3 point stabilizer adjustment
- Thread starter fsteyer
- Start date
- Views: 4264
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,537
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I'd look into extending the brackets under the axle down to give you an attachment point that is straight out from the lift arm pivot points. Fabricate the bracket and bolt it to the axle.
Must be some other Mitsibushi owners that have accomplished fabricating check chains.
They may work in the criss-cross pattern on the inside between the lift arms, but from the pics, they would be in the way of the PTO shaft if a rotary cutter were used.
Must be some other Mitsibushi owners that have accomplished fabricating check chains.
They may work in the criss-cross pattern on the inside between the lift arms, but from the pics, they would be in the way of the PTO shaft if a rotary cutter were used.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,537
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I'd look into extending the brackets under the axle down to give you an attachment point that is straight out from the lift arm pivot points. Fabricate the bracket and bolt it to the axle.
Must be some other Mitsibushi owners that have accomplished fabricating check chains.
They may work in the criss-cross pattern on the inside between the lift arms, but from the pics, they would be in the way of the PTO shaft if a rotary cutter were used.
Must be some other Mitsibushi owners that have accomplished fabricating check chains.
They may work in the criss-cross pattern on the inside between the lift arms, but from the pics, they would be in the way of the PTO shaft if a rotary cutter were used.
JerryG
Super Member
You would think that there would be, but some of the grays may not have the brackets. You may have to make some like Mad said above.
JerryG
Super Member
You would think that there would be, but some of the grays may not have the brackets. You may have to make some like Mad said above.