Search results

They did the 50 hour mainenance for free. included in price of tractor

I have one too!! Just be careful throwing splits in when it's really cold. The plastic tub gets brittle and can crack with a heavy hit. The dump feature is nice too!

Project Farm to watch

Thanks just ordered Yesper jump start

Found these on amazon

try 1920 manual here

Yes that was it! Thanks FOP for the original info. I found more info to add to it. I needed the inner air filter.Went to check and clean air filters and guess what... When dealers did last service they didn't have inner air filter (backordered even now) so they just left space empty. This was...

2025 tractor time for oil change I used a bobcat filter but found this info on tractor by net(can't find who posted it now. Not all my research but might be useful in a pinch ..................... Engine Oil Filter: Bobcat 7384298, Daedong E6201-32443, Purolator One PL10193 (extended life...

I make them differently now. Still have some of the original ones left after all these years another thread

Might have been me... I was looking at what others on the forum were doing with firewood and did not see any racks made this way. The stone quarries use a similar setup, although it's smaller to handle large flat stone. I thought I'd modify it for firewood. Just add a couple of 2x4's to a...

Engine Oil is CK4 (suspercedes CK3 - for diesel) Hydraulic / HST oil is GL4 and cross-references to Mobile 424 (specialized additives 10w30 for hydraulic) Manual allows engine Oil based on temperature range: 10w30, 15w40, or 5w40 full synthetic (hint: Mobil 1 Delvac ESP full synthetic...

Some things I made using racking the 2 sections with red circle are 11 ft wide and 8 ft deep

thought you all would br interested in results predator did really well

HF has a vertical shaft Predator engine that is a simple drop in replacement for an old Huskee. I did mine and was simple and quick swap.

Mine did the same last winter, Stall restart die repeat. Changed fuel filter. fixed it. keep an extra on hand now

from manual

first pic palletforks.com second pic palletforks.com

The same thing has happened to me many times. Told dealer about it. Tech came and said hyd pressure is up to spec in curl and lift cylinders. I noticed this when I had the 2035 machine here to test for a couple of days. did the same thing. I thought it was just me not knowing the equipmen. No. I...

Ok went out and took some pics First pic is tractors headlight then shut them off to check the led lights Second is 2 leds to front Third has rear work light on Last 2 show viz from seat you can see from the intensity of the light that I have them really angled down and they still light really...

This thread got me thinking about needing more light for plowing in the winter. Ordered lights and wiring harness. Harness was way too short as sold. Needed an extra 13 ft. Of wire to go up Rops and forward to front of canopy (made from an old Jeep CJ hardtop that I cut up and repurposed). Super...

Be sure to test the bullet connections for power before you do anything. With my headlights on they have no power showing there is a work light fuse showing in manual pic but the 2025 fuse box is different without space for it.

Not a fan of stacking. Once I got my tractor things changed. I can't afford the metal totes ( $100.00 here) so I make mine out of wood pallets 42 x42. Almost all red oak. 3 pallets make a cord. I try to stack them 2 high. I can't lift a full one ( freshly split and green weighs 1630lbs) to the...

Bobcat does for no charge to you.Had it done in May.

I had the 50 hr service done in April. I have a HST so they did that fluid and filter too. When I called about it they told me engine oil only at 50 hrs but when I checked online it said a lot more/ Had to argue with the dealer/

Bobcat does for no charge to you. Keep the stuff you bought for next time and have them do it check attached pdf file

I had a ford 1920 for years and it could lift and curl the same wood skids effortlessly. When I tested the bobcat I thought I was doing something wrong and it would get better. NOPE! The Bobcat is still a really nice machine but the loader functions are flawed!

just saw this pic

I move skids of firewood with the loader and No it does not lift and curl well. The more weight the worse it is I have to lift. STOP. curl level the lift and repeat I even contacted Bobcat corporate down south. see below It does lift and curl a little when empty if you go slow enough Had it to...

Post #23 mentions WR Long. They are the best and custom make the quick attach to fit your tractor model. I did this with my old Ford 1920 and they were great to work with! Remove your old bucket and pin on new quick attach bracket to the loader arms. You do need to cut the tabs off the bucket...

