Search results

Got this off eBay recently- all hooked up to the MM252 Dying to try it... Sent from my iPhone 5s 64Gb using TractorByNet

No affiliation or interests in this just sharing https://www.millerwelds.com/holiday Sent from my iPhone 5s 64Gb using TractorByNet

My 3pt snow removal blade was getting pretty sloppy so... I took it apart and fixed it! I started by drilling the elongated holes oversized and sleeved the pivot points adding a grease zerk. Here are some pics Sent from my iPhone 5s 64Gb using TractorByNet

Anyone have experience with these? Powerfist SMART TIG AC/DC-200P Inverter Welding Machine | Princess Auto Thanks Sent from my iPhone 5s 64Gb using TractorByNet

Not a huge project here but was definitely needed! I picked up and installed a wall track storage system in the shop to get things off the ground and hung up where they are out of the way! The panel is 4x8' made of a thermoplastic material that is reinforced and snaps together. The fasteners...

Know this is not the answer for heavy fab but seems like a better solution than fitting and welding on a concrete floor. Opinions from anyone that uses one please! http://pages.ebay.com/link/?nav=item.view&alt=web&id=231423809856 Sent from my iPhone 5s 64Gb using TractorByNet

Merry Christmas to all on this fine forum! Sent from my iPhone 5s 64Gb using TractorByNet

Nyone hear or try one of these? I realize it's Chinese but for $650 with the features seems pretty good! AHP AlphaTIG 200X 200-Amp IGBT AC DC Tig/Stick Welder with Pulse 110V and 200V - Power Welders - Amazon.com Sent from my iPhone 5s 64Gb using TractorByNet

Anything new regarding this? Welding web member posted that it was possible! Sent from my iPhone 5s 64Gb using TractorByNet

Purchased two lengths of used Ibeam that I will be splicing together. This beam is for a trolley and small chain fall to help lift my b2920 implements to an acceptable working height. Max 500lbs. Total span will be 15' when spliced. Pieces are 11' and 4' Beam is 5" by 3" by 1/2" thick Here...

Fireflaker Any update? Sent from my iPhone 5s 64Gb using TractorByNet

Here are some pictures of a shooting bench I built a few years back. PT 4x4 PT 2x6 PT 2x4 1/2" Galvanized carriage bolts Deck screws All PL's together Benches swivel to allow you to get comfortable Took measurements off of a local shooting range Thanks for looking Sent from my iPhone 5s...

Poking for the name of the attachment that is a drawbar but also hooks up to the top link. Cannot find it online and I need a name to order it Thanks Sent from my iPhone 5s 64Gb using TractorByNet

Anyone know what my b2920 is worth? 535hrs Industrial tires Sims cab with heater No loader but harness for front mount plow/blower Thanks Sent from my iPhone 5s 64Gb using TractorByNet

Does anyone have the parts schematic for the b series mid mount mower? Specifically the linkage that connects to the 3pt hitch to the mower. Thanks

Looking at upgrading to a B2650 or B3350 from my current B2920 Cons with B2650 vs B2920 1.5hp less on PTO Pro's with B2640 vs B2920 A/C Factory cab Position control on 3pt hitch Telescoping stabilizer links on 3pt hitch Bigger tires Heavier tractor Cons with B3350 vs B2920 DFP Greater...

Hook up the 60" box blade (450lbs) to the b2920. No issues; park overnight. Next day raise the BB and it will not lower! Checked the 3pt hitch open/close valve between legs is fully open. Will go up but not down. Here is the strange part. If I shut off engine and try to raise then lower...

http://m.northerntool.com/mt/www.northerntool.com/shop/tools/product_200445937_200445937?tab=video-link&utm_source=Email&utm_medium=Top10_062614&utm_campaign=consumer_062614&utm_content=P6&cm_lm=ericher69@hotmail.com&STATE=NY&HOT_MEM_CODE=&MARKETCODE=&om_rid=AAbsRl&om_mid=_BTrBleB864DcRy Seems...

