fel

I have a Mahindra 2665 that I bought with about 250 hrs on it. I notice that when cold, just after starting, the bucket curl is firm, as in I can drop the bucket down and then lower the loader and lift the ft end of the tractor off the ground. A while later, when warm, I can tilt the bucket...

I have an old L2250DT with a FEL on it currently. I am looking to pick up a snow blade or blower. On MP in my area is a B/L2563 which looks like will fit per a google search (please correct me if I am wrong). It is currently mounted on an L2900. I have a few questions I'm hoping the members here...

Does anyone have experience with a FEL mounted backhoe (that utilizes 3rd function)? something like this Titan attachment I'm intrigued by the additional functionality I may get with this over a stump bucket (lifting/grabbing, deeper dig) for what seems like a reasonable price increase over a...

I discovered some of the slop in my FEL today, seems the pins have a bow to them. The PO of this thing must have been a real genius. Anyhoo, can I just trot down to Tractor Supply and match up a new set? Or, are these specially hardened/sized factory parts? They don't look special at all, not...

I am looking for forks to put on my FEL. I would like to remove the bucket and attach the forks to the loader. All I seem to be able to find in forks for skid steers or clamp ons. I have a Ford 4610 Utility Tractor. I am located in souteast Missouri. Thanks for your help

Last night I parked the tractor, left the FEL about 1-1.5' off the ground, and locked the joystick in place. Since we had been working on the perimeter fence, I left one 8.5' x 3.5" steel pipe loaded on the pallet forks. Probably 85-95lbs of weight, plus the 230-245lbs worth of pallet fork...

Yesterday Julie and I began turning next years compost pile… me in the tractor seat - she was armed with a hose… the pile was incredibly dry throughout… At first pushing into the pile and lifting the dry contents was easily a full-bucket endeavor… as the pile began to get more saturated, the...

For a lawn mower. Interesting!. It could come in handy.

I've had this CK2620 for only 15 hours, I noticed yesterday that the bucket is not level, its higher ~ 1" on one side. I'm not doing any super severe work with it, don't recall any operation that would have pushed it this way... nonetheless, this is what it is now. Could the arm hydraulics be...

Does the 2021 Yanmar SA425 front end loader have a float function? I understand all I have to do is push the implement control arm forward all the way and it will click into float mode and the FEL will drop to the ground and float on the surface. It does not work on my 2021 SA425 as it says it...

I own a MAX28XL, 2014, 500 hours. I have done a lot of earth moving, digging, Field work with it and the MAX has performed well. In the last six month the FEL Control Valve started leaking, I finally decide to clean it up and found one of the Banjo Fittings is leaking. I removed the fitting and...

So I was working on my bridge yesterday and took my 4 in 1 bucket of and put the forks on. Lift and lowered fine. Loaded up a pallet and lifted and went to the bridge and shut my NH TC45D off. Worked a while and started the tractor back up. Went to lift the load and it might have lifted a couple...

I've had the 4120 since 2013 and it's been very reliable 850~ hrs now. I've got the self leveling loader and have finally gotten around to ordering an Auger with the deere bracket. I've planned on running it off the 3rd scv lever by the seat. A deere mechanic recommended I use a bungee cord on...

My (year 2012) 4035 is fitted with the ML120 loader. The FEL dump/tilt function is sticking, causing the loader to continue its motion until I jiggle the joystick. My guess is that the cable is sticking and may need to be lubricated or replaced. Or perhaps the control valve block has accumulated...

I just bought a used Ford 770 loader with arms and hydraulics for my 1980 Ford 1700 and am looking for any advice for installing it. I've never done anything like this. The loader I bought came off a Ford 1300, which I gather has a slightly smaller clutch housing, meaning that I will have to...

I own a Kubota 7060 that runs 11-12 gpm. I'd like to have the option to run some skid-steer attachments that require a flow closer to 22-25 gpm. Can anyone point me at a recommended product (like a PTO hydraulic pump, or even something that could be mounted permanently, if it exists) for this...

