Search results

Does anyone have access to to the wsm for the b2320? Kubotabokks.com has the ops manual but not the wsm. I pretty much clicked on most of them and none of them referenced my tractor. Thanks

Thanks guys. I thought they would be. I was hoping for a Christmas miracle 😁

I don’t know why it looks all weird. Basically I’m looking to see if anyone knows where I can get a loader and a cab roof for a b[emoji639][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji639][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]

Anyone know where I can get a used LA [emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji639] loader and/or the roof for the cab? I bought the tractor at auction and before I picked it up, the roof panel “went missing”. I would love to buy a loader for it so...

I just picked up a b670 backhoe and would like to attach it to my b1750. It came with everything except for the rear hangers. Does anyone have the measurements so I can make one and modify it to fit a b1750. I could really use pictures as well. Thanks.

How hard is it to replace the clutch and the seal on a B2150 HST? I just bought it and it leaks hydraulic from a seal and the clutch is stuck engaged. I know I have to split the tractor and I do have the work shop manual. I’ve done it on a 7100 and it wasn’t that bad.

never mind. I found a video on youtube and the connections are correct

I have a kubota B1750D tractor with 1650A loader and I’m trying to figure out how they connect to each other. I bought this used and in pieces and I’m trying to rebuild the tractor. The way it’s setup right now doesn’t make sense to me and I’m wondering if it’s setup correctly. I have color...

I just picked up this tractor few months back. It was labeled as a “project” and It was taken apart and left for a decade or so. I’m guessing it had a broken transmission piece in the shifter that they had taken apart to fix. They welded it but couldn’t figure out how to put it back together...

So I took a trimmer line and tried pushing it up the hose and it didn’t seem to go that far. I had started taking the gas tank off and I decided to try a coat hanger before taking the dash apart. I pushed the hanger up and I encountered the obstruction. I pushed on it and lo and behold gas...

when I disconnect the hose at the fuel filter coming from the fuel tank, should the fuel be flowing out or just dripping out? Mine has a slow drip and I'm wondering if that's the reason I can't the tractor started. It's starving for fuel. What would cause it to do this? I blew compressed air...

Thanks for the responses. I downloaded the WSM, owners manual, and parts manual from the forum and none of them show you exactly where it connects to. They took pretty much every bolt out and through it in a bucket. I’ll try to find the bolt that matches the location on the trans axle and hope...

Does anyone have a picture or a diagram of where the ground (-) terminal gets connected on the tractor? I bought the tractor apart and I'm trying to put her back together but I can't figure out where the ground goes on the tractor. Yes I know one end goes on the battery, I need the other. Thanks.

I kind of figured it wasn’t possible. Oh well.

I have a b1750D manual transmission 4WD and a b7100 HST 2WD tractors and I was curious to know if it's possible to make the 1750 a HST using the transmission from the 7100? I don't know if it's possible but I'm curious to know how hard it will be.

this website has all the diagrams and part numbers for the 1750 tractors. https://ku-part.com/kubota/catalog/b1750d-64/

Anyone have a diagram, a drawing, or a good picture of how the parts go together in the top case cover?

I deleted last post by mistake. Anyway, does anyone have a detailed diagram on how to put together the top case cover with the forks, levers, etc. I have the WSM, parts catalog, and owners manual but none of them show how the parts on the case cover go together. The last owner took it apart...

Never mind I found it. it was at the end of WSM.

I bought the tractor and now I need to find the service manual. Anyone have access to the service manual for the b1750? I downloaded the WSM, parts and Operators manual but they don't tell me how to service the machine. Any help would be greatly appreciated.

It has 903 hours on it. I haven't looked at it yet, but I was told it everything else works fine with newer tires on it. Its a none driver right now. How much did the dealer charge for the MF2660?

I'm looking at buying a 1750 with a loader that has a transmission that keeps slipping out of gear. It's not a HST. Anyone have any ideas why it would pop out of gear? They are selling it as a "project" tractor and the asking price is $4500. Is there anything I should be looking at when I go...

I finally started putting things together and I noticed that the previous owner had put the wrong seal and was missing one of the gaskets. Anyway got the clutch on and will continue putting it back together. I'll add more pictures soon.

messicks has the gaskets and the seal I'll need to order them on monday gasket 15263-04360 $5.25 75261-04820 $6.43 Seal i have to call to get the correct size based on serial number 09560-00007 $13.48 19215-04460 $42.19

how would you degrease the clutch? brake cleaner? it looks new and to get another one is $175.

so took the clutch housing, flywheel, and the bearing case cover off and it looks like someone has been in there before. the seal looks pretty good and it doesn't look like it's been leaking. It looks like they put gasket maker around the bearing case cover where it meets the engine and that...

there' no hole about the throwout bearing and I can't see how oil is coming in other than the rear main seal. I think my best bet is to just take the clutch housing and the flywheel off and go from there. the oil that came out of the bell housing was black, like the oil in the engine. Maybe...

update so i looked underneath the transmission and its just a shaft going from the hst to the bell housing so where is the leak coming from? im confused

Few more pictues

I just bought a b7100 for a really good price that was being sold as a non runner for parts/repair. The pervious owner inherited the tractor and couldn't getting it running so he decided to sell it. He had spent 3 weeks trying to get it going thinking they had done everything possible. It...

anyone know where I can get used 4100 rear fenders?

more pictures

I just bougt this flail mower at an amazing price and I'm not sure of the model. I'm thinking it's a Mott. Any ideas? Also, the PTO shaft that came with it doesn't fit my John Deere 4100. I went to Tractor Supply to get an adapter and they didn't have anything close to the size. Does any...

