farm pro 2420

Wanting to know ,what oil to use in my transmission in my 2420 farm pro 2 wheel drive..

Does anyone know how to find a owner's manual for a 2005 farm pro 2420 2 WD

I have a farm pro 2420. When cold it steers ok but after an hour it doesn't work at all. Wheel just spin

My son just received a Farm Pro 2420 tractor. We were told it was a 2006 2425. I have searched the web for info on this tractor and can find nothing. You see the hood says its a Farm Pro 2420 4WD. Its printed on the hood. But I cannot find any 2420 4WD units. Also this unit appears to have...

Hello from Nova Scotia. I am in search of a Y380 short block for my Farm Pro/Jinma tractor. The story behind my tractor, I got it from an estate sale. The person who owned it passed away and the tractor sat outside of some years. No one covered the exhaust up and it filled the engine with...

I've inherited my dad's Farmpro 2420. It's been a great little tractor for 5 years. I can pick up 1200lb 4x5 round bails with no issues with the 3pt. The only thing ive had to do to it is rebuilt the hydraulic steering. Today while discing deer plots I lost all instruments. I had it happen...

Bought the FarmPro 2420 manual, but wasn't very helpful. Can someone please help me by telling me where the oil port is located? Is it here in the picture? Thank you

My tractor appears to have lost both power steering and 3 pt. Checked fluids and screen filter and both are good. Any help diagnosing what needs fixed would be appreciated.

I have a Frampro 2420 that I keep popping the tires. The tractor was down for a while and a bunch of badly thorny locust trees grew in the field I mow. Now wheneverc I mow I ended up popping tires. I've replaced tubes a couple of times. I am now considering getting the front tires foam...

I hope somebody will give me a little direction or outside insight. Please! I have freshly rebuild this little tractor last summer. Everything new but the block. It was meticulously build to the best specs i coukd obtain. Furthermore, It was used lightly and only a few hours this year. Never...

2003 FarmPro 2420 with 1999 TY290 engine. Was overheating when it was purchased but I figured I could fix it. Flushed block numerous times, replaced radiator, hoses, fan, fan belt, water pump...still overheats in about 15 minutes. Parked it for a while...fast forward a long while... towed it...

I bought this ol tractor a few months ago, the power Steering worked fine, the hydraulic fluid that was in it was black the filter was shot installed a new filter, I changed the hydraulic fluid with AW46 & now the power Steering doesn't work, I did started & let it run then I got busy & it sat...

I have a 2005 2420 Farm-Pro tractor with the Y-380 3cyl. Diesel engine and I have 3 manuals on the tractor but the only info on what Hydraulic oil just says 40 ? not sure how to understand that. does anyone know if the Standard hydraulic oil for other tractors will work or does my tractor...

Need some guidance if people dont mind. I'm at the point with my tractor to replace tires. They look to be the original and they are just toast. My issue is front tire says 4-16. Well long story short I cant find a 4-16 tire anywhere. Would it be ok to replace them with 6-16 or similar, and...

So reading through these forums I was able to diagnose a fuel issue last week and replaced sediment bowl etc. Tractor started up just fine this morning and have been working it for a couple hours. Well again the tractor died like it was choking for fuel so I went through and checked for bugs...

Hello all, I'm new to the forum and new to the chinese tractor. I replaced 1 of my headlight bulbs and the tach stopped working. If I unplug it the tach will work again. Anyone know what my problem is or have any idea? I bought the bulb from auto part store it looked the same and it plugged in ok.

Is there anyone here who can tell me how to check the oil level in the engine injector pump? it is my understanding that the pump has its own oil and is not oiled by the engine. I have found the fill port by removing the vent at the rear of the pump on the govenor housing and I have found the...

Guys, I bought this little tractor 3rd hand and it does what i need for the most part but the tach has never worked, I had to replaced the tach with a new one anyway because the original came apart , anyway it still does not work, so thanks to this site i understand the RPM sensor could be the...

Hey folks, this Farm Pro 2420 tractor was purchased second hand. Did not come with a manual or what so ever, I am trying to figure out the engine model so I can make some parts purchase. Can someone help me to identify? The tag is worn out so can't read half of it, there's no stamp anywhere else.

Hey all, I'm new here and new to Chinese tractor. I have a little Farm Pro 2420, recently the starter keep on spinning even when the key is at off position and the tractor is turned off. Has anyone encountered this or can shed some light? It will keep spinning and the starter motor get very...

