2210 Factory Bagging System?
- Thread starter HSwan
- Start date
- Views: 6974
</font><font color="blue" class="small">( The 2210 & 2305 Bagging System now appears on the JD web site but according to my dealer not in thier books for ordering.
We are getting closer!
H )</font>
My dealer just called and they want a total of: $3,348.00 for the 54" mower deck, blower and bagger.
H
We are getting closer!
H )</font>
My dealer just called and they want a total of: $3,348.00 for the 54" mower deck, blower and bagger.
H
johndeere_2210
Gold Member
- Joined
- Mar 15, 2005
- Messages
- 288
A three bag system using the power flow from the deck is now available and list for $1,189.
cast_and_blast
Platinum Member
Does that include the powerflow blower that runs off the deck?
Is this showing up in the configurator?
Scott
Is this showing up in the configurator?
Scott
cast_and_blast
Platinum Member
Answered my own question - nope it doesn't. It's an additional $441 regardless of 54" or 62" deck.
Scott
Scott
GreenDeerJohn
Bronze Member
HSwan, I had a 445 with the 54"mmm and a Powerflow head with the MC519 collection cart. I used this setup at our previous home where we had a lot of mature trees. It worked wonderfully. I have since upgraded to a 2210 with the 62c mmm and I purchased another MC519 cart and PowerFlow head from the X-series. I then made a 3pt hitch to adapt the cart to the I-match. I can now carry the cart behind me or let it ride on its casters. When I go to dump the clippings, I can raise the cart ~40" off the ground and dump them on top of existing piles. I think the advantage of the MC519 type cart is that it casters behind the tractor so you don't have to worry about jack knifing a trailored collection system. I'm sure the other systems with the pony motors have a lot of power, but I've never had a problem with the PowerFlow head and MC519 cart. It works well and you don't have the additional noise of a pony motor and fan.
I had posted on this previously here http://www.tractorbynet.com/forums/showthread.php?t=57270
I'll try to post another photo for you.
John
I had posted on this previously here http://www.tractorbynet.com/forums/showthread.php?t=57270
I'll try to post another photo for you.
John
