1998 Cub Cadet 7265 - HST Hydraulic Questions

   / 1998 Cub Cadet 7265 - HST Hydraulic Questions #1  

Timpala

New member
Joined
Jul 13, 2008
Messages
6
Team,

With Summer upon us I'm putting aside time to finally diagnose this device.
I put a new engine in it last Fall which seems to run well.
The lingering issue is this: The tractor loses power when going uphill. It will bog down and stall the engine if I allow it. If I let off the accelerator the RPM will come back up and we'll continue our slow hill climb.
It doesn't seem to do this in reverse but reverse is so slow it's hard to really tell.
I haven't found a good service manual of the HST system for this old of a tractor. I found one for a 2003 but things seem quite different in there.

Open to any and all suggestion for troubleshooting.
Clean air filter.
Clean fuel filter.
Non-restricted exhaust.
Hydraulic filters were changed over a year ago but am open to flush/fill of hydraulics if that's a good tactic?

Thanks in advance.
 
   / 1998 Cub Cadet 7265 - HST Hydraulic Questions #2  
Sounds like its fine. Thats how hydrostats work. Let off go pedal to maintain the engine RPM. Try a lower gear range
 

Tractor & Equipment Auctions

14ft x 20ft Single Garage All Metal Building (New/Unused) (A59225)
14ft x 20ft Single...
Honda Pioneer 700 Utility Cart (A56857)
Honda Pioneer 700...
2016 FORD F-250 SUPER DUTY (A58214)
2016 FORD F-250...
PICKUP TOOLBOX (A58216)
PICKUP TOOLBOX...
2016 AutoHauler CX11HCSD T/A Car Hauler Trailer (A56857)
2016 AutoHauler...
HYDRAULIC THUMB CLAMP FOR MINI EXCAVATOR (A58214)
HYDRAULIC THUMB...
 
Top