Greetings, I am changing the fluids in a Farm Pro 2420. I feel foolish for asking a simple question, but where does the oil go into? I have provided two pictures. The one with 2 arrow is the top of the engine and the one with only 1 arrow is on the left side of the tractor by the fuel injector...

Greetings, I posted about a farm pro 2420 that was on my property when I bought it and wasn't sure what to do. Hadn't been started in a long time and I don't know about diesels. Long story short, with the help of my father and brother in law we were able to successfully jumped the tractor and...

I got a Farmpro 2420 from my brothers estate, or that's what is says on the hood, when I look this model up is says 1.2L 2 cyl but this one has a (YT380L) 3 cylinder diesel. Someone said they were actually a Jinma 200 but when I looked it up the tractor specs said the same thing (2cyl). I cant...

Greetings, I recently purchased a property (6 acres) and in the barn was a Farm Pro 2420 (TY290) tractor, diesel with 189 hours. The property seller said that it hasn't ran in almost 4 years since her husband past away. In addition, according to her, when it ran last there was an oil leak but...

Neighbor passed away and his 1 owner Farm pro in good condition is coming up for sale soon, don't know alot about it other than he bought it new and used it with a 5 foot finish mower to mow his 2-3 acre yard. I need a value quick, also anything I need to look at, if I get the chance.

I just bought a 2420 and when you first start it it runs at around 500 rpms and won't rev beyond that for 3 to 4 minutes. Then it will take fuel and throttle up like it is should. As long as it is warm it will run well till it cools completely and then it will do the same 3 to 4 minute thing...

I have a faulty key switch and the one I purchased from the dealer does not look on the back like the one that is on the tractor. Does anyone know what these numbers on the back of the new switch connect to Ie is one the starter wire? there are the numbers 1,2,3 and 4. Any help would be...

I have a 2420 with the TY290 engine. It has always started right up even in the cold. Recently it had a tank of fuel mixed 50/50 with diesel and kerosene thanks to a friend. It was run about 2 hours on this pulling a tiller. A few days later I tried to start it and it wouldn't. I could only get...

Got a farm pro 2420w/problems. When you put it in gear and give it throttle it takes a while to get rpms up. It acts like a old hit and miss engine.fuel filter and system is clean.Changed filter and cleaned lines and tank.starts fine just does not respond very fast to throttle pressure. any help...

Hello folks I'm new to the site and have recently acquired a 2004 farm pro 2420 and have some problems. First,is it starts up and runs fine with no smoke at all of any kind and after about 30-45 mins it shuts off like I pulled the shutoff knob. Second is in that 30-45 mins it gets over the 80...

Hello everyone, Recently bought a Farm Pro 2420 (~300hrs) and have been dragging logs around as we clear some of our property. Yesterday, I pulled a small (6"x10') log 100' in 3rd low. When I stopped to unhitch, I couldn't get it out of gear and it won't roll. I had left the differential...

Admins please move if in wrong section. I own a Homier Farm Pro 2420. I cut about 2 acres of grass with the little tractor and so far it's been trouble free. I want to change all the fluids since owning it for 2nd year. I've changed the engine oil and fuel injection pump oil. I was hoping...

I just bought an oil pressure gauge and sending unit and a temp gauge and sending unit. Installed both, one at a time so that I would replace the wiring the same as it was. I even took pictures with my phone to make sure. Neither one works. The other gauges work fine. I have power to the...

Where do I begin to repair the hydraulic lift. It leaks down. Sadly I can't keep my equipment up.

I am having problems with my rear lift it want stay up at all ! I have search on line par a repair manual but no luck:thumbsup:

I bought a used farmpro 20 horse 2 cylinder. What engine oil should I use to change the oil and filters for a fresh start in maintaining my "putt putt" as my wife calls it?

I have a Farm Pro 2420 Diesel Tractor and I am wondering if there is more than one place to add hydraulic fluid? Also, does anyone know how many quarts of oil it uses? Thank you.

I am in need of a small tractor and found a 2002 Farm Pro 2420 with 65 hours, it comes with rops w/canopy 5' King Cutter finish mower, 6' blade, Turf tires all the way around, set of tire chains, extra set of rear wheals with AG tires and wheal weights. The price is $3800.00. I have read alot of...

