Search results

I have a John Deere 3320 for sale. The add on fastline is here 25 John Deere 332 Tractor (1246253) Raymond Reeves Saint Cloud Florida | Fastline I'm located in saint Cloud Florida. What other publications and/or sites would anyone suggest to advertise this on excluding Craig's list which...

The seat suspension on my 14 year old 3320 seems to have had a nut come loose. The 2 pictures in the attached PDF file show the front and rear view under the seat in the middle of the seat suspension. You can see a threaded pin with a rubber grommet and the nut missing on the open end. The pin...

One would think that a pneumatic grease gun should not bring a grown man to tears of frustration..... but they both did. I own 2 one from Lowes and the 2nd from Harbor Tools. On the surface the problems I am experiencing seem to happen with both the same. No grease comes out ! Basically I pull...

I am looking at this lawn roller , how do I connect this to my JD 3320 ? It's not a CAT 1 3PT hitch attachment . What do I have to get to connect this correctly ? Ohio Steel Lawn Roller — Steel, 60in.W x 24in.Dia., Model# 60T | Aerators Lawn Rollers| Northern Tool + Equipment

My3320 rear PTO is leaking fluid. Has anyone changed out the seal themselves ? I am wondering how hard this is to do ?

Has anyone added a rocker switch to the switch panel located on the top of the right fender (as you are facing forward) on a JD 3320 ? I want to install a new rocker switch to control a new LED light bar but getting access to the panel looks like I have to remove the right rear tire. something...

Ever have one of those problems you try and ignore ? I have a 3320 it was 5 years old when I purchased it and now 5 years later I still cannot get the in line hydraulic filter off for cleaning. I cannot get this filter unscrewed. Now granted I haven't tried heating it up , any suggestions for...

I think I've made the decision to cut the lawn guy's visits and cost (375.00) per month in half. I have a total of 3+ acres of grass..... Lawn guy cuts the Saint Augustine 1 1/2 acres and does and excellent job of trimming and edging. I have another 2 + acres that's Bahia that he doesn't do...

I bought a case of JD Corn head grease after a suggestion from someone on here to use in the gearbox of my rotary mower. The sel leaks and I just don't want to fix it. I put the grease in the gearbox every now and then, the mower seems to work fine. If it last a few more years I'll sell it and...

I was looking at a 3rd function valve from Everything Attachments for my 3320 , has anyone installed one of these for their FEL ? Was it very difficult ?

Before I start winging this I thought I might ask. Has anyone measure the hydraulic pressure on a JD 3320 ? If you did how did you do it ?

I've upladed several photos. One will give you an idea of what the land looks like prior ro clearing it with the tractor. The second shows the model numbr on the loader. The third shows the piiston part of the cylinder that measures 1 inch,. So how would I go about measuring the hydraulic...

I was thinking about replacing the cylinders on my FEL to try and add some extra lifting capacity. Are the connecting ends of a hydraulic cylinder changeable / customizable ? Seems that this is going to have to be done for the replacement cylinders to fit the FEL ? I was going to go to a...

I own a JD 3320 I've looked at this switch for 3 years and have no idea what function it has and more importantly under what conditions I would want to use it ? Any help would be appreciated.

Folks, This just started flashing on the display. So far it doesn't seem to affect the tractor other than the speedometer and cruise control are not working correctly. I've read the owners manual so I understand what Error 06 relates too. My question is has anyone else had this happen and how...

Folks I have a 3+ year old 5' Howse Rotary Mower. The mower works fine except the metal is a little thin. The PTO shaft contains 2 sets of universal joints, one near the PTO output on the tractor and the other near the rotary mower's gear box. Visual inspection of each set of universal joints...

I use my cruise control to hold constant speeds as slow as .5 miles per hour. This used to work without any problem at all. Lately I've noticed my digital speedometer seems to be going up and down eratically. This seems to negatively affect the cruise control as it no longer holds a constant...

My second time hauling my JD 3320 by trailer occured this morning. Now I'm the type that has visions of my tractor falling off of the trailer while on an overpass and landing on top of a filled school bus being driven by a nun. Because it's my deep desire never to be featured on National News I...

Folks I just purchase a 3PH CountyLine PHD from Tractor Supply. This is the URL to the product CountyLine® Post Hole Digger - 2100220 | Tractor Supply Company Unfortuatel the product manual and assorted nuts & bolts were not included (missing). If some one has this item I have a couple of...

Folks, I have a JD 3320 and a 2004 Chevy Silverado pickup truck with a 6 cylinder engine. I want to size a trailer to haul the tractor to a place I do volunteer work at and to haul it to the shop for repairs. Both places are less than 50 miles. I know nothing about trailers. How do I start...

