3ph post pounder

[pickeringchris]

Anyone heard of a commercially made or home made "T post" pounder? I have seen the big post pounders online. I was thinking something small.

Cheers

 

[DJ54]

If you know someone that has a Shaver brand, thye make steel post holders, so as to drive them with one. Steel Post Holder for PD8 Each

Or, they make pneumatic ones, like Northern Hydraulics sells.http://www.northerntool.com/shop/tools/product_200398563_200398563?cm_mmc=Google-pla-_-Farm%20%2B%20Acreage-_-Fences%20%2B%20Gates-_-511001&ci_sku=511001&ci_gpa=pla&ci_kw={keyword}

Takes 2 CFM @ 80-100 psi.

 

[Robert_in_NY]

If you have a front loader and a helper you can just use the bucket to push the t-post in if you have any amount.

 

[Ken45101]

Not 3pt but I have a hand held pneumatic t-post pounder. It works well. I just toss the small generator and compressor in the back of the RTV.

 

[jshwhite]

If you have a front loader and a helper you can just use the bucket to push the t-post in if you have any amount.

Yep, I've pushed many a t-post in with the fel bucket and a helper. Fast and easy.

 

[zonta223]

One of the cheapest and quickest ways is to use an electric jackhammer powered by a generator........no fuss or strain (apart from lifting it to top of T post) just push the trigger and the weight of the hammer will drive the stake in.

The special cup to fit the hammer are not expensive. I prefer just the round cup to the ones with a T shape in them..............then you can also use them to drive steel poles etc.

 

[Ken45101]

Yep, I've pushed many a t-post in with the fel bucket and a helper. Fast and easy.

Then you are blessed with good ground :thumbsup: I've done it a few times when the ground is very soft and I'm lucky enough to miss any rocks. Other times, our ground is closer to concrete.

Ken

 

[pickeringchris]

Some really smart ideas here. I have seen the attachment for the jackhammer. Pretty hard to lift the jackhammer on top a 7' post.
My ground is soft with no rocks. I'm gonna try the loader and brave helper first. I only have 50 posts to do. Still, 50 is a lot for work with one of those 30lb pipe type pounders.

 

[Robert_in_NY]

Some really smart ideas here. I have seen the attachment for the jackhammer. Pretty hard to lift the jackhammer on top a 7' post.
My ground is soft with no rocks. I'm gonna try the loader and brave helper first. I only have 50 posts to do. Still, 50 is a lot for work with one of those 30lb pipe type pounders.

Just take it slow and unless someone does something really stupid its very hard to get hurt in this process.

 

[F250DSLPWR]

As a suggestion, check out the SDS hammer drills and 1" bit you can get at Harbor Freight for about $69. It is one of their tools that works really well. You can pre drill a 1" hole in the ground to make tapping in the T post by hand much easier. I will say a 1" hole is too small if drilling in rock or extreemly hard ground and you need the longest 1" bit HF has, about 14" long. For driving T posts into rock, you would need an SDS Max and 1.75" drill bit - a much more expensive setup. However, you might try renting one from a rental company. The SDS Max and a 3' - 1.75" bit is what we use in our solid limestone ground here in central Texas.
If you want to use the electric jack hammer with a cup, it works well, stand on the trucks tail gate and hook the jack hammer to a receiver hitch deer hoist. Now you can tilt the T post into the cup and stand it up and jack hammer it right on in.

 

[IndyIan]

Make sure you get the HD posts, I pulled a LD one out this weekend with the FEL and without really thinking put the bucket down a bit farther than needed and the post bent instantly even pushing from the middle of the post...
Also if you've never run a FEL on a tractor before I don't recommend the first project involve someone standing near the loader trying to hold a t-post. Its too easy to jerk the loader the wrong way and I'm still surprised by the power of it, you'll be able to fold posts at idle speed without trying at all. Also your parking brake won't even slow the tractor down if you have an HST in Low or Mid range, so maybe put the tractor in N or your feet away from the pedal if someone is near the loader, I've hit the Fwd pedal by reflex as its the brake pedal in my car and gave a tree a nice scar from the loader...

What would be neat is a post holder that contained the top 3 or 4' of the post to keep it from bending and then you just push the bucket down to ground level with no need for someone to stand up there.