Trying to help my elderly neighbor get outside. He's 84 and I'm 70. He loves puttering around with plants and gardening. suggested a couple of raised beds for planting. 5x11 2' high. Made with ground contact 2x12s 16 ft long. wow $71.00 each bought 8 online for pickup the next morning. went to...

I have a new bobcat 2025 tractor. Under 10 hours still. I had a Ford 1920 and I used it a lot to move firewood on skids! I did 2035 tractor to demo for a few days. When lifting a skid of firewood I would always start lifting and at the same time tilt the forks a little to keep the firewood...

I made a canopy for my Bobcat tractor 2025 model out of a junk CJ7 Jeep hard top. Removed broken glass and cut off sides. With a little sanding and painting was ready to go! Bolted it onto the ROPS with bolts from Ace hardware. Looks pretty good and will protect from falling branches too. I...

I made a canopy for my ford 1920 tractor out of a junk CJ7 Jeep hard top. Removed broken glass and cut off sides. With a little sanding and Ford gray painting was ready to go! Bolted it onto the ROPS with bolts from Ace hardware. The engine went and I gave the tractor to my brother who has...

Tractor won’t start I have a 1989 Ford 1920 tractor and it's been working just fine In the past I have replaced the clutch and have a thread on it here. Used the tractor the other day. Started normally, worked for a while. Parked it in the shed like normal. Went to start it up . Turned key and...

The parts from Messicks came today. Snap, snap,snap, took three minutes to replace and tractor started right up. Parts were actually less than those shown on New Holland website and they were different numbers too. Hope this info on TBN will help someone else! Thanks to all for advice and postings.

Ok I have a 1989 Ford 1920 In the past I have replaced the ignition switch with Ford oem switch and was fine The neutral safety switch was replaced a year or two later worked fine Couple years later usually after first cold spell or when tractor wasn't used in a while tractor wouldn't start...

I've been using pallets like this for 10 years or so. The first pallet racks I made were built so I could take them apart and break them down flat as I used the wood. I still have the first ones I built this way and they work well but are too much work and cost to keep making. Can't beat pallet...

I have built several sheds from pallet racks. the one the tractor is lifting is 11' wide and 8' deep. If you look close- I cut the upright down the middle and reattached using treated 2x6 screwed to metal crossmembers. 6' high in back and 8' in front. very easy to move around using 2 4x6's...

I keep this picture of a coupon in my phone and use it every time I go to HF They look at pic and type in coupon number Its good for all of 2016

here you can see the tractor split and the driveshaft is detached at the rear and still attached to the front

this is the rear portion if the driveshaft for the front axel removing the 4 bolts will allow access to the drift pin that has to be tapped out to allow the shaft to drop away so the tractor can be split

Is there any way to test the switch I replaced it 4 or 5 years ago and now it seems to be bad again I used the tractor yesterday parked it and today no go! A couple of months ago I recall having to play with the F/R shifter to get it to start but all OK since then The part was not cheap and...

My brother had an old Jeep CJ hardtop laying around. I cut off the back window and sides. Made a nice even cut all the way around. Welded up some brackets. Didn't take long to do. If you look at the pictures I think I have the front angled up too high. I still need to finish welding and paint...

The chain snapped on the swingarm . I got a replacement from my dealer. Here's the problem the hydraulic cylinder is all the way retracted under the housing, I need to extend the cylinder to work on it. I bled off the pressureand tried to pull it out with a come-along-no go. Before I do...

I just came across this video and thought many would enjoy the modified Fordson tractor. Dial up modems will probably have trouble playing it. Snow Vehicle Concept (1924) Mike

I was looking at what others on the forum were doing with firewood and did not see any racks made this way. The stone quarries use a similar setup, although it's smaller to handle large flat stone. I thought I'd modify it for firewood. Just add a couple of 2x4's to a standard pallet. Cut some...

This is my first post on this forum. I have a 1989 Ford 1920 tractor.2,000 hrs I致e only had it for a short time and have used it for about 6-10 hours. I致e been moving sand with the loader and some light clearing of weeds nothing really too overgrown. The last day or so I noticed a lack of...