track

I've got a new KX040 with about 20 hours on it, half a dozen times now the tracks have made a load popping .. which I assume is a mis-alignment on the sprocket as it follows a tight turn. I try to exercise good practice and keep both tracks moving when turning. I think I know the cause, the...

My father-in-law left me all his tools and equipment. So i have aquired a Power Track 450 LT chineese mini dozer. Its an early 90 model with 2 cyclinder diesel in it. I cant seem to locate the oil filter. Also i need insructions or a manual on how to adjust the foot pedals for clutch and brake...

I need help figuring out what to buy! Please tell me what YOU would do! And how YOU would approach this project. We just bought a 150 acre farm (all crop land). All of it is rolling hills - nothing terribly steep, but not flat either. In the next year or so, I need to: 1. Cut and grade an...

I need to buy either a table saw or track saw. Not sure which to purchase? My needs are typical for a table saw, which is what I am familiar with. Ripping fence pickets to become a little narrower, doing cutoffs on half size fence pickets, and occasionally cutting plywood. (Although I often use...

Considering the same sales book had listed a 2016 SV95-2 with 2,000 hrs. for $56,000, $82,000 for a 2023 seems a good price?? Not buying, just posting.

The left track of my excavator (Kubota KX41-2V) does not have enough power to make a turn. I replaced the left final drive but that didn't solve the problem. So I connected an extra set of hoses directly from the control valve left travel section to the drive motor, but no difference. The...

Morning all. Thought I would post this up in case anyone ever has a need to know. I'm sure it's common knowledge for some. I did forget to mention to unhook the batteries from the 12v donor. Could possibly end bad if you don't...

I just bought a KX057-5 and it's my first excavator (for property maintenance). I've been doing a lot of research trying to educate myself on operation and common maintenance. Anyway, I've only got 5 hours on the machine and I noticed that the tracks are showing metal on the "lugs" that I...