 

[jshwhite]

Make sure you get the HD posts, I pulled a LD one out this weekend with the FEL and without really thinking put the bucket down a bit farther than needed and the post bent instantly even pushing from the middle of the post...
Also if you've never run a FEL on a tractor before I don't recommend the first project involve someone standing near the loader trying to hold a t-post. Its too easy to jerk the loader the wrong way and I'm still surprised by the power of it, you'll be able to fold posts at idle speed without trying at all. Also your parking brake won't even slow the tractor down if you have an HST in Low or Mid range, so maybe put the tractor in N or your feet away from the pedal if someone is near the loader, I've hit the Fwd pedal by reflex as its the brake pedal in my car and gave a tree a nice scar from the loader...

What would be neat is a post holder that contained the top 3 or 4' of the post to keep it from bending and then you just push the bucket down to ground level with no need for someone to stand up there.

Yes, forgot to mention that - if you hit hard ground or rocks, don't keep pushing. You can bend or even break a post by pushing too hard. Tried putting one into some hard dry ground with a big skid-steer once - bent the post right over. Shouldn't be a problem if you have decent soil though.

Never had a problem with using the HST. I just keep my foot on the rocker pedal and rarely even need to touch the brake. I've done a lot of work with the tractor and never had any problem. In my opinion, don't put it in N. To me it seems like a lot better control (and safer) to just feather the HST pedal and not bother switching back and forth from pedal to brake. Not criticizing, just my opinion.

I like the post holder idea. Maybe a FEL attachment that had a feeding system - load a bunch of posts in it, go along, push a post in, pull off of it and the next post drops in the holder. Hmm...sounds like a fun building project

 

[pickeringchris]

Great idea guys. I am pretty mechanically savy and could come up with something. I have something pictured in my mind as we speak. It would utilize a swivel arm that will find its own plumb and a magnet to hold the tpost in the tube. Having a real hard time thinking of an auto load system. Now that would be tricky. I wouldn't need it though. Just have a helper load the new post then back away.

 

[pickeringchris]

Looks like this is already invented.

http://www.bucketdriver.com/DRIVER-PRICES_c_1.html

 

[jshwhite]

Looks like this is already invented.

DRIVER PRICES

That's great! Thanks for posting this. You know, it would be really easy to just to take one of those hand drivers and convert it. In fact, I've got two of those hand drivers, so I'm just going to take one of them and make this out of it. At least sometime anyway

Thanks again for the idea.

 

[pickeringchris]

Looks like they use a spring for friction to hold the post in. Way smarter than a magnet.

Btw. I have been looking online for hours trying to find 1.33 lb galvanized posts. None here in Canada at the farm stores I visited have them. If anyone know of a place in NY state within 1 hour of buffalo please let me know. I hate the painted ones.

Chris

 

[k0ua]

Never had a problem with using the HST. I just keep my foot on the rocker pedal and rarely even need to touch the brake. I've done a lot of work with the tractor and never had any problem. In my opinion, don't put it in N. To me it seems like a lot better control (and safer) to just feather the HST pedal and not bother switching back and forth from pedal to brake. Not criticizing, just my opinion.

I second the motion of keep the HST in gear.. dont get in the habit of going to neutral. It can roll away with you pretty quick..best to just feather the hydro pedal. or lay your foot on the brakes.

James K0UA

 

[Robert_in_NY]

Looks like they use a spring for friction to hold the post in. Way smarter than a magnet.

Btw. I have been looking online for hours trying to find 1.33 lb galvanized posts. None here in Canada at the farm stores I visited have them. If anyone know of a place in NY state within 1 hour of buffalo please let me know. I hate the painted ones.

Chris

Contact a vineyard supply dealer. If your near Buffalo then I am sure you know there are a lot of vineyards in Canada and NY around here. You would probably have a better chance of finding these post in Canada though as the Canadian growers in the Niagara region use more t-posts then we do on this side of the lake.

 

[Robert_in_NY]

a quick search found this dealer in Ontario you may want to contact

Niagara fruit and Vegetable

Also here is a list of other dealers and companies you may find useful

Vineyard Industry Suppliers

 

[Jerry/MT]

Anyone heard of a commercially made or home made "T post" pounder? I have seen the big post pounders online. I was thinking something small.

Cheers

I have a Worksaver hydraulic driver that has a "T" post sleeve that will drive them. I use a regular hand driver for my "T" posts. They're like $30 at farm stores. I haven't use the hydraulic on "T" posts because the handrivers are so easy to use and cheap. I have 2 miles of fence lines and rocky ground.
You'll have some bucks in it if you get a pneumatic driver and quite frankly I can't see they are worth it unless you contracting for the highway department.
Your $'s, your choice.