I have a 4100 and I'm trying to remove the adjustable draft link from the pivot shaft. The manual says 1. remove lynch pin from pivot shaft. 2. slide shaft to side and remove adjustable draft link and draft arm. My question is which side do you move the shaft? Do I take the tire off and move...

I traded an old Jeep for this tractor that had been sitting outside. It was at a metal scrap yard, I'm trying to bring it back to life. It runs great even though when I first got it, the 3 pt attachment wasn't working. Anyway, here are some pictures.

Anyone have an idea where I can get some reasonably priced used rear fenders for the 4100? The new ones are above $600 each and I can't afford it. I just recently got tractor and I'm trying to bring it back to life.

I bought a used 4100 but the lift arms will not go down on the rockshaftand I can't figure out why. I've played around with the flow control on the rockshaft, I've added weight on the lift arms and it still won't go down. The 410 loader works fine with good downforce. Any suggestions would be...

I have a JD 4100 and wanted advice on which diverter to buy so that I can install a grapple. Artillian has a kit but I can't see spending $700 on it when I think I can do it for less than half the price. I've done a search but it gets overwhelming trying to read all of the posts. Any...

I just got a 4100 and I'm interested in installing power beyond for grapple, etc. I've been doing research and I wanted to know if the tractor comes with the M808033 plate that you hook up the hydraulics to already attached to the SCV or do I have to buy one? I've been looking at the kits and...

Does this diagram look correct? I'm guessing the 4 O-rings need to be replaced

I just noticed oil pouring out of the overflow (pcv) pipe and I can't figure it out why! The oil level and the fuel level hasn't changed. It's definitely seems to be oil that is coming out. I am stumped! It's not just dripping, it's like a faucet Help. could it be the hydraulic pump...

the bucket cylinder on my kubota 1630 loader is leaking when fully extended and I was wondering how difficult is it to replace the seals? I would like to do it myself. I'm very handy and I don't know if it requires any special tools or skills. local dealer and hydraulic shops are asking "at...

I have an opportunity to buy a Woods 750 and I was wondering if it's too big for a b6200? Its a 3-pt attachment. Thanks

Hi, I'm looking for the chrome retainer nut for the ignition switch and the air cleaner assembly and hose for a Kubota b6200d

I picked up this tractor for $1000 in nonrunning condition. After cleaning out the fuel system, replacing the stop and compression cables, and giving it a complete tuneup I got the machine to fire up. The only issues with it is that the previous owner (an old timer) used the loader to mix...

I finished rebuilding the front end of my father-in-laws Yanmar Ym147D and I thought my experience could possibly help someone in the future. includes pictures of a tool I made to install the seal collar on the final gear. I installed the tires and rims he bought after I painted the rims. Gave...

I recently bought a b6200d and I need help with the ignition switch. The one on the tractor is missing the chrome retainer nut and my local Kubota dealer will only sell me the whole ignition switch and not just the retainer nut. Does anyone have any extra ones or any ideas of what I can use as...

My father-in-law and I have a little disagreement. He says that it has a category 0 and I say it's a category 1. Could anyone shed some info?

Hi, I'm looking to find rims or rims and tires for a Yanmar 147D. The one on the tractor now is badly rusted and you can see the inner tube. I've been looking for a few months now and can't seem to find any. The tire size on it is 29X12.00-15 on the rear and 20.5X8-10. I wouldn't mind if I...

I'm looking for rims for my Yanmar 147d. I have turf tires on it now.

Hi, I'm looking to buy used/new rear rims for 29x1200-15 tires. The ones I have are very rusted and falling apart.

I'm looking to find 2 rear wheels for my father-in-laws tractor. His rims are so rusted that you can actually see the inner tube. I can't seem to find any used ones around Rhode Island. Would any other brand/style work on them?

I have a JD 750 and the screw for the rod kit (basically a tie rod end) sheered off yesterday while doing some maintenance on the tractor. My local dealer is closed today and closed at 12 yesterday (go figure). Does anyone know the compatible part number so that I can walk into NAPA or...

I bought a used brantly backhoe and the hydraulic control valves are leaking. how would I take it apart so that I can replace the o-rings? I took it off of the loader and disconnected all hydraulic hoses. Do I just unscrew the bottom and push the rods through?

few more

and more

more pictures

Hi all, I just bought a Brantly MD8 backhoe for a great price and I need help trying to figure out how to connect it to my john deere 750. The person that had it before me had adapted it for a skid steer. I can do a little welding and I have a neighbor that does it for a living. I would like...

The JD750 is open center and I do not have any hydraulics in the back. I included some pictures. So the easiest thing is to add a QD and then loop it when I don't have the BH connected. I don't need any special remote valves or splitters or anything like that?

