kubota m9000

Im doing a service on my M9000 HDC 4wd. I intend to drain front differential and hubs. Manual says to refill hub oil to top of fill plug threads. That leaves no room for expansion once temperature gets up in hubs. About half way up there is a plug. That makes more since for a check full plug...

I have a new clutch disc and pressure plate for sale for a m9000 Kubota

Been contemplating them for a while now. I purchased aftermarket separators but bought the Racor R12T elements with Aquabloc and put them on the aftermarket bases. As expensive as off road diesel is today, the quality of the product can be questionable at times so I felt that additional 'fuel...

Man all my front loader Rams leak and now all the sudden the lever sprays out of it I can't even drive my tractor what do I do is there a rebuild kit for all of it I don't

Not long ago I posted a thread about getting a bigger tractor to go with my Kubota L4400. I want a pre-emissions tractor with at least 60hp. 4wd. Loader. No cab. I found a Kubota M7040 locally. Beat up all over but mechanically sound. 1500 hours. $28,500. Dealer came down to $27,500 but I just...

Other than 20hp what are the major differences? They seem to be about the same size and the tires could be the same size too. thanks, Bill

I have a question about the m9000 I just got it. It's a 2005 and has hyd. shifting my question is when it's not running and in gear and the forward and reverse lever is in forward should the tractor roll or stay put without the parking brake on thanks

I have 2 M9000's , one with a cab and an open station. The cab tractor has mirrors (obviously), the open station don't I had to back my NH BR round baler into the barn this afternoon and park it in it's parking place. Not thinking about it much, I hooked the baler up to the open station M9...

I'm looking for advice on pricing from a dealer for a 2000 Kubota M9000 with cab/air/heat, Quick attach loader Q940 and bucket (self leveling), 3 rear remotes, 2096 hours and 75% tires. Tractor is clean and well maintained. Asking price is $29,500. I'm in upstate NY.

Anyone know why I can go get a M9000 cheaper than a M7580 from same time period? Anyways, looking at M8200 or M9000 for growing room, M7580 meets the requirements (504 super I, 7 ft' Hay Disc Cutter) Will be used for haying and feeding cattle primarily with bush hogging second. What is too...

I'm considering a Kubota M9000. Current owner isn't sure of the year 2000-2003, 1400 hours, with loader (Euro-style quick attach), cast rims, and power shuttle. I haven't seen it in person yet but sounds like the rear tires are pretty well used up, fronts seem to have already been replaced...

Howdy All; I am looking for a small to medium tractor. I recently came upon a Kubota M9000 tractor for sale. The owner says he will sell the tractor, minus the engine. It has the 90hp 4 cyl diesel in it. Upon further questioning about the engine, he states that the state of California will not...

I'm looking at a 2002 M9000 and wondered what those with experience with this particular tractor thought of it. I've read that there can be issues with the clutch and cab AC. Cab, Heat & Air, with Bush Hog M546 Loader and 80" QT Bucket & Hay Spear, 3 Remotes, 18.4-30's @ 75%, 12.4-24's @...

Ok while looking at tractors I have found some with all of the options I want except a fel loader. Im looking for either a M9000 or M8200 with the following, cab 4wd, at least two rear remotes, and a fel. So my question is if I get a tractor with everything except the fel how hard is it to put...

I am looking at buying a new to me tractor for my farm. I currently have about twenty head of cattle and have plans to grow. I currently have a kubota m8580 that its used for cutting, raking, and bailing hay and everything else around the farm now. I want a tractor big enough to use in any...

Can any type of ac Freon be used.

Having starting issues with Kubota M9000. Was bushhoging on hill side and tractor shut down. Added fuel bled fuel lines. Pulled off water separator. Cleaned it does need a new filter. Pulled fuel filter pored fuel out replaced pumped it back up. Tractor just turns over but will not start. Have...

Guys, Do you think my M9000 can handle a lift-type JD HX 14 mower. The rated lifting capacity is 5000plus lbs but tractordata says it can only lift 3500. The mower weighs 3000 but alot of that weight is behind the lifting point. Will have to put a PTO 1000 converter kit on. What do yo think?