While I'd dearly love to have a skid steer, I simply have no way to justify it. I have a hard enough time getting wife approval on new attachments, you'd think I was asking for a government grant under DOGE. And then there's the cost of the mulcher. I have a what's rated as a 60HP tractor...

Have a tc40d that up until this year had no problems picking up a round bale. Now it won't but my 3pt will, but not high enough to off load from trailer. What might be the issue with the front end ?

ORDER OUR NEW SSQA Quick Hitch Or JDQA Quick Hitch right now with any Ultimate Rack Package and save an additional $300 and get Free Shipping! Do you have a Backhoe or a Skid Steer, or maybe you're running a post hole digger or other 3 point attachment on the back and still need a way to carry...

POSTING FOR A FRIEND. This is all I know about it. Alabama, Kubota 3130 4x4 with FEL, shuttle shift. 2300 hrs. hes the 2nd owner. No issues, works good. hes asking $13,750. If interested or have questions Pm me your # and i will pass it on to him to call you directly.

I have a cub cadet 6284 that the hydrostatic will not move on and the machine is stuck. Is their a way to release the hydrostatic transmission to tow the tractor to be able to repair

Anybody have or just used one of those limb saws that mount on a front loader on a tractor and use the hydraulics from the tractor. I need something for trimming the tree limbs along a driveway about 1,300 feet long.

Hey guys. I am looking for suggestions for an attachment I can bolt to my FEL that will drive t-posts. We've got enough posts to give us a heart attack apiece, so I'm hoping to mechanize the process. I'm not keen on buying a standalone driver, since small engines seem to hate me. Any ideas? Thanks.

I just purchased a Ford 4000 with a 772 FEL. The bucket is rough. I'd like to put a spear on the FEL. Are the pin locations "standard" or do I need a Ford specific adapter? Would you recommend a quick attach plate or just a pin on spear (Is "pin on" even the right term)? I'd rather not put a...

I have an M7040SUHD with an LA1153 loader. For all practical purposes, this loader does a fine job. Occasionally I need to lift something that is closer to the max limits of the loader, and the lift cylinders just won't pick it up. Most of the time, I figure it is the distance from the pin...

Has anyone had any experience with the Danuser EP615 FEL post hole auger? I'm ready to purchase a FEL post auger and this model is at the top of my list. I've also looked up Premier MD06PD and and Digga DDD and 1DSS in the similar gpm spec range. Are there any build and maintenance quality...

How do I remove the FEL joystick as the long arm is broken by the hyd valve

Yea I was here a week ago and couldn't get any real answers in how to plow my property in float and not have the tractor jackknife up. Couldn't be simpler and works splendidly

Hey guys, we snapped the frame on our little T293. Not a big deal as I'm a welder by trade. But when it happened a piece of the FEL distribution block broke. It's the aluminum cone that the cable threads into. I cannot find it separate and a new block is $700. I'm hoping someone has replaced one...

Hey folks, question...I'm an old "first timer" with a tractor. Bought used tc40d in '13, and it's been a good one. However as with anything getting older, it has issues. 2 new hyd filters, new fluid, but won't pick up a round bale any more. I've read some threads about suction screens. Where are...

I had previously posted this in another forum and it was suggested that I post this in Hydraulics. I have a JD 2305 with a 200CX front end loader. Recently, when I attempt to curl the bucket down to dump a load, the FEL curls upwards. I can get it to curl down if I do not push the joystick...

I have a JD 2305 with a 200CX front end loader. Recently, when I attempt to curl the bucket down to dump a load, the FEL curls upwards. I can get it to curl down if I do not push the joystick fully to the right. But it goes much slower and if I push it too far it curls upward and I have to start...

Does anyone have an online source for the bucket tilt cylinders rebuild kit? Or have what to order to rebuild(reseal) the two cylinders. It is for a ls1011 front end loader on a mt125.

I have a 2005 B7610HSD w/ LA352 FEL (500 hrs) that has gotten weak on the lift arms in both directions. First, over the last couple months, the float function got hoaky….will pop out of the detent very easily (not sure this is related). Recently, the bucket won’t lift more that 200lbs above...