Hello I bought a Farm Pro 2420 tractor and would like to get turf tires. I looked on the internet and they will hurt your feelings and not worth the money into a tractor I want to use with a finish mower. Are there any other rims out there that will fit the front of this tractor? Thanks Larry

I have a jinma 03 farmpro 2420 ty290 2wd and my 3 point hitch will not raise up .I tried turning the knob under the seat ,and had no results. Does anyone have any idea where to try next ? thanks

My 3 point hitch does not go up. does anyone have this problem or know why?

I have a chance to purchase a 2420 from a buddy who took it, and a Woods RM 600 finish mower on a trade for service. The 2420 has 275 hours on it, looks pristine in it's appearance and has turf tires on it. I have a 82 Ford 1700 right now that I use with a 5' bushhog, 5' finish mower, and a...

Hi i have a farm pro 2420 there is a plate with holes in it in front of the radiator in it for summer - winter like the louvers on the old tractors it slides in and out thanks

It was running fine and parked about 2 months ago. Went to crank it up this past week end and nothing/wouldn't start. No clicking noise, just nothing. I knew the battery was old and needed replacing, so I replaced the battery, still nothing. My brother is a mechanic for the city and i'll get...

hi there new to this I have a farm pro 2420 ty290 I come across this web looking up info on my tractor I like my farm pro 2420 got it from a friend I changed oil I put 15w40 in a new oil filter and then found a leak on hi pres fuel line fixed that and put new filter on this is my very first...

mine is gone and now it the time it has to be replaced. My question is it better to buy the whole clutch assembly or should I buy the components and rebuild the clutch pack? I can do some mechanic work. thanks in advance for the advice.

I sure could use some help, I have an older model Farm Pro 2420. Runs great, starts good, but here is the problem. No gauges work, replaced all fuses, checked all wires. Everything looks good. Now here is the unusual part. While running if you turn the key to the start position all the gauges...

I just aquired a 2003 Farm Pro 2420 and was wondering if anyone could tell me a good source for buying parts?

The PTO on my Farmpro 2420 quit working. Fluid level is low, I think, but the poor excuse for a manual that I have doesn't even show if I'm checking the right thing. Does anyone have any suggestions or info, or even better, a reasonable manual? Thanks, Kirk81[

The power lift on my tractor will slowly leak down after a few minutes.The fluid is good.I suppose there is a bad seal somewhere,the problem is I am not sure where to look and what part i am looking for on this tractor.Bale me out somebody:thumbdown: Mike

i know that this sound silly, but can someone let me know where is the oil dipstick is on a farmpro 2420?::laughing:

I really need some help, and so far everything i have found on the site is right on. My tractor starts off in high range and 1st gear just fine but after it gets warmmed up it will no pull over anything nor up a slight grade. it pulls fine in low or double los if you will but nothing in high...

My belt broke today and it was shreaded does any know what lenght it is so i can go to a local auto parts and get one? thanks

Found a FarmPro 2420 for cheap - same as a Jinma 200, I think - 2wd. It has a few hundred hours on it - I was thinking of getting it to run a finish mower and possibly a 3pt snowblower. Any good or garbage? I don't mind tinkering a bit, but I don't want to mess with a complete sh*tbox. Are...

Hi my name is chuck and i just got me a used farm pro 2420. I don't know much abouth tractors since this is my first one. My question would be on how to hook up the hydraulic lines from a koyker 160 on to the tractor. I got the loader mounted but now are stuck I dont know where to connect the...

HI i was cutting grass with my Farm Pro 2420 and finish mower when all of a sudden it reved up and wouldnt move, will not move in any gear and there is a slight grinding noise when clutch is released clutch was replace a couple of years ago any imput would be appreciated thanks

Hello, I am looking for a 2420 steering gear box for my Farm Pro which is completely shot. Am interested in a used if it works and a new, just contact and let me know the price and where of course is important. I am located in TN, western side. call 731-377-9625 and mention farm pro...

Hi got one from a friend and we are having hydlaulic issues. The seal went out in the pump. He purchased a new one and put everything new in the tractor, bearing and pump. now the 3 pt will not pick up and the koyker loader is real slow rolling the bucket up. the rest of the loader is...

What is this red lever for ? I have a FarmPro 2420

Hey guys, I have a chance to buy a 2004 farmpro 2420 diesel with 86 hrs and a 60" finish mower for $2000.00 I have about 3 acres to maintain and I already have a 4' boxscrape for light grading around the house that I want to pull with this tractor. I do not know much about tractors but I would...

