third function

A word of caution, I had a third function valve put on my BX 2680 for my grapple and was happy with everything until I got under the tractor . Instead of routing the hydraulic hoses inside what frame as all the other hoses and wiring are routed the across the underside of the frame rail and...

I want to add a grapple to my 4035. If anyone has installed a WR Long third function unit, any input would be greatly appreciated. If possible, any pics you could share would be helpful too! Thanks much!

Any one with a 242 installed a third function remote on tractor.

I have a JD1050 that the previous owner fitted with a ezee on front end loader. To do this they added on a hydraulic control valve that is similar to the below image. I would like to use a grapple on the loader and need someway of adding a third function. I could add a valve and "steal" flow...

I'm trying to sort out my existing hydraulics to add a third function, but I'm in over my head when it comes to equipment hydraulics. I've got a Woods 1020 loader on a New Holland Tn65, the loader valve has 7 hoses on it, four go out the loader arms, of course, to the loader hydraulics. The...

Just had the WR Long 3rd function kit installed on my YT235 and I’m already finding some things that appear to be done incorrectly. If someone has the 3rd function kit installed I need to ask a couple of questions or share some comparison photos.

https://store.wrlonginc.com/products/valve-solenoid-12gpm-valsold03s How does one remove that? Like anything else, a quick swap turned into a $100, one week wait. Thanks.

Below is a picture of the 3rd function valve on my RX7320. I haven't used the 3rd function in over a year. I attached my grapple yesterday. It opens, but won't close. The solenoid thing in the picture has another just like it on the bottom side of the valve. That's the one that controls the...

Most of the used Tractors that I have looked at do not have a third function installed. That is an absolute must have for me. I will have one installed prior to bringing it to the farm. So , any help determining a ball park range on the cost of materials and installation for the third function...

Hey guys. I have a 3rd function kit installed on my Massey 1526. I want to add a rear remote to control the top link. Is it possible to just run lines to the rear and have ports like that? And then connect the top link into that? I’m assuming the diverter button on the joystick would then...

Hello everyone; Just bought a used TYM T264 and am thinking of installing a third function, as Tony's Tractor Adventure Homestead Shows in his video and getting a grapple for logs/brush/etc but I'm having trouble finding what the hoses/connections/fittings sizes are. Call the nearest dealer...

I'm not finding much direct comparison between WRLong third functions and OEM kits. I am considering installing it myself (mainly to learn more about maintenance). Both kits are virtually the same price. I'm on a kioti, and the instructions are from what i read - but i care more about...

Hello everyone! I'm a seasoned Kubota (and Ford) user but have never delved into modifying hydraulics. Currently, I have a late '90's Kubota L4200 with LA680 loader. The joystick valve has 7 lines going to it so presumably it has Power Beyond ready to go. Question, which lines are...

New to the forum here. I am looking at rear remote options for my TC35D. I'd like to stick to the factory remote if possible, though I have considered other options. I can buy the full kit through my local dealer and other outlets. However, before purchasing, I would like to see the installation...