4025 Curl Cylinder Problem

   / 4025 Curl Cylinder Problem #1  

hayboy48

Bronze Member
Joined
Feb 27, 2020
Messages
67
Location
West Central Alabama
Tractor
Mahandria 4025
HELP I was pushing brush and somehow the bucket release lever got puled on one side. It looks like I may have bent the cylinder rod or something. The left cylinder lacks about 2 in retracting all the way in. Works fine other than that. Can't get the bucket back on no way possible. Need some help identifying cyl and a good place to order without going to a dealer. 4025 with loader number 232
 
   / 4025 Curl Cylinder Problem #2  
I take it one side of your SSQA came undone and both sides are not in sync anymore....like this?

 
   / 4025 Curl Cylinder Problem
  • Thread Starter
#3  
That looks kind of simple and yes something out of kilter. Will try that maybe tomorrow. Thanks
 
   / 4025 Curl Cylinder Problem #4  
Yea, I am guessing you twisted the timing rod/tube and nothing at all wrong with the actual cylinders

Got any pics?
 
   / 4025 Curl Cylinder Problem
  • Thread Starter
#6  
Yep That’s my problem Bar showed no bend at all but a bare little turns into a lot at the top of the plate I sure am proud I don’t need a new cyl. Thanks and thanks again! I had tried to force the bucket on with a come along No way
2770B7E2-9209-44F0-8FA6-0BA81AFD3DAE.jpeg
 
   / 4025 Curl Cylinder Problem
  • Thread Starter
#7  
Was not simple. Had to use heat and a come a long, tractor hyd and board would not move is per video. Fixed now. You don't know how much nyou helped me. THANKS
 

Tractor & Equipment Auctions

Kennco Bedder Shapper (A50490)
Kennco Bedder...
2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
2015 International ProStar Truck, VIN # 3HSDJSNRXFN563873 (A48836)
2015 International...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A49346)
2025 Kivel 48in...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
1973 Ford 8000 Bucket Truck (A48836)
1973 Ford 8000...
 
Top