I have a Farmpro 2420, about 8 years old. I am replacing some of the electrical items, switches, lights, etc....Does anyone have an Electrical Diagram of the older style Farmpro with individual guages. Also, one specific question, I was replacing the work light and there is a red wire coming...

Hi I have a farm pro 2420 the has always run great. I put some new Fuel in it the other day and now it stalls out. It just chokes and stops. it all happens very fast. when you wait for a few mins it will restart. I put #2 diesel in it becouse it was all that i can get around here. does anyone...

Hi I own a 1999 Farm pro 2420 2wd front end loader tractor. I recently have had a starting problem with it. Whenever i turn the key to start it I get a loud grinding/clicking noise. I had the altenator and starter checked for any problems and both checked out, I also charged the battery. When i...

Hi i own a 1999 Farm Pro 2420 2wd front end loader tractor. I recently have had a problem with starting it. When I turn the key to start it i get a grinding/clicking noise. I charged the battery and had the starter and altenator checked and all looked good. I beleive it has something to do with...

Need some help from the experts on this forum! I had a small hydraulic leak on my FarmPro 2420 and planned on fixing it as soon as I finished mowing the grass today. I pull a PTO-driven set of gang mowers and I noticed the 3 PT arms were hanging a little low. So I pulled the lever to raise...

I have a 2006 Farm Pro 2420 that I bought on ebay. I don't have a local dealer that I know of here in southwest Michigan. I have 2 problems and 1 irritation. 1. It won't start now. It started fine about 3 months ago but not now. It cranks over fine, and the glow plugs are working. Glow red...

i have friend that recently purchased a farmpro 2420. We are trying to replace the hydralic fliud and have no idea where to pour the new fluid in. We donlt have any manuals for the tractor and we want to make sure we are pouring in the correct spot. Can someone help that may have one?

Time to finally fix my little 2420. It's been languishing around for longer than I'd care to admit. Fairly certain it's the head gasket. Got water in oil. Found out I had leak somewhere behind the thermostat that pushed most of the water out. Also found out that the trusty temp guage wasn't...

Hi new to the forum and thanks in advance for your feed back. I'am looking at buying a used ( 7 hrs) Farm Pro 2420. what should I expect to do to this tractor,since I do not know for sure what has been done to it, before starting to use this tractor. What I mean by this is the proper prep that...

I have a front end loader on my tractor and the brush hog works just fine when going up then lowering. My front end will not lower or actually do anything. I have added hydraulic fluid today and it lasted maybe 5 minutes then just quit doing anything in. I'm not sure if it got air in the lines...

Ok here goes from a newbie to this site . I have a farm pro 2420 2 wheel drive . What I would like to do is setup a additional hydraulic line for lifting a disc. I have a 10 ft disc that I used to pull behind my WD-45 . Now that it is in need of major repair . I need to locate a spot on the...

Can anyone tell me which wires go where on the old type 3 wire voltage regulator? It has the ty290 engine.Thanks for any help

I have a farm pro 2420 4 wd that I bought . From day one I have had problems with the starter breaks and hydolic leaks. My dealer can't seem to repair it or get parts. I have called the distributor without success. I live in Michigan. Does anybody know where I can get parts and service for...

I HAVE A FARM PRO 2420 AND IT WILL START UP AND RUN AT AN IDLE BUT WHEN U HOLD THE THROTTLE WIDE OPEN IT ACTS LIKE IT RUNS OUT OF GAS THEN IF YOU PUMP THE BLEEDER PUMP A COUPLE OF TIMES IT WILL START RIGHT BACK UP. IT ONLY HAS 50 HOURS ON IT IF ANYONE COULD KNOW WHAT MIGHT BE WRONG I WOULD...

Hey Guys, This Monday coming there is a local auction that I plan on attending and they have a Farm Pro 2420 on there, don't know the year, all I know is the picture I saw of it, looks like a fairly new model, also says it is 4wd with 62 hours. I was thinking of bidding on it to go with my 354...

I've got a 2005 Jinma 204 and I've got a hydraulic pump leak somewhere. My guess is it's where the "back" cover plate is. I've had leaks here before and "fixed" them by tightening up those 4 bolts. Well now I'm at the limit...and it's leaking pretty bad...almost a drop every few seconds...

