Backhoe 2 Quick questions about my 3 pt backhoe

   / 2 Quick questions about my 3 pt backhoe #1  

DZLDamon

Member
Joined
Oct 13, 2010
Messages
32
Location
Maine
Tractor
Early 80's Kubota B8200
Hey guys,

Some of you fellows identified my Bolens 3 pt Backhoe as an older Woods unit, either BH650 or BH750 from some pictures I posted earlier. Thanks you very much! Now, I have 2 questions:

How can I determine if it's a 650 or 750? Any measurements I can take to be 100% sure?

Secondly: What kind of fluid should I get for the hydraulic tank? Is it 32 or 68 weight? Universal Differential/Transmission oil (10W20 I think)? Thanks a bunch fellahs.

-Luke
 
   / 2 Quick questions about my 3 pt backhoe #2  
Normally there models are close to the inches of digging depth.
 
   / 2 Quick questions about my 3 pt backhoe #3  
My 650/750 Manual states Use type A or F automatic transmission fluid, SAE 20W motor oil or #303 hydraulic fluid in this system...do not mix types of fluid. system capacity is approximately 5-5.5 gallons

The 650 can dig down 79.5 inches 750 91.8 "

Stabilizer spread 650 56.5 - 75 inches
750 52.5-89.5 inches (hmm..that's what it says!)
 
   / 2 Quick questions about my 3 pt backhoe
  • Thread Starter
#5  
Thanks a bunch gents! I should be able to get everything I need from there!
 
 

Tractor & Equipment Auctions

2008 Ford F-350 4x4 Ext. Cab Knapheide Service Truck (A59230)
2008 Ford F-350...
Toyota 8BPU15 3,000 LB Stand-On Electric Forklift (A59228)
Toyota 8BPU15...
HYDRAULIC AUGER FOR MINI EXCAVATOR (A58214)
HYDRAULIC AUGER...
2000 Kenworth W900 - 3406E CAT Engine - 78,980 Miles (A55302)
2000 Kenworth W900...
2013 Chevrolet Silverado 1500 Pickup Truck (A59230)
2013 Chevrolet...
TANK MANIFOLD (A55745)
TANK MANIFOLD (A55745)
 
Top