If anyone has replaced a BX22 (or BX2200) FEL bucket curl cylinder, I'm interested in knowing if you were able to acquire one that matched OEM 1.25" pin size (and from where) or if you opted to go with a readily available 1" pin cylinder and implement bushings? All these years with moving nearly...

Not sure if this subject has any interest, but... I'm "practicing" removing and installing the FEL on a newly acquired (but not new) B2601 This loader has pins and the hydraulic connections are not modular. Following the directions in the product manual, along with tips shown in a generic...

I just replaced the 4 hoses on my 1987 Jd 950 with a 75 series loader. The old hoses were breaking apart so I figured better safe than sorry. I got all my new hoses on and now the loader has a mind of its own, sometimes it gos up sometimes it go’s up halfway and emits a loud wine. Sometimes the...

I'm getting 2x2x6 interlocking concrete blocks delivered for a short (4') retaining wall project, and was told they are 3\4 yard and approx weight of 2700lbs. Has anyone who's gotten these lifted them and stacked 1 on top the other with a Kubota M59 FEL? My plan would be to use a blank 1\2" QA...

High everyone, need some Devine guidance and intervention. Has anyone installed a Johnson FEL Mod. 27 on a G174? I have it mounted to a Bolens 1476 currently however, I purchased an Bolens (iseki) TX 1500 F. I have approx 5ac of weeds following the removal of 16truck loads timber. I had no idea...

Hello, I was operating my tractor when the joystick all of a sudden became floppy. I took the it apart and inside the boot all the pieces came loose. Does anyone know where I can find a diagram in order to reassemble? Thank you.

Loading up the 66" bucket with sandy loam, I tried to get a little running start a couple times, in low, to get a real full bucket, and stalled. Sandy loam is real nice to work with, sometimes hard to get a good bite, keep it low when moving it does get heavy. I say 66" bucket because I added...

Hello, I'm not sure where this post should go so here it is: In preparation for starting our Pole Building/Apartment project. I'm getting ready to pull to bucket off my Kioti KC20 HST and begin the process of installing loader plate latch on my loader are and adapter plate on my bucket. The...

With the topic of a STUMP BUCKET, is the FEL on the 5155 strong enough to use a stumb bucket, as long as you keep the size of the stump reasonable? I rented a Skid Steer (CTL) with a stump bucket and a grapple, and it was amazing. Thinking about a stump bucket for my 5155, but don't know if...

I was watching a Digginok video, Long time backhoe operator of Ford and now a B95 New Holland and he used a different approach with the FEL that is frowned upon when using non industrial tractor FEL's when trying to level uneven ground. He points out the well known principle that you...

FL1805 has anyone had issues with the loader pin rattling out? In case there is a question about what pin I mean it is item 5 on the image. I've had this happen a few times, luckily I've always been able to find it.

Greetings all: I have a CT 235, just shy of 300hrs. Just finished replacing a Hub seal in the rear axle. This involved draining all Hyd fluids, then refilling after the Hub was reinstalled. I am now dealing with the Loader arm not lowering. Up, and tilt work fine. Everything worked before I did...

I saw some videos on stump bucket attachments, particularly the ones with the grapple. Started to interest me. But then I looked into it and saw a couple threads on here that said you’re likely to damage your front end loader. But most of those seemed to be talking about somewhat smaller...

Evening, Thinking about adding a FEL to my old BX2200D - I don't know the year, but its been around the block a bit. Only really gets used for towing a trailer of logs or cutting grass with a 60" deck. I want to be able to do more with it....ideally hedge cutting or adding a FEL. It seems the...

Can the experienced please educate me on the pros and cons (or even possibility) of mounting a rotary brush cutter on my FEL with aux. hydraulics vs the traditional 3pt pull-behind options? Running a Kubota MX6000 with open station, I do realize most skidsteer guys that operate a front brush...

2655 Mahindra for sale- 55HP with loader. 300 hrs total.Shuttle shift gear model. Cab with heat, A/C, Kenwood AM/FM/Bluetooth radio. WR Long 3rd function valve. Skid steer quick disconnect bucket. 45 HP at the PTO, which is independent and button-operated from the dash. Rear tire chains...