Hi, I just got a great deal on a Brantly backhoe that I want to put on my JD 750. Anyone have any idea's how I can connect it to the tractor? it does not come with belly mounting kit or anything like that. I'm going to have to build something to attach it to the frame but I don't know...

I have a JD 750 and would like to buy a JD No. 7 backhoe for the tractor.

what type of backhoe does a JD 750 use? I want to start looking for one but I don't know what to search for. If anyone has one, can you post some pictures of how it is connected to the tractor. Thanx

I finally got my 3rd function installed today. Thanks to Irsmun and JJ for all their help and guidance. It really wasn't as hard as I thought. The most difficult part was stopping all of the hydraulic leaks from the connections. I still have one tiny leak, but it's really hard to get to...

Does anyone happen to know what size hydraulic connection I would need for the PowerBeyond on the selective control valve - PC 1873. I'm trying to connect a 3rd function. Thanks. Does 5/8's make sense?

I have an opportunity to get a new grappler for my JD 750 with a 67 loader for cheap. The grappler weighs about 800 lbs and it's 64 inches. would that be too much weight for the loader? the manual says the lift capacity is 800 lbs. I don't know what the weight of a 60 inch bucket is compared...

I'm looking for a quick attach adapter for my 67 loader (on a john deere 750) so that I can get a grappler. I have the pins now.

J.J. What do you think of this? Is it overkill?

Hi Ted, What size grapple would you recommend for a JD 750 with a 67 loader? I don't have the quick connects. They are the old fashioned pin connections :( Also, I live in Rhode Island and I was wondering if that qualifies for the free shipping? Thanks.

Does anyone have plans on building a grapple? I have a neighbor that's a welder and been unemployed for a while now and I figured I'd give him the money to build one instead of buying a pre-made one. He needs the measurements and drawings and stuff. Anyone willing to help an unemployed...

Anyone have a used/new 3rd function that will go on John Deere 750? I want to add buy a grapple and I need the hydraulics on the front of the tractor.

Hey all, I need help trying to determine what to buy. A pto wood chipper costs almost as much as a root grapple and I'm really having a hard time deciding what to get. If I get a grapple, i can pile up all of the branches and such and then rent an industrial chipper for a day and chip it away...

I'm looking for a used/new PTO wood chipper to use on a JD 750 (20 horsepower). I live in Rhode Island but willing to drive.

I finally got around to uploading pictures of the pole barn I built few years ago. The roof angle is more than I originally planned. My math was a little off. My wife calls it the "church." I still have few things to do on it, but never seem to find the time.

Anyone know the part number for the light switch on the 750? or know a place where I can get a good used one cheap?:)

My 750 fwd is not disengaging even after I release the lever. I followed the owners manual and checked the service manual but I can't figure out why. I changed the fluid and no change. Any ideas?

Okay, I just recently bought a 750 and I've been trying to replace the fluids on the tractor. It took me 4 hours to get the hydraulic filter off - i had to disconnect the whole filter attachment and then cut it off with a Dremmell. Then I tried to get the oil filter off and it won't budge...

I just bought a JD 750 tractor with a JD 67 loader and would like to purchase the service manual for the tractor and the operators/service manual for the loader.

I bought the tractor and I was able to get bush hog, a post hole digger, and a box blade for a REALLY good price. Now I need to get the hydraulics figured out. It does have power steering but not workind since it has no hydraulics power at all. I checked the fluid level, the filter and fluid...

I have an opportunity to buy a 750 4wd with low hours for $2500. Hydraulics on the lift running really slow. new turf tires. I'm thinking it's a great deal for the price. What do you guys think?

Hi, does anyone know the part number or where I can get a replacement filter element for my FEL? It's a 730 attached to a '68 Ford 3400. I drained the hydraulic fluid, all 10 gallons of it, and it was in sad shape. I don't know if the previous owners did any work on the tractor. I'm trying to...

Hi, I have a 1968 Ford 3400 in good working condition with a front end loader, new tires all the way around, new rims on the back wheels, wheel weights, hydraulic connections in the back. I would like to trade it for a used compact tractor such as a Yanmar, Kubota, or a John Deere. It needs to...

Hi, has anyone used the GRA secure set? I want to use it on my poles for my 16X40 pole barn. I live in RI and I'm going to set the post 4' in the ground and use the secure set around the 6x6 poles. YouTube - Fence Pole Installation Without Cement pt 2

would a backhoe from a 1969 ford 5500 fit a 1968 ford 3400? I might be able to grab one for $1000 and I need to know if it would fit.

I have a ford 3400 with FEL that keeps getting stuck in the soft dirt I have. Everytime I try to clear out or work on a patch of overgrown forest, the rear tires keep digging in to the dirt and then I have to go and get my trusty old truck to pull it out. My question is that the tractor came...

I bought a 1968 ford 3400 with a FEL and would like to add a remote hydraulic hookup for a wood splitter and hopefully a backhoe one day (if i can find a cheap one). Anyway, would this one on this website work on my tractor? I called them and they didn't know if it fit a 3400. Parts &...