with one concern. When I set on the PT1850, which is what I WANT but do not NEED, I will likely start to rationalize the PT1850 purchase for my lovely wifes' next Birthday Present. She has been a great wife and has put up with me for years but I am not...

Goose Thanks for the great pictures. Nice to see the plastic fuel tank that Moss spoke of has ben replaced with what looks like and aluminum fabricated tank with a nice cap.

Goose Appreciate the information and nice to see a new purchaser make the PT 425 choice. I have been looking at a Ventrac 4500 for a few years to mow fields that have some slope sections that are beyond my comfort level on a traditional tractor with 3 point rotary cutter. This PowerTrac...

Moss Road Great detail and information from a 20 year PT425 owner and operator. I hope to call Terry and get to PowerTrac this fall. Appreciate your information and know if I get a PowerTrac this group and PT are always willing to help. Thanks

Lnk Great information. It is a significant help. Thanks

Questions on the 25 HP Kohler Gasoline Engine used on the PT 425. - is that an air cooled V twin horizontal crankshaft (730 cc) with single carb? (my guess from picture and limited description on PT Website) - Kohler model number? - how many hours would you expect with that engine before...

MinnesaotaEric Appreciate this thread and the detailed information on the good pricing. I have to be getting my wife's Birthday Present soon and the vise would be a great idea. I could use it to sharpen the blades for her ZTR Mower she got for our anniversary earlier this year. :D

What are the prices for the KenTool's KT4800 8" reversible vice and the Wilton 8" revisable vice. Where would one go to get the best price. I ask as I need a good larger vise. Thanks

Murphy mentioned he had replaced his optional factory Suspension Seat with a Air Ride Seat Questions to Murphy and others What are the Air Ride Seat Options Brands or where to Buy Are the nicer on rough ground then Factory option suspension seat? Do they come with Side Arm Rests? Thanks Spanky

Any one seen any enclosed trailers that are set up for Skid Steers and Compact Tractors. I have seen many enclosed trailers sold as car haulers but none of them seemed to have drive on ramp doors that would be suitable for frequent use with short wheel base skid steers and heavy compact...

I am looking for a 6 to 7 foot wide light duty Rotary Cutter. With a 6 to 7 foot single spindle rotary cutter the length from the 3 point pins to the tail wheel is longer then I would like to maneuver around. I see some offerings for two spindle rotary cutters in the heavy duty designs but not...

Trailer Ball Selection - Nickle Chrome, Zinc, Stainless, or no finish/raw? I have always used chrome finish trailer balls. They seem the most common and offer corrosion protection in the areas that the chrome does not wear off. The light grease then provides the corrosion protection in the...

I am into the learning phase for the vintage Yanmar Tractors. Likely will ask some questions that seem simple or misguided to most of the experienced group here. Appreciate any help and please include the additional information I am not knowledgeable enough to ask. My end objective for the...

I would like to get some thoughts from those with experience towing large enclosed trailers on narrow roads that have steep climbs and down grades along with the quick transitions down grades to up grades. I would like to use a 8.5 by 24 enclosed car haul trailer in NE Tennessee back country...

What is the best coolant to replace the factory fill coolant in CK and DK models. I believe both CK and DK engines do not have wet liners, so likely no cavitation additative requirements. Suspect any ethylene glycol coolant mixed at 50/50 with distilled water would work. I am leaning toward...

Just read the thread about the correct size Bush Hog to run with a B2320 Tractor. Looks like a 48 inch light duty Bush Hog is the best match for size/weight/PTO the B2320 tractor has. My question is - will a B2320 with a 48 Bush Hog cut tall heavy grass/weeds mixed in with a few under 1/2 inch...

Do the CK and DK models have a fuel shutoff on the pump that will allow you to crank over the engine with the starter and not inject fuel from the pump? I know there is a fuel shutoff/air bleed valve at the fuel filter but that would not keep the fuel pump from injecting fuel until the fuel has...

Observation after the initial engine start up after my first engine oil and filter change. Temperature 45 F with Kioti oil filter and 10W-40 CJ4 engine oil. The engine oil pressure light stayed illiminated for an estimated 3 to 4 seconds after the first start following the oil and filter...

Do any new current production chain saws have automatic bar oiler with a manual push button oiler. Some of the older saws had both systems. We have a older small Mac that has both. Looked at the Sthil line this week and all had automatic oilers. The smaller size saws did not have any...

Just wondering what the Factory Fill Engine Oil Viscosity is in our Kioti Tractors from the factory. I am assumming the engine plant fills the engine oil and does a running engine test and leaves the same oil in for shipment to the dealer. Possibly they ship dry and let dealer fill with oil...

What engine oil viscosity does the Bobcat Owner Manual Specify for the CT225/230/235 Tractors? Just checking to see if they call out the same oil as the Kioti CK27/30/35 manual. I was surprised that 15W-40 was not shown for "summer" oil in the Kioti CKs. The Kioti manual calls for the...

