Schultz
Gold Member
I noticed in my latest Northern Tool Catalog they are carring a full line of Robin/Suburu engines including the 22hp v-twin at a cost of $1,299.
Robin 22hp
Robin 22hp
22 Hp Robin Engine
- Thread starter Schultz
- Start date
- Views: 1234
Bob999
Platinum Member
The item pictured has the shaft on one end only. Doesn't PT mount pumps on both ends of the engine?
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,357
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
See taht plastic grill? Look at the shaft stub behind it. Cut a hole in the grill or remove it altogether. Now you have a shaft on each side of the motor.
Same thing for the Kohler.
Same thing for the Kohler.
bullitt
Member
The current Kohler and Robin engines do not exactly use a stub shaft on the flywheel side.
The engine side of the lovejoy style connector bolts directly to the flywheel with the flywheel bolts and uses the end of the shaft for the flywheel as a pilot to center the Lovejoy style connector.
The older Kohler motors did use a stub shaft on the flywheel. I do not know at what serial number the change was made to mounting the Lovejoy connector directly to the flywheel. If anyone needs the old Kohler stub shaft, I have one taking up space in the garage.
bullitt
The engine side of the lovejoy style connector bolts directly to the flywheel with the flywheel bolts and uses the end of the shaft for the flywheel as a pilot to center the Lovejoy style connector.
The older Kohler motors did use a stub shaft on the flywheel. I do not know at what serial number the change was made to mounting the Lovejoy connector directly to the flywheel. If anyone needs the old Kohler stub shaft, I have one taking up space in the garage.
bullitt