Need to order remote kit for my M9000 2005 Kubota tractor. I have one remote and am wanting to put another one on the tractor. Where is the best place to order this? Do you just call it the remote kit? Do I need anything else? What is the anticipated cost? Thanks, TC

I'm going to attach a hay collector to my tractor. To do this I have to have a possibility to couple a one-way additional cylinder to be operated by the 3PH position control lever. But a problem is that I can't find a port for such connection on a tractor. Can anyone help me to find that port on...

Hello Group, I am buying a la1251 loader for my m9000 kubota. I need a bucket because the loader I bought on Craigslist did not include a bucket. I found a bucket with the following dimensions: 8 foot wide bucket ,pin holes are 21 1/2 inches apart on inside and about 20 inches from top to...

Hello Everyone, I have a Kubota 2000 Model M9000 2WD with ROP and recently have a problem with it not moving while in High gear range. I bought the tractor last June with 335 hours on it. Previous owner didn't use it much, mostly for hay operation (loading and unloading round bales but not...

Hello Everyone, I have a Kubota 2000 Model M9000 2WD with ROP and recently have a problem with it not moving while in High gear range. I bought the tractor last June with 335 hours on it. Previous owner didn't use it much, mostly for hay operation (loading and unloading round bales but not...

I tried to search on this topic, but I didn't find anything that was exactly the same as my situation. I have a Kubota M9000 that is 8 years old with 577 hours on it. A few weeks ago, I was mowing some fields, and afterwards I parked it in the shop with the mower still attached to the 3 point...

So my father recently bought a kubota m9000 4wd tractor with front end loader. I understand it's shuttle shift with 4 forward and reverse gears. I was wondering is the shifting just like smaller kubotas? Can you start in say gear 4, instead of starting in 1st and working up to 4? I have run a...

Have an opportunity to purchase a 2004 M9000 4x4 w/ cab and FEL. Here is the story behind this tractor and needing input from some experienced hands as to whether it is a good deal or walk away. It was bought new from the dealer (one owner tractor) who has it now and been regularly serviced by...

Can anyone help on comparing a Kubota M9000 to a M 9540. Thanks

I was wondering if my kubota m9000 which has 90 hp on motor and 80 hp on Pto would handle a krone ec 3200 cv with flail conditioners. The minimUm Pto requirement is 80 hp. I would appreciate the input.

will a bt750 backhoe fit on a m9000? if not, any recommendations?? thanks

anyone have a alternate cabin air filter for a m9000..the oem is $45.00..I have a new m110x its cab filter is the same as a toyota camerey 1988 $14.00 vs $53.00 at the dealer..the denso numbers go nowhere

Anybody rigged up something for an aftermarket muffler for an M9000 yet? I've had to put an elbow right where the pipe exits the muffler but it looks like more surgery or a whole muffler is in the works. Don't even want to think what the dealer wants for one. What have you done to replace the...

We purchased a M9000 around 5 years ago and have not had to turn a bolt on it yet. Now I'm having steering issues. While moving some wood around with the front end loader I noticed that the steering was a lot tighter than it normaly is. I chalked it up to the excess weight of the wood in the...

Hi fellows, Is anybody able to consult me, what kind of subframe should tractor (in this case M9000) be equipped with to attach a front blade? The Operator's Manual says concerning the front blade: "Need subframe". But what a subframe? I don't use FEL, so I have no any subframe on a machine. Do...

We own a 2003yr. M9000 Kubota with hyd. shift and LA1251 loader. Problem with shift and loader. When tractor is 1st. started loader works fine for few minutes then becomes sluggest. After warming up for several minutes it works better. Have bled air from system by manuel rec., changed fulids and...

I'm looking for a motor for a M9000. Anyone have one or any leads to one would be great. Thanks, Todd

How much time for accomplished mechanic to replace clutch and pressure plate on this Kubota. Cab tractor, 4x4, FEL is off but not brackets. Thanks

I wanted to see what you guys thought this is worth 2000 model Kubota M9000 2wd Rops Tractor with 1100 hours. Clean tractor it also has a bushhog brand loader.. I am wanting input on the retail value Thanks!!

I am considering getting rid of my open station 1994 JD 5300 for either cab JX95 or JD 5420 or Kubota M9000. I want a little more hp with cab but stay in the larger utility tractor category. All are MFWD. Not familar with JX line. Farmer has 2007 Jx95 for sale with 87 hours. Has 2 of them but...

