3 pr Hitch Hydraulic Pack

[bsekf]

After reading the FEL Mounted Brush Mower / Trimmer thread. Thread is old, does anybody make a PTO driven 3 point hydraulic pack so you can run skid steer FEL mounted implements? Fabricating one would be cost prohibitive. I built a FEL mounted York rake and it works great to clean up woods roads.

 

[old and tired]

Like this?

PTO Hydraulic Power Pack For Tractors IronCraft

Buy a auxiliary hydraulic PTO power pack for tractors. Mounted to the 3-point hitch and runs off the rear PTO. Power loader mounted cutters and snowblowers.

www.goodworkstractors.com

 

[bsekf]

How does the PTO disconnect? Is the pump on the tractor all the time? I expected something similar but with a PTO Shaft.

 

[ptsg]

How does the PTO disconnect? Is the pump on the tractor all the time? I expected something similar but with a PTO Shaft.

Usually the pump connects directly on the PTO shaft of the tractor, but it's easily installed/removed. I'm sure there are models that have the pump mounted on the power pack and just uses a regular PTO shaft.

 

[old and tired]

No pto shaft, As said above, the pump connects directly to the PTO shaft and chained down so it doesn't rotate.

Example of one:

https://www.amazon.com/dp/B082TWCFCB?th=1

 

[grsthegreat]

I have one made by Quick Attach. Works my front mount hydraulic snowblower

Attachments

• 
  side bracket 1 and 2.jpg

  2.2 MB · Views: 263
• 
  final rear powerpack 1.jpg

  1.8 MB · Views: 248

 

[jmc]

I didn't read that old thread but I'd be concerned if the hydraulic pack had enough weight for traction with a load on the FEL. Or traction on a slope.

 

[ptsg]

I didn't read that old thread but I'd be concerned if the hydraulic pack had enough weight for traction with a load on the FEL. Or traction on a slope.

Add some weight to it and make it double function. Hydraulic pack and counter weight.