gasket

Would you buy an 800-hour tractor that had a head gasket blow and was then repaired by a dealer?

I want to check the rocker arm clearances on my Ford NH 1920 with Shibaura 844 engine. Before I take the cover off I should have a replacement gasket on hand, but I am having a hard time figuring out which one to order. I am seeing different places showing very different-looking gaskets; some...

So after removing, fixing and reinstalling my broken rad I filled it up with coolant flush/ water and fired it up. No leaks from the repair, but there was lots if white smoke and the rad was bubbling like a boiling kettle! Shut the tractor down and called it a night. Went back the next day after...

Took apart injector as I saw a slight leak. Need gasket that goes between the halves of injector. Looks to be plastic. Not shown in parts breakdown. Included photos of injector with gasket on and off injector.

Had a slight leak on an injector. Removed line and split injector(top half of injector); the gasket is split, looks like a plastic gasket. Where do I get a new gasket? Not shown on injector breakdown .

Does anyone have any recommendations of a reliable head gasket repair additive that you pour into the radiator to seal a leaking head gasket in a Toyota if so what is the best one what do you recommend ?I know the best way for a fix is to do a teardown or engine replacement but that is cost...

I have a Task Master TM304-C that has a blown head gasket. I need a head gasket set and possibly a water pump. The engine tag is missing from the valve cover so finding the exact engine model has proven to be difficult. I have a lot of photos of the engine in hopes someone can help me...

Hi all, I have a blown head gasket. Just wondering if anyone has replaced one and how much of a job it is? It’s a 2005 CK25 HST with 1300 hrs.

The head gasket has failed on my Branson 4220. There are just 650 hours on the tractor, so I'm a little disappointed, but now I must deal with it. I noticed that the tractor was running hotter than normal, but it never overheated. Then I noticed that there was white smoke from the exhaust even...

I think I'm in need of a head gasket but wanted to confirm. Runs/starts great but quickly overheats and pukes coolant. I put a bottle on the overflow hose and am getting lots of air bubbles. No coolant in the oil though. I just installed a new radiator cap to make sure that wasn't the issue...

Hello all, I am reaching out through the forum seeking help. So here goes; I own a 2002 JINMA 224 no FEL though it does have the hydraulic line QC for one. I bought it new, may have had 2 hours showing on it. Over the years I had a few mechanical issues. Fuel line – minor problem, 3 yrs ago...

Look at the white circle I marked on head and block. I can't find any gasket anywhere that doesn't restrict those 4 oil/water flow holes. Is this normal that those 4 holes are block by the gasket?

Hi everyone — I searched for “k-seal” and “blue devil” and “head gasket seal” and didn’t get results so asking here: My 1910 has been running hot (the line just below max after 10-15 minutes) and needing antifreeze. Today I gave it some very light duty and it went to max temp, and started...

First of all Hi to everyone I'm new here so if I screwed up be nice I learn quick.... I have a simple question: On the tractor above should there be some kind of gasket or seal between the filler neck and the fuel tank? Mine was "glued" on(and the glue failed) which I initially thought was a...