GM Recalls Cause 10 Billion Class Action Lawsuit Sent from my iPhone 5s 64Gb using TractorByNet

Here are the results as promised from the HST broken fan survey (a little later than planned) https://surveymonkey.com/results/SM-7DJPXY78/ Sent from my iPhone 5s 64Gb using TractorByNet

http://www.slate.com/blogs/future_tense/2014/03/23/nor_easter_bomb_fujiwhara_effect_why_the_forecast_for_tuesday_s_storm_is.html Sent from my iPhone 5s 64Gb using TractorByNet

Believe I fixed the glitches. Please fill out the short survey. I will post the results in a month. Hopefully this survey will determine if extra fan protection is needed or is it a waste of money. Thanks Eric https://www.surveymonkey.com/s/GWM8T7T Sent from my iPhone 5s 64Gb using...

Hopefully this is one of the last major snowfalls of the season; but in the mean time lets see some of your pics/videos of snow and snow removal. Should keep us sane till spring time. Sent from my iPhone 5s 64Gb using TractorByNet

Anyone have a good place to buy an ALL copper 300A ground clamp? Checked eBay, Amazon some LWS and cannot find one. Plenty of brass or partial copper cast clamps Trying to replace the stock clamp on 252. Thanks Eric Sent from my iPhone 5s 64Gb using TractorByNet

Discovered the following while searching for the relationship of Volts and wire speed on the weld bead with MIG welding. This more than answered any questions I had Thought TBN members could use this for learning/reference http://www.esabna.com/EUWeb/MIG_handbook/592mig7_13.htm Sent from my...

Every Christmas to all fellow TBN members!

WEll as the ice storm wraps up I go out to clean off the wife's car and back the truck into the shop to thaw out at 70 degrees overnight. Anyways my neighbor is having her driveway cleared for free again and I over hear the blower operator asking where she wants him to put the snow. She says...

Took this an hour ago. Fresh snowfall overnight; good test for the new blower. All I can say is WOW!! http://youtu.be/Lf0whm0B_3Q

Co-worker asked me to fix his snow blade for his 1/2 ton. The adjustment holes where well worn/elongated, things where bent and twisted I started by measuring a few things. Picking up supplies and diving in. The following pics are of the plow as is

I changed the hydro oil and filters. Added 15L of super UDT ran it at 2000RPM for a few minutes and shut down. Next day checked cold. Way over full!! Ran again and drove it around the yard. Parked and rechecked the next day. Way over full!! Is the capacity less than 15L or did I not get...

Our local TSC had a 20ton shop press on sale 4 months ago. Regular price $449+tax for $249+tax. I finally received it yesterday after calling the manager last week to see where my press was. Anyway I assembled it yesterday and will be modifying it to accept a Mastercraft Air/hydraulic 20 ton...

I had a buddy ask me to help him fix a broken steering part for his lawn mower. Piece appeared to be cast steel. Attached is the repaired part. (Deleted broken pic oops) Anyway tried with Nomacast rods (tacks didn't even hold) and then used the mig. First bead; arc was erratic almost...

My 60gal 6.5hp compressor is in a tight corner therefore I had a hose made to replace the stock 1/4" pipe plug. As you can see from the pic a ball valve is at the end of the 36" hose with the original 1/4" pipe plug as a redundant safety. Should not have any issues now changing the oil twice...

M-25 gun and accessories Yes sadly it does say assembled in USA! She is one sweet rig. If the LWS is closed tomorrow I will maybe attach my .045 flux core and reverse polarity to give her a go.

Looking for a good used kubota la364fl loader complete with frame and bucket.

Looking to replace my Lincoln SP170-T with something with a bit more umph and aluminum capable. Was looking at the Millermatic 211 with spool. Besides increased duty cycle any advantage to 212? Would really like the 252 but cannot justify 3x the price for my home use needs. May build a small...

