kubota b2301

Selling my B2301 with loader to upgrade to a larger tractor. 2016 Purchased new for use on my 4 acre property. Mostly moving mulch, soil, and digging post holes. Original owner 175hrs BXpanded Tooth bar for bucket. Always Garage kept (my shop is air conditioned so it’s been climate controlled...

Hi guys, first apologies for all the questions without useful info in return. I'm new to tractors but hopefully I can return the favour soon. So since excavators have their own controls, is an expensive rear third function unit necessary? $700 U.S = $950 can + tax. On the 2301, there are power...

Hello all. Hoping someone can guide me to options on my new to me B2301. In short, the Loader fell off working in the woods, 1 side. Hoping I can get consideration from Kubota, I'm the 2nd owner. It has 250 hours. Trashed the hood and the grill, and bent the loader to the point it will...

Does anyone happen to know if the B2301 has the 1.5" x 3" or 2” x 3” ROPS? Sorry, not at home to measure. TIA

Hello. Old member here again looking for my next Kubota. Was active around 2000, but none of my old posts seem to be around anymore. Good to see some familiar faces, Bird among them....great guy and full of top notch info.! So, I own 1/2 of my 2000 B2710 W/ FEL and 72"MMM (800 trouble...

I've a JD 2025R. Good tractor but with some electrical issues, probably mostly solved now. 420 hours. At 660 hours, my 4010 (like a 2019E if made) front driveshaft Ujoint blew apart at 9 years. Had the 2025Rs greased at 200 hours. Supposed to be greased every 50 but cannot get to it nor...

Hey all, Been given a bit of the run around from the dealer on a front mount snowblower attachment for my 2018 B2301. I was told by one dealer the BX2816, BX2822, and BX2330 models are the only ones that fit my tractor and subframes/pto shafts are identical. Then another said all subframes and...

When looking at prices online, it looks like I can afford a B2301, but when I get a quote from a dealer, it's a lot more than expected. Is this common? For example, on the Kubota website (Tractors), it says zero down, zero percent, but when I get a quote, it looks like there's almost $2700 of...

EDIT: FYI in case anyone stumbles on this mess later, the Kubota approved way to make this work is to make the Land Pride 3rd function essentially removable with quick connects on the ends of the hoses, and attach the appropriate fittings to the hoses to power the 3rd function kit from the...

I'm getting ready to use a newly purchased B2301 for the first time this year during cold temperature. My question is when I get ready to start it I don't see a light or hear a clicking sound to let me know the glow plugs are working. Can someone tell me if this model has this feature available...

Just purchased new 2301, FEL, 54”QAbucket, bolt on cutting edge, R14’s, rear QA, loaded rears and LP 54”boxblade, $17,500 plus tax. Seemed to be around $600 less then any other sealer and this dealer is 20 minutes away. Think I did ok given the lack of inventory and unwillingness of most dealers...

I just purchased a new Kubota B2301 HSD with LA435 front loader. I really like the unit but it doesn't have any hooks on the bucket and I'm no welder. Any suggestions?

Hi everyone. Tractor newbie here and have been browsing forums and researching what tractor might work best for me and my property for the last year or so. 5 acres only. with 2 acres of field , 2 acres of brush, 1 acre around the house(backyard) . alot of flat area but some hills to upper and...

I was looking closer a B2301 yesterday at dealer getting final numbers. A couple things I noticed seemed to be a concerned. One was the tranny screw on filter just off the rear axle. Looked pretty exposed to easy damage. Has this been a issue? I also noticed the fuel filter hanging outside the...

I just built a new house on 4 sloping acres. Some woods I would like to maintain and keep the scrub brush down between the bigger trees. I have a 450 long driveway that is 1/2 paved and rest gravel. Then about a acre to mow. I致e got quotes from multiple dealers in my area on a B2301, and there...

I'm looking to install a step for my B2301. There isn't one listed as a part for my tractor. Has anyone used another model's step or another brand? Thanks

We are considering purchasing a B2301. Can I get some feedback from current owners? We own 4 acres, almost flat, in Bremerton, Washington. We need to drag out dead/fallen trees, rip out blackberry bushes and morning glory vines and level everything by adding topsoil. And remove about a...