Looking for help in selecting a trailer type to purchase with the following inputs - Current Tractor Kioti CK27HST with FEL (tires not loaded estimated tractor and FEL weight 3800 pounds) and 65 inch 3 point mount Flail Mower (900 pounds) = total weight 4700 pounds for tractor/FEL/Flail mower...

I took the FEL off our 4110 to make it easier to trailer to the shop that did our clutch job for us. I received the tractor back, and have hooked the FEL back up, and after much fiddling with which hoses go to which fitting on the joystick (no, none of the color coded zip ties were there and I...

Hi from a German Yanmar Owner, I've been reading here and at the Hoye forum for a couple of years now. I own a YM1510d since 2020 and I'm very happy with this little powerful tractor. I bought the tractor from a dealer who mounted already a FEL. Back in 2021 I updated the maual steering to a...

Was thinking of getting a backhoe for my Kioti NX5010 but the dealer told me I might consider a stump bucket and save some money. Has anyone damaged their tractor using a stump bucket?

So, today my bucket is giving me issues. When I move the joystick to tilt the bucket down I have the following issues. If I move the joystick all the way over the bucket will curl up and not tilt down. If I move it slowly the hydraulic pressure decreases and gravity moves the bucket down...

I was moving some logs with the grapple and i went to raise the FEL and nothing. All other functions work as normal but when i pull the control back to raise it doesn't raise and feel very limp. I took the cover off of the controls and it looks like 2 cables going down under the tractor to...

I have a Woods 1009 loader on my 1996 Kubota L2650. Since new (27 years) I have never removed the loader but now have to for additional clearance to work on several front end leaks. One of the three hoses is not a quick disconnect on either end. I'm thinking it was intentional since there is...

I have a CS2220 with FEL, purchased new this year, which is exhibiting odd FEL hydraulic behavior. When I raise the loader (even without a load) it will slowly succumb to gravity - both bucket tilt and main arm - with the bucket tilt dropping faster than the main arm. There are no hydraulic...

I have a John Deere 4100(gear) with a 410 loader. I want to replace the seals on the hydraulic cylinders. My problem is that the serial number of the FEL is WO0410X014991 but the parts listing from Deere doesn’t seem to match up. I would like to replace all the seals on the loader since it is...

Tym 330 HST - stock FEL controls / joystick. When I open the bucket and release it sticks open, does not spring back as it used to. Bucket keeps going to open - rolling back in toward tractor. Took off boot on joystick, everthing looks intact for the actual joystick, its just not...

Hi everyone, I'm looking to convert my old 580C to the global style quick attach. Can't find any adapters for it. Maybe someone makes a universal FEL adapter that I can make work. Does anyone know of an adapter that will fit? I know some will say I should just go ssqa, but I prefer the global...

Good morning/afternoon! My saga with the YFL155 continues, although, I think I'm getting a better handle on it (with your all's help). I have a 155d yanmar with a YFL155 FEL. I identified that the lift cylinders have an internal leak (valve is fine). I know there's little known about the YFL155...

I'm a first time poster and first time tractor owner. I have searched up and down on the internet and this forum and couldn't find others with my same symptoms, and none of the proposed solutions for similar issues have worked for me. My maintenance experience up until now has been servicing...

I have updated my TiltPlow design and would like to hear your thoughts on it. The TiltPlow allows the operator to change the blade angle, without the expense of plow hydraulics. Hydraulic control of the blade angle is a luxury, but if you want to save some money, the TiltPlow is ideal. The...

Hello, I recently found a note on my front gate asking about one of my tractors. I had no intent to sell, but I don't use it much. I talked to the young man over the phone that night and explained the tractor to him. I said I haven't started it for a year. Before that, I hadn't used it for...

Anyone know the aftermarket loader options for a Kubota l4330

Thanks for your collective patience; "what forks to choose" has certainly been beat into the ground in various ways, but after searching and reading I still don't quite understand :) In particular the affect of implement weight on 'practical' lift (as a lot of the weight difference is in the...