What is the slowest speed in a Kubota M9000. I am still looking for the right tractor and the M9000 looks attractive but one thing it must do is travel very slowly as I want to use a chain trencher on it. The trencher manufacturer recommendations are: "You would need at least 17gpm to operate...

I'm needing a new fuel filter. Dealer has them for a ridiculous price not to mention it is a 40 mile drive. Is there any fuel filter out there that will cross with them that I might pick up local?

Hello, when trying to check my right axle oil it is always shoots oil at me is it vented why does it force oil out the top plug?

I don't believe there are too many posters here that have big tractors like I do, but here's hoping someone has some expierence or can shed a little light on my leak. My M9 (which is still under warranty, but I need it right now) has a leak. Transmission fluid is leaking from somewhere under...

I do approx. 70 residential driveways with my M9000. The clutch is driving me crazy. I want to trade it in for L5030hst but afraid L5030hst wouldn't have power to do 70 residential driveways. I have an inverse snowblower. Will the L5030hst be able to handle 6 inches of heavy wet snow? thanks...

purchased today from a one owner private individual, a Kubota 2004 M9000 cab and air 4 wd with LA1251 loader w bucket(like new) has 482 hours still under warranty until Oct 26(2 yr) then 3rd year power train warranty. has only 1 set rear hydraulics, no scratches/dents, been used to pull 15'...

owning-ML-903081-ML- Kubota specific thread.

just traded 10ft cutter for 15ft bat wing. how hard is it to install second set of remote valves and how much will it save?dealer wants 750.00 to do job. is that a fair price? have been switching hoses to fold cutter to get through gaps then switching back to wheel cylinder to mow. any problems...

I know how everybody likes pictures so I thought I'd share my bucket hook mods with all the toys Steve

Will my M9000 pull a 12\' offset? My M9000 has 4WD and 90hp will it pull a 12' offset disc?

Need to plow under some love grass to plant native grass. What size disc and what type disc offset or tandem should I look for?

Hello, wondering what a 2002 M9000 with 1200hrs in good condition is worth? No cab.

Will a 2002 Kubota M9000 have a Turbo?

Getting a M9000 what size of mower will it handle?

Found a used M 9000 I had to have so it weights about 5800lbs without loader. If I wanted to carry a mower and BB and maybe load tires what axles would I need?

Picking up my Kubota M9000 with a 546 Bushog or should it be Brush hog loader, 1210 Hrs, QD bucket and pallet forks, two rear remotes, and a sunshade on a folding ROPs $18750.00. Should I remove or fold the shade to trailer? Got a 20' car hauler with one axle brakes and two 7000lb axles. Is...

I fragged the rear differential on My M6800. the whole thing exploded and the case grenaded. I had Ice chains on and was pushing on uneven ground. I had skidded 15,000 feet of pine the week before and I felt like I was finally beginning to respect the tractor. I had it for 28 months. I was...

owning-ML-843834-ML- Brand specific post

Okay, time to pick everyones brains. I have seen a few Kubota FWA tractors with front fenders but I can't seem to come up with a manufacturer or a website. Anyone got any ideas. I'd make them myself but due to the wheel cut, they need to actually articulate somewhat at full lock or they will...

Although the engines in these two tractors are quite a bit different in size, the smaller TN75A engine is very close to the torque of the much larger M9000. HP on the Kubota is quite a bit higher though. I'm trying to convince a friend of mine, at least for a second, to consider the TN75A in...

Well my new m9000 has arrived. I ordered it last Oct and said to my dealer I would like it toward the end of March. Feb came and he called me that the m9000 would not arrive untill the end of June so he got one from a dealer down south. First impressions are nice machine,alot of power. Not as...

Hi! I'm looking to upgrade my JD4500 to something I can do more farming with. I've narrowed my choices to the Kubota M9000 or a JD 5525. I've spent quite a bit of time researching each machine and a little time driving each one. To me, there is no clear winner. The Kubota has marginally...

What could I get for one with a loader 1920 hours 1998 for trade in price?

Can anyone tell me what type connectors my hydraulic service ports are on my M9000? Its specs are 17 GPM @ 2880 PSI (if that matters). I searched the form, my parts, service, and operators manual and didn't see anything that helped. I would like to know what to buy for hoses connecting hyd...