Have the chance to buy a like new (never used) 60" deck for a b2920. $1800 Canadian funds Good price or pass? Thanks

Have a chance at a good used la504fl Could this made to fit a b2920? Thanks

Have a chance at a good used la504fl Could this made to fit a b2920? Thanks

Looking at a used Power Mig 255. $1400 Canadian funds What are the main differences between the 255 and newer 256? Spool gun performance for aluminum? (Doesn't come with one but would add one) Any and all opinions welcome

Picked it up today 60" 2 replaceable cutting edges 462 lbs Looks pretty good for the price $449+tax Can dollars

How hard is it to uncrate and install an la364fl on a b2920 that has never had a fl installed? Dealer wants to charge $150 plus float fee A little info 2008 Kubota b2920 Front mount blower with quick hitch Sims cab All the holes should be pre drilled/tapped on the frame? Thanks for any help

My 10lb spool is almost empty and was wondering if anyone had a recommendation for a good wire .030 to run with CO2 on a Lincoln SP170-T Garage is only heated when worked in Huge temp fluctuations from -30 To +30 Will try and remove the spool when done and seal in a bag but will probably...

Thought you guys that need roadside mailboxes may enjoy this!

I am looking at putting up some PVC fencing up this spring. Any brands or styles that are better quality or offer a good warranty? Should be at least 6 feet high with 6x6 posts Approx 300' to erect. Have a PHD just not sure how installation friendly these are. Thanks for any suggestions

So I decide to go price out some Generators yesterday. As I walk up to the Sierra I can hear the fan/blower motor running (was raining out and engine not running) truck had been parked for the night. I proceed to start the truck with my remote starter while loading up my son. As I am securing...

I would like to build a man lift/elevator with a 1000lbs capacity. I have been looking for a used palette lift but haven't seen one locally for over a year. Shipping is cost prohibitive. The attic opening is 4x6' and the total lift height needs to be 9' The platform should also fold to save...

Anybody have any experience with Hyundai Generators from Walmart; more specifically the 7250W 13hp model? Save your breath if you are giving your opinion and do not own one! I am a home owner in an urban center and require occasional power back up for my home; 1-2 times per year for a few...

Finally got to try out my mod on my 51" front mount blower. Wings are 6"/side making the blower 63" Not a whole lotta snow but tested out nonetheless http://www.youtube.com/watch?v=miXal71knsA

Is there a float function when using the quick hitch and front blade on a b2920? If so how do you activate this? I can lift the front wheels off the ground and it digs into the black top (yes I have skid shoes) Thanks

Is there a float function when using the quick hitch and front blade on a b2920? If so how do you activate this? I can lift the front wheels off the ground and it digs into the black top (yes I have skid shoes) Thanks

Figure I would start it. You can nominate anybody including yourself; post fabrication experience, equipment, credentials, welding equipment and know how.

Does anyone know if I can mount the la364fl while not having to totally remove my front mount quick hitch for blower/blade? Did a quick search but no immediate threads covering my query! Thanks

I have the chance to purchase a well used b2782 front mount blower for my b2920. Has quick hitch and mid PTO kit Hydraulic rotation and deflector. $1200 5k new. Seems like a good deal opinions and anything to check for? Imbalance rotor, bent auger

Anyone out there have a la364 that they wish to sell? Fits b2620-b2920

If you own an iPhone this App is free today! https://itunes.apple.com/ca/app/4x4-gyroscope-clinometer/id387614872?mt=8

I am looking for a good used 63" b2782 front mount quick hitch blower

Was removing an old aluminum framed window from my foundation. Crowbar slipped while prying up and my thumb ended up being crushed/smashed between the crowbar and the corner made of concrete. Damage; Nail smashed Laceration on nail bed (thumb almost cut in half) 3...

I have the opportunity to buy a used Powermax 65 $1200 Thing is there is no 220 service where the guy is and he is 1 hr from home Sounds like a killer deal (could be hot?) Was thinking of plugging into his 220v dryer plug to at least power unit on; wouldn't be able to cut with Any other...

Here are a few pics of my modification Still need to paint the bracket and test it out! Not claiming I have invented the wheel just my version of this simple oiling system. Tweaked the cut adjustments last night; looking good Also notice the Lenox Diemaster II blade with 6/10 variable tooth...

I I have an old wood cutting bandsaw that I would like to convert to cutting steel. Pictures to follow One problem; it turns way too fast! Here are the measurements Drive motor 1745rpm Drive pulley 1.5" Driven 7" Band wheel diameter 19" Band length 124" I found an app for my phone...

