First time poster here. I recently inherited this tractor from my uncle and have been using it recently to tend to his cows. Last week the low oil pressure light came on and I immediately cut the tractor off. I’m kind of lost trying to fix it. Firstly I will be changing oil and filter this weekend as I’m unsure of previous maintenance done. If this doesn’t fix it I’ve been reading on here and other places to screw a gauge into the block to check pressure but don’t know where I would screw it into. Does anyone know where the pressure sensor should be? Any insight or help would be greatly appreciated!
2014 T4.75 Low oil pressure light (inherited tractor)
TractorTech
Elite Member
- Joined
- Jan 26, 2012
- Messages
- 2,721
- Location
- California
- Tractor
- Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer
- Joined
- Feb 21, 2003
- Messages
- 26,508
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Put an analog gage on it. Sensors aka: idiot lights are just that, idiots.
TractorTech
Elite Member
- Joined
- Jan 26, 2012
- Messages
- 2,721
- Location
- California
- Tractor
- Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer
ECU Not Detected on CAN bus.
Read this post:
www.tractorbynet.com
Read this post:
Farmall 70A - DTC 3157 (Resolved)
Farmall 70A no start – ADIC (Analog Digital Instrument Cluster) displayed “Stop Sign” icon and DTC 3157. Also, once, briefly displayed DTC 14901. The tractor had been sitting outside for about 10 days. DTC 3157 - ECU Not Detected on CAN bus. DTC 14901 – ECU not present • We visually...
www.tractorbynet.com