I'm going to replace a 150 yard 4 rail wooden ranch fence (post and rails). Fortunately the land it's on is very flat so I don't have to worry about an elevation change. 3 questions for those of you with ranch fence experience. 1. For a 4x4 post what size auger bit would you recommend ? 2...

Folks, I purchased a used JD3320 (2005 vintage) 2 years ago it had ~ 500 hrs on it. I change the oil ever 50 hrs or twice a year which ever comes first. I have no idea if the engine has sludge in it. It seems to work great. What symptoms would I experience if there was a sludge build up ...

Hello folks from Florida. I would like a recommendation for a liquid fertilizer and herbicide ( possibly a combination of a weed and feed) that I can apply from a sprayer ) for bahia. Would appreciate any suggestions .

Before I go and do something I may later regret, has anyone found an easy to tap into 12 volt DC source near the rear of a JD 3320 ? I'm trying to avoid cutting into a wiring harness. I purchased a 12 volt sprayer from Northern tool which is meant for an ATV. I have a carry all and will build...

I'm looking for a tool bin (maybe a tool cage) large enouh to hold my chain saw, chains pull straps, machete, etc. I was thinking that a "box" which I could attached to my 3 point hitch would be ideal. (Might be a good welding project). Anyone seen anything like this ?

You all got me thinking. So I went out to the shed tonight and took some pictures. Please take a look . I'm not even sure what model forks I own... Hope I uploaded the pictures directly

Got a FEL question for all of you. I was reading a post from another 3320 owner and he had several pictures of a pallet full of cinder blocks that he was moving around. I know my 3320 cannot lift that so I was wondering if there was some kind of test I could perform that would settle my "unfound...

Folks, I have a JD 3320 and 5 acres (about 3 acres need fertilization). The PTO Ag spreaders all seem way to large for these 3 acres. 2 questions: Anyone have a spreader recommendation which will work with my JD 3320 ? I was looking at the ATV spreaders offered by Northern Tool. Is there any...

My used 3320 / 300CX included a JD bucket. I found a label on the bucket which reads BW 14764 1550 HD BKT W/holes. Now there are holes along the bottom leading edge of the bucket. Are these for a specific model teeth or is a better way to go to just purchase a generic tooth bar which will...

I want to find a blue or other color dye to add to the gallons of roundup I spot spray for weed control. anybody what this dye is ? I tried food coloring and it doesn't work. What is it that they us on golf courses ?

I have a JD 3320 with a 300CX FEL. I parked it with the FEL 4 feet off the ground. When I came back the next day the bucket was on the ground. Tried it again this time locked in the barn overnight, same thing. Is this normal or a sign of a hydrolic problem? Other than that quirk the FEL...

I own a 3320 . There is a switch which cycles through different information on the LCD display. Anyone know what SHORT-D and LONG-D means ?

I purchase a home in central florida which included several acres of weed infested pasture. The pasture is supose to have bahia grass. It's there amoung the virtual plethora weeds....I started taking it back by applying a Lesco weed and feed. What does lime do for a pasture and when should it...

I own a Howse 5' rotorary mower (A Brush Hog). I've used this to cut down lots of grass and brush . The blades are not very sharp . I was wondering if sharpening these blades is something that other rotary mower owners routinely do or not.. thanks, ray

Doess anyone know how much weight a 3320 with a 300 loader can lift ?

I have a JD 3320 with a catagory 1 hitch. How can I hook up a Precision Products TCT15 to a cat 1 hitch ? There has to be some kind of adapter kit out there ? A picture of the TCT15 is located at Precision Products- leading manufacturer of tow-behind lawn and garden equipment

Purchased a 5' York Landscape rake. Got it home, it's still on the pallet. How does one man hook up a 300 lb rake to a 3 point hitch without help? I have no experiece with this implement it sure doesn't look like it will stand on it's own.

I have a small headlight wiring problem on my 3320 . I need to replace the first few feet of wiring from the switch. I need to remove the cowling on one side of the instrument panel to get at the broken wire. Has anyone removed the cowling before ? Is it hard to remove and then to put back on ?

I have a JD 3320 and am brand new to both this forum and owning a tractor. The 3320 has a 300CX front end loader. I own a bucket and a set of forks. I'd like to buy or build a simple non powered broom which I could use to sweep off my asphalt drivway of yard waste. I don't want to purchase a...

I'm brand new to tractors and land clearing. We recently purchased property in central florida which has lots of palmetto and god awful vines on some of it. I recently purchased a JD 3320 with a FEL and a Howse 5' bush hog to cut the parts of the property which are planted with bahia and weeds...