Check it out http://www.youtube.com/watch?v=L3j6HaAieEU&feature=youtube_gdata_player

Here is a few pictures of the vise (been painted many many times) as per thick flaking paint and different color chips. Bought this at a house auction for $8.00 Was thinking of ; 1. Degreasing 2. Sand blasting 3. Priming 4. Painting (but what color...) Here are my choices New Kubota orange...

Don't know if this is the proper term for these things? http://www.google.ca/search?tbm=isch&source=mog&hl=en&gl=ca&client=safari&tab=wi&q=axle%20spring%20seats&sa=N&biw=320&bih=306#i=9 Anyway need to weld some on a 3500lbs drop axle for a trailer. Any special considerations or prep I should...

Hey guys; Have been looking at these how to vids for a while now and believe anyone can learn from this guy. I am not a pro welder but have enough experience yet I always seem to learn something from this guy! www.weldingtipsandtricks.com I have no affiliation to this site; only believe it...

Ok I have the opportunity to buy a cottage/camp on a 5 acre parcel with 1 small pond and a bigger pond/lake (don't know the size transition from pond to lake) Anyway the structure was built around 1990; 2 story Basement 2 washrooms Kitchen 4 bed Around 2000 sq/ft I can purchase this for $40k...

Used b3228b sweeper no brushes 1. Will this fit b2920 2. What is it worth without brushes? Thanks

I was wondering if any special prep/work are required after sand blasting and before priming? In the past priming/painting after blasting has led to rust within a year! Am I missing a step? Any advice from pro painters would be appreciated! Thanks

So I got a few quotes to remove asphalt, dig out the old base and repave... 10-12k for a double drive 120 ft long Ridiculous! So I was thinking of doing the base prep myself renting equipment Anything to look out for before I start down this path?

Princess auto (HF) in USA has a 60" box blade for $499.00 Anyone know the make and weight? Thanks

Looking at a plasma Was pricing Hypertherm but way too $$$$$! I'd like your personal experience with everlast products Thanks

Here is a pic the tractor with bx2760a blade with hydraulic angle and skid shoe kit

I was looking at my front mount blower and wondering how to take off the chain cover at the back of the blower when I put my fingers under the protective cover I came out with bearing shrapnel! I take the cover off and discover that 1 of the 2 bearings holding the center fan shaft had failed...

Well I picked up a bx2760a blade to mount to my b2920 quick hitch It was in very good condition. They sell for $1600-1700 plus 13% tax locally new. Here are pictures as purchased used. I will refresh it with some paint and a once over The last pic is of the 90 degree fittings that I...

Bought a used 60" blade for my kubota Should I drain the oil from the cylinder and lines before attaching to my tractor so as not to contaminate my oil supply? Or am I being ridiculous?

Here's my problem Front blower 51" Rear blade 60" 4.5" overlap/spoil on back per side Was thinking about wings but... Has anybody ever widened a blower? I was thinking of just buying the front shafts+augers and widening the working width to 63"! I called the dealer for a 63" blower and...

42" for $140 48" for $160 Good price used? Also Which would be better suited to kubota b2920 Thanks

Can get this blade with hydraulic angle and skid shoe kit for $1260 can funds It is to fit my b2920 Good price or not? Quick hitch not included I have already In the area new is $1400+13% sales tax Thanks

Please check out the following video http://www.youtube.com/watch?v=2uLBlSThbJ0&feature=youtube_gdata_player Just found it today and had to share with the others Great Job Paul!

WHatis the Hypertherm 30 real world capacity from owners? Not published numbers Thanks

Looking at trading my Lincoln SP170-T on a Millermatic 211 Could owners please report on the following; 1. Quality 2. Value for $ 3. Mild steel performance 4. Aluminum performance 5. 110-220V performance/flexibility 6. Flux core performance Any other usefull info My main use will be home...

Have an enclosed floor model blast cabinet Just wondering if crushed glass is a good alternative to silica sand?

