40x60 Metal Building Cost?

   / 40x60 Metal Building Cost? #52  
If you would like to look up steellite.com we can supply you a light gauge metal building.
 
   / 40x60 Metal Building Cost? #53  
I find myself going thru a similar process for a 48' x 64' x 12' pole building.

I am getting an initial price of $31,000 which includes a 16' x 10' O/H door and (2) man doors.

My initial thought was it seemed more expensive than it should be.

Yooper Dave
 
   / 40x60 Metal Building Cost? #54  
I find myself going thru a similar process for a 48' x 64' x 12' pole building.

I am getting an initial price of $31,000 which includes a 16' x 10' O/H door and (2) man doors.

My initial thought was it seemed more expensive than it should be.

Yooper Dave

Ya its too expensive cause the sales guy is making a killing!
 
   / 40x60 Metal Building Cost? #55  
I just had a building built by Cleary Building Corp. and I cannot believe how good the price and service was. I had them build a 30x40x10 and would do it again tomorrow. My sales specialist Don Zeal listened to what I wanted and put together a solution that met my budget and gave me great building. Don took the time to find out exactly what I was going to use the building for and provided suggestions to make sure the building would accomodate my needs. It was obvious that the crew that built the building took pride in the work. The were very neat and no detail was overlooked. A few of my neighbors suggested other building companies but either the price was too high or the high pressure sales pitch did not feel right. I hope to build another building in a few years and you can bet I will go with Cleary!:thumbsup:
 
Last edited:
   / 40x60 Metal Building Cost? #56  
I just had a building built by Cleary Building Corp. and I cannot believe how good the price and service was. I had them build a 30x40x10 and would do it again tomorrow. My sales specialist Don Zeal listened to what I wanted and put together a solution that met my budget and gave me great building. Don took the time to find out exactly what I was going to use the building for and provided suggestions to make sure the building would accomodate my needs. It was obvious that the crew that built the building took pride in the work. The were very neat and no detail was overlooked. A few of my neighbors suggested other building companies but either the price was too high or the high pressure sales pitch did not feel right. I hope to build another building in a few years and you can bet I will go with Cleary!:thumbsup:

Well that sure contradicts previous posts about Cleary on TBN. :laughing:
 
   / 40x60 Metal Building Cost? #57  
just search for a little more and it did not cost you a much. as now the metal building suppliers are also offering cheap rates with good services.
 
   / 40x60 Metal Building Cost? #58  
i have no idea for this, You need to talk the best company and ask with the concern person
 
   / 40x60 Metal Building Cost? #59  
We are searching for a turn key assembled 40' x 60' x 16' if possible on our cement pad. So far...most of the building sales people are not honest with their quotes. Buyer beware!
 
   / 40x60 Metal Building Cost? #60  
i have no idea for this, You need to talk the best company and ask with the concern person

Really?!?
This dude registered for the forum, to revive a thread that had been dead for over two years, so he could inform the OP that he had "no idea" on the answer to his question. That is awesome.
 

Tractor & Equipment Auctions

WOODS RC60.20 LOT NUMBER 88 (A53084)
WOODS RC60.20 LOT...
2019 Kenworth T270 Truck, VIN # 2NKHHM6X3KM358768 (A51572)
2019 Kenworth T270...
Yale MPB040-EN24T2748 4,000lbs Electric Walk-Behind Pallet Jack (A51691)
Yale...
LMC LOT NUMBER 143 (A53084)
LMC LOT NUMBER 143...
1269 (A50490)
1269 (A50490)
2003 International 4300 Dump Truck, VIN # 1HTMMAAL83H562953 (A51572)
2003 International...
 
Top