Since Kubota does not list prices on the website I thought I'd get some opinions here. What do yall think a good price would be on a M9000 4x4 full hard cab with heat a/c am fm cassette fel 8'bush hog and 8' box blade? New prices in the northeast Texas area? Thanks

owning-ML-556950-ML- Brand specific. Moved to Kubota forum.

I have almost 50 hours on my tractor now and noticed the red float in the water seperator was almost even with the white line so I got out the book and studied up on removing the seperator and dumping the water out. I turned off the inline valve unscrewed the seperator and dumped out the...

Today after putting another 4.5 hours on my new M9000, I have decided the one thing that is missing is Hydro. I have the hydraulic shuttle, but for precision work, it just doesn't compare to hydro operations in my opinion. I have quite a few hours on a hydro. I read a lot of the TBN discussion...

I finally have started using the new tractor and I've got a question. I know you guys swear by the tilt meters and all but my sales guy told me that he uses the clinch method and that way he has his eyes on his work at all times which seems to make sense to me. When he starts eating the vinyl...

Well I got it today coordinating the delivery took a while and we didn't get everything hauled to the ranch. The Shredder, Loader Bucket and Box Blade wouldn't fit happily on a 24' gooseneck along with the Tractor, Grapple and Auger so on Friday AM they will bring out the rest. We got here about...

i am looking at a kubota m9000 with 200Hours on it, it has a shuttle shift system and a turbo diesel, the owner wants 27,000, is this a fair price? [Email]ejonathanarmstrong@gmail.com

Thought I'd update any who care about my adventures. I ordered a Kubota M9000 with a 1251a Loader, a rhino 72 tw shredder, a woods 84" extreme duty box blade, a Beltec Hydraulic down pressure rock auger, a H&H "V" type toothbar and a BTR grapple rake. All of this was done in mid September...

I'm purchasing a 4wd M9000 and need to find a very heavy duty quick attach grapple for picking up and moving around 350 acres worth of cedar piles and large rocks I'm located in South Texas and my dealer is concerned about buying from any of the unknowns because I'm going to have everything on...

Hello folks I'm getting ready to buy a M9000 4wd with loader and hydraulic shift is this a great, dependable tractor or do you have any other recommendations. I plan on using it on the ranch to do light road work and cedar gathering and burning. The ranch is very hilly and many of the roads are...

My best friend just bought a brand new Kubota M9000 cab/air tractor to bale hay with. He likes it except for the a/c. It simply isn't cold enough. Just won't cut it in this Texas heat. Is this common on these tractor's? After he bought it and became concerned about the "cool" a/c (instead of...

M9000 \"whines\" when in 4WD... Dunno why, you don't hear it when running in 2WD mode. I'm worried that something may be wrong with it internally. Also, could it be the fact that I have UDT in the front axle case rather than 80w-90 gear oil? UDT is a lot thinner...

I am new to all of this tractor business. I have bought 160 acres of mixed pasture and woods in pretty hilly terrain and need a tractor for bush-hogging and general work. Will need to plant some food plots. A friend of an Uncle is selling his M9000 Kubota with a loader to buy something bigger...

Now I realize that not too many, in fact nobody that I know of has a Kubota M9000 that is currently posting on this board but just in case someone someday is interested I thought I would go ahead and post what it took for the 50 hour service. I had this priced out at Mid Valley tractor co in...

Finally my first question, I just got my new M9000 for the ranch. I am using it to help clean out 35K sq feet of chicken barn that are really dusty dirty. I wear a filter but I'm concerned about clogging my outer air filter on the tractor. I think it might help to put a precleaner on the tractor...

I'm looking at a Kubota M9000 or M-110 with a cab for haying (rd baler), discing, etc. I've got 90 acres in hay now plus another 70 acres or so I may convert from the wheat now planted in it. How do these tractors hold up compared to the Deeres and New Hollands? Any specific advise is...

On another internet site, www.ssbtractor.com/ some owners of m9000dt`s and m8200dt`s are saying they are only getting 400 to 600 hours out of their clutches.Any one else had this problem? Is it true??

I had been looking at the NH TND 75 and the Deere 5310 Cab models and decided to wander into a nearby Kubota dealer. I drove the M9000 and think I have found more tractor for about the same price. Any major deficiencies in this machine compared to the other two? How about price. The dealer...