We've got a 2420 with about 220 hrs on it. I did the 200 hr maint last fall and noticed over the winter and a couple times this spring that the machine would just stall out totally once in a while. It was really weird how it happens. You'll just be going along on a flat part with almost no...

I'm gonna have to replace the head gasket on my Farm Pro 2420 with the Jinma TY290 motor. I can't find any bolt torques for when I put the motor back together. Can any body help me out? Thanks ahead of time.

Just a follow up on this since the other thread is closed, I replaced the alternator on the tractor finally. I ended up using a Delco 7127M-3 with a internal regulator that was not one wire compatable. I did this mainly due to the cheap cost of the unit ($31 from Advance Auto parts...

I have been looking for a front tire 4.00-16 for my tractor and I can only find the sizes on either side of what I need. Either bigger or smaller. Havent called the dealer yet but I guess that will be next. Thanks.

Hi all I recently bought my first tractor a 2420 2wd farmpro. I have had a few minor issues with it but the dealer has done a great job getting the repairs done quick and getting me back on the road. I am wanting to know what kind of fluid I need to use and how much to change my hydrolic and...

Hi, First post here. We have a 126hr FarmPro (Jinma) 2420 with a charging problem and a hydraulic problem. Maybe someone can help us out. 1. Alternator not charging. Battery eventually goes dead of course. Keeping the battery charger on it when not in use keeps it working fine otherwise...

I have their standard tractor which is about three years old. First of all I put a new battery on the tractor about two months ago and whatever the guy gave me at Oreilly Auto Parts must not be strong enough because I have to use the decompression lever to get the thing to turn over. Once it...

Just curious...I can't seem to find anything that matches my tractor. Whenever I look for my model I always get the 2 cylinder specs. I have a 3 cylinder. Is my 2420 really the 2010? Before they renamed it? The Farm Pro site doesn't list the 2420. Thanks...

FarmPro 2420 Newbie - Can\'t get above 500 RPM\'s I am a tractor newbie. Bought a barely used Farmpro 2420. One of the fuel hoses burst during Hurricane Wilma. I replaced the engine ran fine for about 15 minutes after mowing to the furthest point on my property i made a turn and the engine...

I finally got around to using my new tractor today. I went around and made sure everything was tight, all the places that needed fluids had it (it's nice that they painted all the fluid fill/check places red), and cranked her up. Started without a hitch, idles a little rough but then again...

Can anyone tell me what the maximum tilt ange for the FP2420 2 wheel drive with front and wheel weights is? Thanks in advance for your help. Dave

Is this 2 wheel drive tractor strong enough to be equipped with a 6 foot rear finish mower?

According to the manual, the adjustment for increasing or decreasing the rate the lift goes down is to loosen the screw under the big knob under the seat and turn the big knob to adjust the rate and tighten the screw. My problem is that after loosening the screw, the big knob won't turn. It...

OK I bought a Farm Pro 2420 at a Homier Road Show, never owned or used a tractor period. When you stop laughing, if you have the time, please answer a couple hundred questions. I plan to start a thread on this tractor for others thinking of buying to read and decide. (1) There is a small oil...

I am thinking of buying a FP 20 HP tractor, I have looked at them at the Homier Shows and at dealers. One question I have (among many) is does the gear shifting ever loosen up. The tractors I have driven took both hands too shift the gears. This was the same on Farm Pro and Jinma. All the...

CAN\'T DECIDE: FARM PRO 2420 and IMPLEMENTS Hey ya'll, I am in southern Louisiana and want to buy a tractor and a couple implements. I was just wondering if the Farm Pro 2420 is right for me? I will only be using the tractor to mainly bush hog. I will only be cutting about 4 or 5 acres...

I've never owned a tractor before...I've used a John Deere 160 for the last several years to mow 3 acres. I've acquired some additional land and in the immediate future I'll want to finish mow about 5 - 6 Acres and brush hog and additional 10 or so. After the sticker shock of the New...

I purchased a Farm Pro 2420 Tractor w/front loader, The manual is mostly Chinese. I had steering problem,so i called the dealer. he sent out his mechanic. he couldn't figure it out. latter it started working again. While he was there i ask what lubricants i should use. he said sae 30 oil for...

I have a co worker that's looking for a tractor . He doesn't want to spend a great deal of money on one . He's looking for a reliable machine to do brush hog work and clean out the stalls in his Horse barn . He also wants to level out a few areas on his place . I've printed the Farm Pro page...