rockyridgefarm
Elite Member
Both PB and 3rd SCV give a rear hydraulic port. The PB is an all out flow that is not controlled by a valve, the device must have one. Usually backhoe, wood splitter or post driver.
3rd SCV is controlled by a valve and has a lower flow rate. Probably more useful.
3rd vs. 4th and 5th is just whatever. Price each as with the original deal and as an add later. I have a hard time not getting all the options, so I would talk myself into 7...
If I were doing things over, I would have ordered the midpto from the factory - and I have no use for it. It is far cheaper ordered as original, and adds resale value. But I doubt it is a deal breaker either way.
Cruise control is something you can easily add at any time.
3rd SCV is controlled by a valve and has a lower flow rate. Probably more useful.
3rd vs. 4th and 5th is just whatever. Price each as with the original deal and as an add later. I have a hard time not getting all the options, so I would talk myself into 7...
If I were doing things over, I would have ordered the midpto from the factory - and I have no use for it. It is far cheaper ordered as original, and adds resale value. But I doubt it is a deal breaker either way.
Cruise control is something you can easily add at any time.