3000 ford

robink · Sep 25, 2013

tractor seems a little weak on high side, I was pulling a harrow on sunday in 5th gear on slight hill seems to not have enough power is this normal for this size tractor or am I used to more power

LD1 · Sep 25, 2013

You need to provide more detail.

I cannot directly answer your question, but there were several transmissions in that tractor. Ranging from 3.6MPH in 5th up to 8mph in 5th gear. BIG difference. So for starters, what transmission do you have.

Second, how big is the harrow.

Third, what kind of power are you "used" to

Fourth, how does the tractor run otherwise? Gas or diesel? Any smoke? does it sound normal? start okay or need ether??

Fifth....you get the idea. We need more details. I cannot directly help with the problem, as I dont have a 3000 of any kind. But there isnt anyone who can help without knowing these questions I just asked.

Midniteoyl · Sep 25, 2013

The best pulling gears are 1U or 2, 3, or 4depending on which tranny.. TractorData.com Ford 3000 tractor tests information

Badbrad59 · Nov 15, 2013

Anyone know how to break the connection in front of the steering column on the rubber hydraulic line? Got a stick up under it while I was bush-hogging and the rubber broke. Appears to have bent the tubing at the bottom connection but I think I can work around that? I can get a couple of 7/8" wrenches on it but can't put any pressure on it.

Soundguy · Nov 15, 2013

maybee a pic to be a lil less cryptic?

are you just asking how to remove a power steering line.. or?

Badbrad59 · Nov 18, 2013

I don't have power steering. It is the rubber hydraulic hose from the pump on the left side of the engine to the right rear of tractor. I finally got it. Had to purchase a set of Crow Foot wrench attachments. Worked like a charm! Sorry I didn't get back with y'all sooner! Thanks anyway!