mxpapa
New member
- Joined
- Feb 4, 2014
- Messages
- 3
- Location
- east tx.
- Tractor
- 901 ford tractor, lincoln 180c mig, lincoln weldanpower 225/210 ac/dc welder, northern tool plasma.
Hi, finally replaced the tach with I think the correct one, but doesn't seem right. At idle it is showing about 1200rpm at low idle, I'm confused at how to read the dang thing. I't has the pto line and RPM of 536 and it doesn't idle down to that. Is there different gear pinions for the tach drive? It had the wrong meter on it that ran clockwise, as soon as I got it working it broke it running counter clockwise.
