2305 Caution Light Problem

[EasyE]

For the last three times I have cranked up my tractor the yellow caution lights come on and stay on? I have looked for any wiring problems that I could see from just looking around but nothing out of the ordinary. Anyone else have this issue with their 2305 or any JD tractor for that matter?

 

[bigtiller]

Sounds like a light switch is in your future

 

[kennyd]

Try spraying some WD40 in the ignition key switch.

 

[etcallhome]

you probably already checked but just wondering have you checked oil,transmission and antifreeze levels.

 

[davkir]

Hope this helps.

 

[Don87]

Be very careful with WD40 and electrical connections.
I drive truck, the satellite system quit working, so I pulled the plug on the 'globe'. It was slightly corroded. So I got out the only thing I had with me.....WD40.......and proceeded to spray the connectors, reconnected them several times to clean them, and all was well.........till the next day when I was in our shop.
The WD40 apparently caused a bridge between two elecrical ports and caught fire.

 

[Wacky]

I would try electric contact cleaner (Auto parts stores). Try in the switch connector and the pigtails for the lights.

 

[GarBear]

There are 2 diodes under the dash that can cause problems similar to what you are describing.

 

[EasyE]

Thanks folks for your help, I'm working on it.