Here are the pictures originally provided to me by Paul? Repair Specialties I have obviously adapted to fit my application but you will get the main plans Hope this helps

Ust need to know what kind of price this would fetch in bad shape (rusted not bent) and good shape used but repainted Don't know what model it is for Thanks

4x4 Gear 3 spd hi/lo Front hydraulic blade Rear finish mower Gauges; tach only working 3pt hitch drops after a while Turf tires 1100hrs How much is this worth ?

In the market for a plasma cutter Considering Miller 375 or Hypertherm 30 Any plus or minuses between both? Thanks

Looking at a craftex metal lathe 13x24 in $1400? Good machine and price?

Looking at a used Miller Econotig 150 Comes with bottle regulator/torch and cart how much should this go for? Seller is asking $1500 Canadian currency Is this a good machine? Have a 230v mig and 225 ac/dc stick already Thanks

AM looking for a good used unit Doesn't need to be immaculate I am willing to put in time and money to refurbish! Price is more important than condition

What is a fl60? Will try and post a pic... My guess is either a tiller or flail?

Considering cutting down my 60" rear blade (mostly used for snow) down to 54" Reason; front blower is 51" and I get lots of spoil now Will still need some blower "wings" but will only need 2-3 inches per side compared to 5-6 inches per side now Tractor is kubota b2920 (1500lbs dry weight) not...

Does anybody know of a skid plate kit available for the underside of the b series tractor? Contacted bro-tek but no kits available yet I like the design for the bx series Has anyone built their own? Any pics?

I was moving snow the other day (rear 5ft blade) with my b2920 with 51" front mount blower engaged. I started smelling this burnt brake type smell...I have a cab on the tractor. The tractor was in 4wd med range spinning all 4's and grabbing traction. Didn't notice anything out of the norm...

I'm looking at a Dearborn 10-10 2 furrow plow and the guy is asking $400 canadian dollars...will not budge on price. It is all intact and not bent. Also there is minimal wear on the furrows. Anybody tell me if this is a decent price? Any responses appreciated Thanks

NIce job on the restore and congratulations on a fine machine! Attached are pics of an 1986 Case 448 that I recently restored from the ground up. I do have most attachements and the whole package is for sale. PM me if interested.

Don't know if anyone out there has tried this but would it be feasible to "copy" the kubota Bseries loader?? At $4000.00plus from the dealer I do not plan to spend this $$ as I could use it other places ...but would really like a FEL I have a coworker that has the same machine with FEL and was...

I was getting frustrated by the snow spilling past the blade all the time so I measured and made templates for the rear blade contour. I then transfered this to a sheet of 3/8 steel plate and cut out. I then took a piece of 2" 3/8 thick flat bar and bent to the countour of the blade (2 per...

Just wondering if anybody knows of a replacement (wix, fram etc) that would fit the B2920. I'm at the 100hr mark and need to change engine oil. Thanks ericher69

Just need a price check on the following; 2005 BX23MLB HST KUBOTA LA210-1 and backhoe is a factory KUBOTA BT600. 283 hours...don't know if ags or turfs Thanks ericher69

Could anybody let me know if asking price of $1500 canadian/ $1200 us is a good price for this tiller used? It has a slip clutch and would be for my b2920 Thanks ericher69

I need an opinion on what the following is worth; 1 bx1500 with turf and 200hrs 1 loader with ballast box 1 4ft. kubota tiller approx. price for whole unit in u.s. funds thanks ericher69 p.s. don't know year but older style hood

Noticed oil leaking...smelled it and smelled like diesel. Wiped it up. Today another puddle...upon closer inspection found the front axle drain bolt left side was loose and leaking fluid! Tightened and checked the other side. Should this have been cought in the first service at dealership...

Please provide any feedback good/bad about the Work Saver Post Hole Digger. It comes with a 9" and 12" auger. $500.00 Canadian currency. About $400 u.s. This will be to run off of my B2920 Thanks ericher69

Anyone out there know if the BH75 from the b30series will fit the b2920. And no buying a bigger machine is not an option!!! Just looking at my options before shelling out 7-8k for a backhoe not much more capable than a bx series backhoe. Will it hook up??? The b2X20 series takes the kubota...