I have a CK30 HST FEL R4s(not loaded) Box Blade (600 lbs). This is the first time that I have used the HST High range for driving on paved roads. Each time I would set engine RPM to PTO rated notch on tachometer which is 2500 Engine RPM before starting out. When running full forward speed...

Any one have a estimate for how large of a circle it will take to turn this truck/trailer combination around without backing up. Truck is a 3500 single rear wheel crew cab 8 foot box (22 feet long bumper to bumper) and trailer will be a enclosed car hauler bumper pull 8.5 by 35 feet triple...

Looking for a used smaller CUT to use for finish mowing, light bush hogging, and FEL work. Estimate about 60 hours use per year. Found a 1999 TC18 4wd hydro, FEL, 60 inch mid mower, 48 inch bush hog, and box blade with just over1900 hours. Starts good and everything works as it should. No...

I see a few 3 axle enclosed trailers in the 28 foot and longer lengths. The axle specifications on a few of the 3 axle trailers I have seen were three 5200 pound rated axles for 15,600 total. Would a higher per axle rated dual axle trailer be available for a single wheel per side? or do the...

Question for someone that has taken a CUT a little past the limit. What was it like as you soil your drawers. You will likely be exposed to a 90 degree side roll with a quick stop. I am pretty conservative (or chicken) when it come to taking the tractor on much of side grade and will usually...

Anyone have experience driving up and down steep grades on paved roads with HST CUT Tractors? I mow 2 locations that are 5 road miles away from each other. The road separating the two places is a asphalt coutry road that has a couple of (my estimate) 16 percent grades that are about 600 feet...

Looking into purchasing a two axle enclosed trailer "bumper pull". The size range will be between a 7 to 8.5 foot wide and a length between 16 to 26 foot with inside height from 6 to 6.5 foot. Will be towing 70 percent interstate highways and 30 percent county roads with speed limits 40 to 55...

Trying to make the decision on what width and weight box scraper to use with a Kioti CK30 with FEL and R4 tires (tires not loaded). The box scraper will be used as a rear ballast for the FEL as well. The rear R4 tires are just under 66 inches wide so expect a 66 would be the smallest width...

Any one have an estimate (or better yet a load cell, strong chain, and a fixed attachment point to test). Wondering how much hitch pulling force a Kioti CK30 HST with a FEL, Box blade, and R4s would do on level grass covered ground. The estimated weight would be around 4600 pounds (3100...

Would like to get a Caroni "Brush' Fail mower. I will be mowing weeds and tall grass up to 5 feet high. I like the reports on the TM1900BSC (75 inch) but only have 28 Engine HP/21 PTO HP so likely need to step down in size. The Caroni website shows a TM1600BSC (63 inch) but I do not see 1600...

Do the tractor manufactures keep repeating the purchase incentitives. Currently Kioti has a free FEL on the CKs and $3500 toward implements (including FEL) on the DKs. Bobcat recently had a free FEL and rebates on some models. Kubota has IIRC a low rate financing or a rebate on some of their...

Looking to purchase an enclosed trailer to haul and winter store a soon to be purchased tractor, front end loader, and rear rotary cutter. The equipment will be used about 6 months of the year at home and vacant land that needs to be cut (5 acres to cut)a couple times a year to keep it from...

Anyone here use the Home Site forums. I usually check them for some of my interests and have not been able to load them for a few weeks. Have they ceased operation or having server difficulty? Thanks Wayne

How can one reduce or eliminate snapping turtle from a farm pond. The snaping turtles seem to be in large numbers with no natural predators to reduce them. I am thinking the snaping turtles are even killing the baby ducks that are using the pond. Any thoughts? Thanks Wayne

A raccoon has been visiting our trash cans and feasting 3 or 4 times a week. Plastic lid seems to come off real easy for him. Interesting in that most time he eats inside the can so little mess to pick up. Got a quick look him one night when I turned on the back light. Looks like the best...

I normally use Quaker State Marine grease in all my trailers to keep a common grease gun since one trailer is a small boat trailer. Lately I have not been able to fine a store in OH/MI that sells it. Does anyone know if it is still available and where to purchase. I checked on Quaker State...

Does anyone have the link to the Kubota B series pricing site that would give the MSRP price and suggest a "good Price" and "great price". As I remember a TBNer had compiled it. Thanks Wayne

Last I heard the CK20 were in transit from manufacturing plant. Are they in customers hands being used yet? Do many dealers have them in stock?

Any information when/if Kioti expects to expand the use of HST past the current soon to be available CK20.

What other Tractor Brands and Models do you see the CK20 competing against? From other posts it looks like the CK20 with 4WD and HST will have MSRP list for around 10,600 USD. Any thoughts what the discounted cash price will end up for those willing to order and wait?

I am starting to look into purchasing a CUT after a few years without one. I have looked at the specifications for the following: NH 33D, Kubota L3130 and 2910, and JD 4410. I was surprised to find that only the JD uses a direct fuel injection engine. Both NH and Kubota are still using...