7 Pole Round Trailer Connector

[pyro29]

After reviewing the wiring diagram in the operations manual I noticed that there is nothing in the print about the 7 pin trailer connector. Does anyone have a copy of this portion of the diagram?

Thanks

 

[bluefin650]

It is a European 7 pin if that helps?? If you are looking for what the pins are, just google 7 pin.

 

[pyro29]

No, I can check the pins with a test light, I was more looking for a diagram to see where the power (Aux) feed came from, the wire size, and to see if and how it was protected from overload.

 

[ktmhans]

if only they had a constant power run to it. (((((

 

[George2615]

After reviewing the wiring diagram in the operations manual I noticed that there is nothing in the print about the 7 pin trailer connector. Does anyone have a copy of this portion of the diagram?

Thanks

I have a 7 pin round plug on my tractor (not Mahindra) but if you have the same it should be wired the same. Easy enough to check with a test light. Mine has power on one pin when the key is on. It is on a 15A circuit on my tractor.

 

[RickB]

No, I can check the pins with a test light, I was more looking for a diagram to see where the power (Aux) feed came from, the wire size, and to see if and how it was protected from overload.

Use a test light to identify the aux power pin. Short it out. Check the amperage of the blown fuse.
:cool2:

 

[burzynsr]

Use a test light to identify the aux power pin. Short it out. Check the amperage of the blown fuse.



I don't think I would just short it out to find the fuse. Your tractor probably has "electronics" in it and they are expensive to replace and **** to troubleshoot, just remove the gage panel and look at the back of it to see for yourself... Follow the wires or use your owners manual to eliminate the large majority of fuses. Pull the fuse you think might be the one and check for voltage. Shouldn't be but one or two to choose from.

 

[bluefin650]

I don't have my tractor here to test, but my guess is that the fog pin has 12v all the time.

 

[IH782]

I converted mine to a standard 7-way.

 

[bluefin650]

Did you happen to write down how you did it? Wire color to pin #? Was there plenty of slack in the wires to take the plug off and mount up the new one?