john deere 3005

Hey all, new around here. I have done everything I know how to do so far and have now turned to the interwebs for help. I have a JD 3005 compact utility tractor that won't start and I don't want to blindly throw parts at it. I was running it just fine and turned it off to talk to someone and now...

I found this site about 3005 stalling. All info was dated back in 2012, etc. But I'm here to say it hasn't gone away. I have been having that very problem. Yesterday I mowed across my field and back. Stopped for breakfast, went back out, mowed 200' it quit, and so did I. I had it hauled to the...

I have a JD 3005 tractor with 300 loader. The loader control valve is factory installed, plumbed in with banjo fittings on all 6 lines attached to it. I need to remove the valve assembly to rebuild it, but was wondering if the crush washers that seal the banjo bolt fittings could be reused or...

Dang as soon as I try to put it in gear it cuts off. Then I must shift the thing in and out of gear then it will restart. So I got to playing around with the shift handle and just wiggling it left and right causes it to shut down. 3 point works so does the loader. There is a neutral start switch...

Hello ladies and gents. Like the title says I have managed to crack the trans case on my 3005. It cracked on the right side where the large bolt goes in that holds the bracket that the drawbar rests on. I am in need of some help figuring out where to get a replacement. From my internet sleuthing...

How does one remove the hood, for painting, on a John Deere 3005? All help appreciated.

Anyone have procedure for brake adjustment on a JD 3005?

I flipped my JD3005 & it rested upside-down for about 24 hours. I got it back on its wheels this morning but it won't start. When I turn the key I get a single clunk sound. Any thoughts on what might be going on? George

After 3 years of use, the exhaust on my 3005 has turned the back of the loader bucket black. A minor issue, but I see no reason to send it out the lower corner, Im sure it contributes to the chaff and gunk that gets blown around into the radiator screen. And its tiny. Any motor can breath...

Does anyone have any knowledge and experience with a JD 3005 tractor? I'm trying to get as much information as I can to learn as much as I can.

Does anybody know where I can get a 300 loader for a JD 3005

I have been wanting to build a full cage ROPS since I got my tractor about 2.5 years ago. My farm is 100% hillside, and I push my tractor to the limits regularly. I've added wheel spacers to add a total of 9" width in the rear, which made a huge difference in stability, but I want the protection...

My Deere 3005 3 pt hitch bounces every few minutes when I have it raised with the box blade on it. Its a Woods 5' box blade. The tractor only has 120 hours on it. Can it be that the box blade is too heavy, or is there an adjustment that needs to be done? It seems fine with lighter implements.

My dad's jd 3005 has a control valve and and handle for a fel and also has hard lines ran up to about mid-way of the tractor.However, he does not have a loader and was wanting to use those hydraulics for his wood splitter.The tractor does not have any rear hydraulics.The wood splitter does have...

Ok call me stupid but how do you open the hood on a JD 3005 with FEL? I know about the front pin in the side grill and I can pull it out. I can also pull the front grill out slightly toward the loader but nothing else. I havn't found any other hood latches and it doesn't just raise up.... Thanks

I have a new John Deere 3005 2WD that came with ribbed 5.00-15 front tires and R1 ag rear tires. I will primarily use this for mowing and would like to move to turf tires. Can anyone help me determine which wheels (rims) and tires sizes I need for the 3005? I think the front turf tires for...

Does anyone on here have a wiring diagram for a J.D. 3005? I have a 2007 790 and I believe the wiring is exactly the same. All of the wiring diagrams I get for the 790 are for the older models. I have an 07 and in 08 they changed from a 790 to a 3005. The 790 with serial numbers beginning...

Anyone know of an aftermarket replacement for the stabilizer chains on a 3005/790 tractor? I love my tractor, but the design of these chains is a bad one IMO. I'm around several other tractors with different designs that are much more trouble free (including other JD's). Mine constantly rust...

Does anybody know why my 3005 keeps dying while I'm operating. Seems like it doesn't start dying until I have been using awhile and it gets warmed up real good. I simply turn key off, put in neutral, and re-start. It turns over a few times and starts right back off. Could run another 5...

I am impressed with the ability of my compact but the box blade my dealer said i absolutely had to have seems to be a bit heavy do they have smaller one

looked at a3005 2wd the other day ,dealer quoted $9500 ,was wondering if this seems like a good price on this unit??

One thing I noticed while looking at the Deere site and I haven't seen much mention of the tractor on the site but the 3005 seems much cheaper than say a 2320 even and much much cheaper than the rest of the 3 series. I am sure there's a reason and I haven't really compared the specs side by...

Long time reader, first time poster. I'm the proud new owner of a JD 3005 4x4 Tractor with front end loader. I also bought a Frontier box scrapper (BB2060) and Rotary Cutter (RC2060). After working the using the tractor for the first time to day, I'm loving this thing more and more! A...

I am very interested in the JD3005, and would like any owners opinions and or advise about this tractor, pics are welcome too. thanks

Guys, Has anyone attempted to re-route the underneath forward discharge of exhaust to the rear of on their JD. I have a new JD 3005 and find the low forward discharge of exhaust up front comes back on the driver in a big way. Thinking of turning it towards rear and running it back under rear...

Someone asked me in a thread a while back what a "pig pole" was for. Well, thats what ive always heard a boom pole referred to as, so thats probably where the confusion came in. I had my wife shoot a quick video of it in action so folks could see what its extremely useful for. Please excuse the...

I posted a week or so ago asking about used tractors. I have decided that with the 0% financing I could afford a new one. Both of these tractors are gear drive and both have about the same HP. I will be mostly brush hoggin, mowin and moving dirt etc. while I'm building my house. Eventually...

Hello all. My name is Chris and ive lurked here for quite a while. The excellent debates and scads of information here helped me to decide on my new John Deere 3005 tractor. Well, a 790 in sheeps clothing. Ive enjoyed looking at all the various posts and topics you have here and now that i have...

Is $14,800 a reasonable price for a new JD 3005 with FEL? I've looked at several small tractors and this seems the most reasonable for my area. We don't have many dealers for any tractors. I looked at a Farmtrac 300DTC and went the other way after reading about all that company's woes. The...

Just a few pics of my 3005.

Hello Folks Was hoping to get some feedback on what I bought. I did quite a bit of research? Spent about a month considering used tractors but finally settled on the 3005, I don`t get it for 3-5 weeks. I had arranged with the dealer for the 2008 3203 hydro 4 by 4 with loader, but got a call the...

Anyone know anything about it? It shows up on the build/price but not on the website. Looking at a no frills tractor with a backhoe and this is the only one in the HP range to accept one. 3203 won't.