So, my long awaited grapple came in today with the third function valve. It's an EA Wicked 55 with a W. R. Long VK12 electric over hydraulic valve kit. I'm trying to work through the instructions but there is some disconnect. It states 'there is a steel tube that goes from the power beyond...

Hello All, New to the forum and need help from the experts. Found a used B2301 with only 147 hrs with FEL and forks. What should be its price be, seller asking $14k. Lastly i have 5 acres of swamp to grade and pull stumps from dead ash trees. thanks in advance

Hey ya'll Been on here on and off for about the last two months. Co worker of mine who bought about 16 acres started talking to me about him looking for a tractor for his property and BANG...Got me thinking about my 4.5 myself. I had a great little toro LX425 with a 42 inch deck for the last 11...

I am thinking of upgrading from my BX2360 to a B2601 and test drove one at my dealer and was surprised to feel how stiff the HST pedal is especially in reverse. It felt like I was trying to drive it with the brake still on (it wasnt). Do those of you who own either models find the same thing a...

Have done lots of reading and research in my quest for my first S/CUT. I had narrowed it down to the Massey GC1715 or Kubota BX2380, but I can't get over the reduced lift capacity of the BX2380 vs GC1715, especially with the QA on the 2380. Because of that I was leaning towards the GC1715 but...

The B2301 was a new model when I bought my JD 2025R. I looked at a B2301 after having a rotten experience with a JD 1025R but when with the dealership I'd been with and that was so close by. Just wondering how your B2301s are doing. In a spreadsheet comparison, it beat the 2025R. Ralph

Hey guys! Just bought a house near South Bend, IN with a good size yard. Came with a 1-year old Kubota Diesel B2301. Nice piece of machinery. Not sure if any other owners want to roll call in this thread :). Just thought I'd introduce myself! I've also got a 2007 EZGO TXT cart that I am in...

I've been looking for a tractor for a couple months, and at this point I think the Kubota B2301 is my best bet. It has the right mix of features and capabilities to do everything I need, and seems to be a good value vs competitors. The biggest challenge now is budget, and choosing the right...

Today I used the new B to dig a 150' trench and carve out a new bed. The Woods PHD helped plant 3 15gal magnolias and many bushes. The machine worked perfectly.

After a long search and tons research on TBN, etc, I finally bought my first tractor. This community was very helpful when I was reading up on size, uses, etc. I chose the Kubota B2301. I'll be using it to landscape and maintain our 4 acres and having a whole lot of fun in the process. :D

Hello everyone, I am getting my first tractor delivered tomorrow! It was a laborious process on trying to decide between the BX25D and the B2301/B2601. I am sure I would have used a backhoe on occasion, but just couldn't convince myself that I would need one on a regular basis. So I took...

The CS2410 does everything I ask it to, with the exception of the loader. The only thing I use the loader for is to move hay, and the small loader will neither lift enough or high enough to do what I want. I'm usually feeding large squares or small rounds which are less than 900lbs. the 2410...

Hi everyone, I'm new to the forum and am looking for some feedback for my scut or compact purchase. I have 2 acres to mow and have a 300' x 30' driveway to remove snow on, we get a lot of wet stuff and ice during our winters here in eastern Ontario. Using the FEL to work on some retaining...

Hey all, Does anyone out there have one of the new b2301 tractors? I am currently waiting on one(for about 3 weeks), and just curious. I saw one person that has a b2601. The dealer I ordered from has a b2320 in stock, but I liked some of the features of the new one, so I opted to wait.... The...

Realistically, I have a little more than an acre of pasture to care about, a large gravel driveway and then some nice lawn/garden. I sense the B23xx is already overkill but as my pasture is quite hilly, I want something more than a BX. Any recommendations in that series range? Also, I've had...

Good Day! I have just about had it with my Cub Cadet LTX1146 and bercomac snowblower and have decided to get a real tractor. After considering New Holland, LS, Kioti and Kubota i have finally decided on Kubota (0% for 60 months and dealer is 15 minutes away, all of the other an hour away). I...