this may have already been brung up before, but has anyone had this code come up before? It happens when I hit the cruise control, and after a while with it on, the hyd. (and hydrostatic)go into a very slow mode till the engine is shut off and restarted. As long as I don't hit the cruise it works fine.
3320 error code 5
- Thread starter tglass
- Start date
- Views: 12755
-
- Tags
- john deere 3320
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 3,962
- Location
- NW Oregon
- Tractor
- Bobcat T62, MT55, E42R, E10, John Deere 4100
Err 05 Brake and Cruise Set/Decel Switch. Cruise control Set/Decel switch depressed while brake is engaged. No cruise function. Release brake pedal; Contact your John Deere dealer.
Straight out of the manual. It sounds like an electrical problem, could there be a plug loose? My dad's 3720 has Err 15 and it was just a corroded wire.
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 3,962
- Location
- NW Oregon
- Tractor
- Bobcat T62, MT55, E42R, E10, John Deere 4100
If you have the serial number here is a link to the parts catalog which should have the right wiring diagram. :thumbsup: John Deere - Parts Catalog
Cocre
Gold Member
The technical manual adds;
Release brake pedal. Adjust or
repair brake switch. Check 247 Pur
wire and connections for short or
open circuit.
Release brake pedal. Adjust or
repair brake switch. Check 247 Pur
wire and connections for short or
open circuit.