Does anyone know how much a John Deere seeder/fertilizer would go for. It looks pretty rusted and I don't even know if it works but am willing to try and get it going if I can find out the value in $$ Sorry no picture buried under snow at the moment ericher69

Does anybody have on of these units either from K&N or Air Raid etc. Just wondering if it would provide just a little bit more power but more importantly you would never have to change it again! Of course I would get the pre-filter for dusty conditions ericher69

How can I find out what the fair value for a deere 2 row seeder/fertilizer? Don't have the exact model yet but it has 2 steel wheels spoked at the back and 2 cans per row up on top. This implement is in rusted/seized conditon right now. ericher69

Any Kubota mechanics out there know if full synthetics are available for all fluids on the new b2x20 series and if so when would a good time be to switch from the standard fluids (hrs. on meter) Thanks ericher69

Hey guys, Attached is a picture of the switch mount that I made up for my electric shute delfector on my front mounted 51" industrial blower on my b2920. All controls are at a fingers reach...works very well. Actuator is from Frigelli auto out of california.

Anybody know if the Bseries comes with an alternator or magneto? Seems to me the specs say 35amp alternator...but dealer says magneto! ericher69

This is some video that I captured yesterday while removing a fresh 8-10" snow fall with the B2920 51" industrial front quick hitch blower with hydraulic shute rotation and electric shute deflector SIMS cab with heat and strobe. The cab is also wired with 2 front mount 55W spots and 2 Rear 55W...

Used the new B2920 today with SIMS cab/heater/wiper for fresh snow removal...wow! Doesn't even break a sweat. Now is "3wd" active in reverse also? or just forward direction? Yes it was engaged fully but did not seem to be spinning the front tire when the rears where spinning. ericher69

Does this make any sense? The HST drive does not work when the clutch is depressed on the B2920! Released the clutch and bingo! Is this a safety feature? I thought the clutch was for the pto engagement only ericher69

To anybody with the answer or a shop manual... Is there a special technic to refill the rad on the B2920 (I've installed a cab from SIMS with heater)? Or is it just run and add as needed? Thanks ericher69

Anybody know if this tractor is available?? I have not found it on the official website (US or Canadian) but have found this link. Kubota Adds Versatility, Power and Productivity to Popular B-Series Compact Tractors

Does anyone know of a manufacturer for a front end locker to get TRUE 4wd on these tractors? Something like a Detroit Locker or ARB Locker? Thanks ericher69

Just thought I'd post pics of the new cab from Sims for this awesome new machine. They did a great job very roomy also.

Just thought I'd post these pictures of the new cab that will be available shortly from Sims for this awesome new machine. They did a spectacular job!

Can anybody shed some light on this...kubota website lists tractor weight at 1554 lbs. http://www.kubota.ca/flash/b_series/pdf/b_series_spec.pdf Now I was looking at the ROPS this a.m. and found the tractor specification plate near the right rear tire on the ROPS and the plate states that the...

Just wondering what the actual hydraulic flow that is available to run an implement if the hydro is in neutral. The total pump output is rated at 8.3 gpm...is that the flow available through the rear remotes?? If Anybody that knows please chim in Thanks ericher69

How much for the rear remote hydraulic kit for this machine?? What kit number and is it a do it yourself project?? Thanks ericher69

Anyone out there know if there is a break in period for the kubota b2920 engine? Yes I will read the owners manual but any ideas on how to do this or if it is even necessary? Thanks ericher69

Any body know what type of flow would be required from the pump to run a backhoe mounted jackhammer on a compact? Thanks ericher69

Anyone out there have a solution for the deflector on kubota snowblowers? The dealer wants $500-600 for an electric one...ridiculous! If anybody has pictures of their setups it would be welcome before the white stuff starts flying. Thanks ericher69

Hey guys, I need your honest opinion about the extra $$ for 3 hp on the b2920. I will be doing residential snow removal with a front mount 51" blower. I was looking at the b2620 but for $900 more I can get the extra 3hp... This question is for anybody that owns and uses a front mount blower...